[OpenWrt-Devel] Only first SSID has log_level=0

[Jakub Jančo]

TP-link 1043 has only one radio.
I have more SSIDs on this radio.

--
S pozdravom Jakub Janco


On Tue, Aug 8, 2017 at 9:13 PM, Jean-Michel Lacroix
<lacroix at lepine-lacroix.info> wrote:
> Wouldn't
>
> uci set wireless.radio1.log_level=0
>
> log the one from the second SSID?
>
> Jean-Michel
>
>
> ---
> Jean-Michel Lacroix
> 3303 place de Chazel
> Montréal (Québec)  H3M 1E2
> CANADA
>
> Le 2017-08-08 15:10, Jakub Jančo a écrit :
>>
>> Hello,
>>
>> I need to debug wireless connections so I set
>>
>> uci set wireless.radio0.log_level=0
>>
>> But this is logging only debug messages from first SSID, I need this
>> for all SSID on device.
>>
>> e.g.:
>> If I connect to first SSID(wlan0):
>> all daemon.debug mesages appears
>>
>>
>> If I connect to second AP(wlan0-1):
>> only daemon.info messages
>> IEEE 802.11: authenticated
>> IEEE 802.11: associated (aid 1)
>> WPA: pairwise key handshake completed (RSN)
>>
>> My setup:
>> TP-link 1043nd
>> OpenWRT 15.01.1
>> wpad full version
>>
>> What should I set to debug all?
>>
>> Thanks.
>>
>> --
>> S pozdravom Jakub Janco
>> _______________________________________________
>> openwrt-devel mailing list
>> openwrt-devel at lists.openwrt.org
>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel