[OpenWrt-Devel] python ctypes.util.find_library cannot find libc
Alexandru Ardelean
ardeleanalex at gmail.com
Thu Jan 19 11:49:05 EST 2017
I'm pretty sure the driver was selected.
I'll try to check a bit more in-depth.
In the meantime, did you try the
echo /usr/sbin/modprobe > /proc/sys/kernel/modprobe
?
On Thu, Jan 19, 2017 at 4:07 PM, Andrew McConachie <andrew at depht.com> wrote:
> Hi Alexandru,
>
> You're missing some kernel hardware driver. I'm not sure if the default
> compile options include kernel drivers for all HDDs, or for SATA/AHCI. You
> probably just need to include some extra kernel drivers in make menuconfig.
>
> --Andrew
>
>
> On 1/19/17 04:31, Alexandru Ardelean wrote:
>>
>> Hey,
>>
>> So, I've tried to run an OpenWrt system, x86_64,
>>
>> https://github.com/openwrt/openwrt/commit/4e53a6e9c560b54361f9ed3639e8d12f9ab8939d
>>
>> It was hanging on boot.
>> I've ran in Virtual Machine Manager with QEMU/KVM.
>> HDD emulation is SATA/AHCI [ I checked it's SATA/AHCI ]
>>
>> It looks to me that it's hanging at trying to mount root device
>> /dev/mtdblock0
>> Any thoughts ?
>>
>> [ 1.213897] ata4: SATA link down (SStatus 0 SControl 300)
>> [ 1.214781] ata2: SATA link down (SStatus 0 SControl 300)
>> [ 1.215572] ata6: SATA link down (SStatus 0 SControl 300)
>> [ 1.216359] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>> [ 1.217229] ata1.00: ATA-7: QEMU HARDDISK, 2.3.1, max UDMA/100
>> [ 1.217976] ata1.00: 31233 sectors, multi 16: LBA48 NCQ (depth 31/32)
>> [ 1.218787] ata1.00: applying bridge limits
>> [ 1.233284] ata1.00: configured for UDMA/100
>> [ 1.234233] ata5: SATA link down (SStatus 0 SControl 300)
>> [ 1.235915] ata3: SATA link down (SStatus 0 SControl 300)
>> [ 1.237371] scsi 0:0:0:0: Direct-Access ATA QEMU HARDDISK
>> 1 PQ: 0 ANSI: 5
>> [ 1.239155] sd 0:0:0:0: [sda] 31233 512-byte logical blocks: (16.0
>> MB/15.3 MiB)
>> [ 1.241487] sd 0:0:0:0: [sda] Write Protect is off
>> [ 1.242882] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
>> enabled, doesn't support DPO or FUA
>> [ 1.245329] sda: sda1 sda2
>> [ 1.245887] sda: p2 size 262144 extends beyond EOD, enabling native
>> capacity
>> [ 1.247232] sda: sda1 sda2
>> [ 1.247784] sda: p2 size 262144 extends beyond EOD, truncated
>> [ 1.248864] sd 0:0:0:0: [sda] Attached SCSI disk
>> [ 1.256721] block2mtd: erasesize must be a divisor of device size
>> [ 1.259958] rtc_cmos 00:00: setting system clock to 2017-01-19
>> 09:27:33 UTC (1484818053)
>> [ 1.261388] Waiting for root device /dev/mtdblock0...
>>
>> On Wed, Jan 18, 2017 at 6:05 PM, Alexandru Ardelean
>> <ardeleanalex at gmail.com> wrote:
>>>
>>> Hey,
>>>
>>> So, if you try on the system.
>>>
>>> echo /usr/sbin/modprobe > /proc/sys/kernel/modprobe
>>>
>>> Does it work ? I mean to just import iptc ?
>>> It worked for me, but I tried on a LEDE system (x86_64), which I'm
>>> hoping may be similar to OpenWrt.
>>>
>>> For me, the part that interests me the most, is if this is a bug
>>> within Python [ since I maintain it ], and it runs on both LEDE &
>>> OpenWrt.
>>>
>>> Will try to spin up a OpenWrt [just cloned trunk from Github ].
>>>
>>> And I'll try to reproduce.
>>> For reference ; Python is version 2.7.13
>>> It's from here: https://github.com/openwrt/packages
>>>
>>> I could not find hash 5ba298c in OpenWrt [
>>> https://github.com/openwrt/openwrt ] nor in packages [ link above ].
>>>
>>> Will come back with findings for OpenWrt.
>>>
>>> In the meantime, I will see about proposing a solution for updating
>>> /proc/sys/kernel/modprobe correctly for both LEDE & OpenWrt.
>>>
>>> Thanks
>>> Alex
>>>
>>>
>>>
>>> On Wed, Jan 18, 2017 at 4:38 PM, Andrew McConachie <andrew at depht.com>
>>> wrote:
>>>>
>>>> Hi 郭涛 and Alexandru,
>>>>
>>>> ldconfig depends on using eglibc to fulfill libc requirement.
>>>>
>>>> Symbol: PACKAGE_ldconfig [=n]
>>>> Type : tristate
>>>> Prompt: ldconfig............................... Shared library path
>>>> configuration
>>>> Location:
>>>> (3) -> Utilities
>>>> Defined at tmp/.config-package.in:82365
>>>> Depends on: !USE_MUSL [=y]
>>>>
>>>> If we make python depend on ldconfig, then are we saying python cannot
>>>> be
>>>> used with MUSL libc? I don't know what the default libc is for OpenWRT
>>>> or
>>>> whether one is considered experimental more than the other. But this is
>>>> something to consider.
>>>>
>>>> Thanks,
>>>> Andrew
>>>>
>>>>
>>>> On 1/18/17 03:32, 郭涛 wrote:
>>>>>
>>>>> Hi Andrew & Alexandru
>>>>>
>>>>> Forget the patch in prev mail, use attached patch instead.
>>>>>
>>>>> To use ctypes.util.find_library, you need one of gcc, ldconfig or
>>>>> objdump. I suggest you use ldconfig
>>>>>
>>>>> After install ldconfig, run ldconfig first to update cache
>>>>> then run ldconfig -p to show all of your libraries
>>>>> in my case, it shows:
>>>>>
>>>>> 195 libs found in cache `/etc/ld.so.cache' (version 1.7.0)
>>>>> uhttpd_tls.so (libc0) => /usr/lib/uhttpd_tls.so
>>>>> rclibrary.so (libc0) => /usr/lib/rclibrary.so
>>>>> libz.so.1 (libc0) => /usr/lib/libz.so.1
>>>>> libz.so (libc0) => /usr/lib/libz.so
>>>>> libyaml-0.so.2 (libc0) => /usr/lib/libyaml-0.so.2
>>>>> ......
>>>>>
>>>>> All libraries are libc0, that's why ctypes.util.find_library does not
>>>>> work on my platform
>>>>>
>>>>> You need to run 'uname -m' to get your matchine name and run 'ldconfig
>>>>> -p' to get library type.
>>>>> Atter all, append '$machine' : '$type' to mach_map list in
>>>>> ctypes/util.py and try find_library('pthread')
>>>>>
>>>>>
>>>>>>>> from ctypes.util import find_library
>>>>>>>>
>>>>>>>> find_library('pthread')
>>>>>
>>>>> 'libpthread.so.0'
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> 2017-01-17 22:22 GMT+08:00 Alexandru Ardelean <ardeleanalex at gmail.com>:
>>>>>>
>>>>>> Will give it a try.
>>>>>>
>>>>>> On Mon, Jan 16, 2017 at 9:41 PM, Andrew McConachie <andrew at depht.com>
>>>>>> wrote:
>>>>>>>
>>>>>>> Hi Alexandru and 郭涛,
>>>>>>>
>>>>>>> Attached is the Makefile I made for python-iptables. I can work
>>>>>>> around
>>>>>>> this
>>>>>>> by hardwiring library locations in the source of python-iptables, but
>>>>>>> I'd
>>>>>>> rather do it the correct way. To reproduce this build an OpenWrt
>>>>>>> system
>>>>>>> with
>>>>>>> this Makefile and then just create a simple Python script with
>>>>>>> 'import
>>>>>>> iptc'.
>>>>>>>
>>>>>>> I am cloning OpenWrt from Github and running make menuconfig;make to
>>>>>>> build
>>>>>>> everything. My Github version is about 6 days old with the last
>>>>>>> commit
>>>>>>> at
>>>>>>> 5ba298c.
>>>>>>>
>>>>>>> I also found that /proc/sys/kernel/modprobe contains /sbin/modprobe,
>>>>>>> while
>>>>>>> the modprobe binary is at /usr/sbin/modprobe. According to the Debian
>>>>>>> man
>>>>>>> page on proc(5), /proc/sys/kernel/modprobe should point to the
>>>>>>> modprobe
>>>>>>> binary. Googling about seems also to suggest that this file should
>>>>>>> contain
>>>>>>> the location of the modprobe binary. So I would say this is also a
>>>>>>> bug.
>>>>>>>
>>>>>>> Thanks!
>>>>>>> --Andrew
>>>>>>>
>>>>>>>
>>>>>>> On 1/16/17 07:23, Alexandru Ardelean wrote:
>>>>>>>>
>>>>>>>> Hey Andrew & 郭涛
>>>>>>>>
>>>>>>>> Sorry I did not answer sooner.
>>>>>>>>
>>>>>>>> @Andrew: do you have a Makefile for the python-iptables packages ?
>>>>>>>> I'd like to try to build it and see the issue. Or, are you just
>>>>>>>> using
>>>>>>>> that .py file ?
>>>>>>>> Can you give a bit more input on which Python version you're using,
>>>>>>>> and which OpenWrt version?
>>>>>>>>
>>>>>>>> If the issue is still present in the current packages trunk, I'd
>>>>>>>> like
>>>>>>>> to
>>>>>>>> fix it.
>>>>>>>> And if 郭涛's fix works, we can apply it to trunk.
>>>>>>>>
>>>>>>>> Thanks
>>>>>>>> Alex
>>>>>>>>
>>>>>>>>
>>>>>>>> On Mon, Jan 16, 2017 at 6:23 AM, 郭涛 <guotao945 at gmail.com> wrote:
>>>>>>>>>
>>>>>>>>> I also meet this issue.
>>>>>>>>> I fixed it using below change
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> https://github.com/gt945/Netgear-D7800-Openwrt-Packages/commit/fab71ca0ebf36d5f7b495b96f14d459e794b7224
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> 2017-01-13 0:43 GMT+08:00 Andrew McConachie <andrew at depht.com>:
>>>>>>>>>>
>>>>>>>>>> Hi OpenWRT Devs,
>>>>>>>>>>
>>>>>>>>>> I'm building an OpenWRT package for python-iptables for a project
>>>>>>>>>> I'm
>>>>>>>>>> working on and getting this error message when attempting to use
>>>>>>>>>> it.
>>>>>>>>>>
>>>>>>>>>> import iptc
>>>>>>>>>> File "/usr/lib/python2.7/site-packages/iptc/__init__.py",
>>>>>>>>>> line
>>>>>>>>>> 10, in
>>>>>>>>>> <module>
>>>>>>>>>> from ip4tc import (is_table_available, Table, Chain, Rule,
>>>>>>>>>> Match,
>>>>>>>>>> Target,
>>>>>>>>>> File "/usr/lib/python2.7/site-packages/iptc/ip4tc.py", line
>>>>>>>>>> 13,
>>>>>>>>>> in
>>>>>>>>>> <module>
>>>>>>>>>> from xtables import (XT_INV_PROTO, NFPROTO_IPV4,
>>>>>>>>>> XTablesError,
>>>>>>>>>> xtables,
>>>>>>>>>> File "/usr/lib/python2.7/site-packages/iptc/xtables.py", line
>>>>>>>>>> 677, in
>>>>>>>>>> <module>
>>>>>>>>>> _optind = ct.c_long.in_dll(_libc, "optind")
>>>>>>>>>> AttributeError: 'NoneType' object has no attribute '_handle'
>>>>>>>>>>
>>>>>>>>>> You can view xtables.py here if you're curious.
>>>>>>>>>> https://github.com/ldx/python-iptables/blob/master/iptc/xtables.py
>>>>>>>>>>
>>>>>>>>>> The problem is that my python-iptables package cannot find libc
>>>>>>>>>> functions
>>>>>>>>>> using ctypes.util.find_library(). I've tried building OpenWRT
>>>>>>>>>> using
>>>>>>>>>> both
>>>>>>>>>> musl and eglibc but neither work. I've also tried building OpenWRT
>>>>>>>>>> with
>>>>>>>>>> objdump and ldconfig. When I include ldconfig via 'make
>>>>>>>>>> menuconfig'
>>>>>>>>>> it
>>>>>>>>>> doesn't actually populate my OpenWRT image with an ldconfig
>>>>>>>>>> binary.
>>>>>>>>>> Maybe
>>>>>>>>>> this is the problem?
>>>>>>>>>>
>>>>>>>>>> This bug report looks similar to my problem, but it's about MIPS
>>>>>>>>>> and
>>>>>>>>>> marked
>>>>>>>>>> as closed.
>>>>>>>>>> https://dev.openwrt.org/ticket/20123
>>>>>>>>>>
>>>>>>>>>> Any help or pointers would be much appreciated.
>>>>>>>>>>
>>>>>>>>>> Thanks,
>>>>>>>>>> Andrew
>>>>>>>>>> _______________________________________________
>>>>>>>>>> openwrt-devel mailing list
>>>>>>>>>> openwrt-devel at lists.openwrt.org
>>>>>>>>>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>>> openwrt-devel mailing list
>>>>>>>>> openwrt-devel at lists.openwrt.org
>>>>>>>>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>>>>>>>
>>>>>>>
>
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list