[OpenWrt-Devel] dnscrypt-proxy package missing in snapshot

[Mangesh Bhamre]

Hi Alex,

ramips architecture. Mt7620 make file.

Regards
Mangesh

On 11-Feb-2017 4:56 PM, "Alexandru Ardelean" <ardeleanalex at gmail.com> wrote:

> Hey Mangesh,
>
> So, I don't use much ImageBuilder.
> I don't even know how that works.
>
> I usually just do
>
> < get OpenWrt repo >
> ./scripts/feeds update packages
> ./scripts/feeds install -a
> make menuconfig
> < select packages I need, configure arch, etc >
> make V=99 -j8
> < extract image from the bin directory >
>
> Looking through
> https://github.com/openwrt/packages/tree/master/net/dnscrypt-proxy
> It looks like dnscrypt-proxy should be there.
> But that's just the Makefile that builds the package.
>
> Does ImageBuilder install pre-built packages from an OpenWrt mirror ?
> Because on some architectures, dnscrypt-proxy looks broken.
>
> Example:
> http://buildbot.openwrt.org:8010/broken_packages/mpc85xx/
> http://buildbot.openwrt.org:8010/broken_packages/kirkwood/
> http://buildbot.openwrt.org:8010/broken_packages/bcm53xx/
> http://buildbot.openwrt.org:8010/broken_packages/ar71xx.mikrotik/
> http://buildbot.openwrt.org:8010/broken_packages/adm8668/
>
> On which architecture are you trying to build ?
> I understand you're trying to build on CC 15.05.1
>
> So, a bit more info about your setup could help.
>
>
> On Sat, Feb 11, 2017 at 7:35 AM, Mangesh Bhamre <mangesh at opennetware.com>
> wrote:
> > Hi Alex and OpenWRT Team,
> >
> > Any help on getting  dnscrypt-proxy package into snapshot will be
> helpful.
> > It is working fine with 15.05.1 - but not snapshot ImageBuilder.
> >
> > Regards,
> > Mangesh Bhamre
> >
> > On Tue, Feb 7, 2017 at 10:32 PM, Mangesh Bhamre <mangesh at opennetware.com
> >
> > wrote:
> >>
> >> Hi Alex,
> >>
> >> Snapshot don't have any reference of 'dnscrypt-proxy'. It is supported
> in
> >> CC 15.05.1 and I am able to add 'dnscrypt-proxy' in list of packages to
> >> include while building with CC Image-builder.
> >>
> >> I scanned through all snapshot image-builder and no reference there. I
> run
> >> following command to build - same works fine for CC 15.05.1
> >>
> >> make image PROFILE=Default PACKAGES="-wpad-mini wpad luci curl
> >> ca-certificates dnscrypt-proxy" FILES=/home/mangesh/files
> >>
> >> Surely no typo there.
> >>
> >> Regards,
> >> Mangesh
> >>
> >>
> >> On Tue, Feb 7, 2017 at 10:23 PM, Alexandru Ardelean
> >> <ardeleanalex at gmail.com> wrote:
> >>>
> >>> Do you have a Package/dnscrypt-proxy/install rule ?
> >>> Are you calling the BuildPackage rule ?
> >>>
> >>> Do you have Package/dnscrypt-proxy/description rule ?
> >>>
> >>> And check for typos if above stuff is checked.
> >>>
> >>> Thanks
> >>> Alex
> >>>
> >>>
> >>> On Tue, 7 Feb 2017 at 18:21, Mangesh Bhamre <mangesh at opennetware.com>
> >>> wrote:
> >>>>
> >>>> Hello OpenWRT team,
> >>>>
> >>>> I wish to bundle dnscrypt-proxy package using latest snapshot
> >>>> Image-builder. I get below errors. Please recommend a fix or address
> it in
> >>>> snapshot.
> >>>>
> >>>> Collected errors:
> >>>>  * opkg_install_cmd: Cannot install package dnscrypt-proxy.
> >>>> Makefile:146: recipe for target 'package_install' failed
> >>>>
> >>>> Regards,
> >>>> Mangesh
> >>>> _______________________________________________
> >>>> openwrt-devel mailing list
> >>>> openwrt-devel at lists.openwrt.org
> >>>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
> >>
> >>
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20170211/f6071ae1/attachment.htm>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel