[OpenWrt-Devel] [PATCH 0/8] lantiq: vr9 fxs support: Enable FXS support for VR9 based routers
Stefan Koch
stefan.koch10 at gmail.com
Mon Nov 7 16:38:48 EST 2016
Hi
This patchset was created for the OpenWrt GIT repository at:
git://git.openwrt.org/openwrt.git
For the new openwrt Github repository at:
git://github.com/openwrt/openwrt.git
I have created a pull request:
https://github.com/openwrt/openwrt/pull/143
I have created a patchset for the LEDE project, too.
It's already merged:
https://github.com/lede-project/source/pull/440
Notice: The last patch included in the pull request for the LEDE
project changes target/linux/lantiq/xrx200/config-default and must not
included into the OpenWrt tree. It conflicts with SMP that is enabled
only within OpenWrt XRX200 tree at Github.
Best regards
Stefan
2016-10-04 23:16 GMT+02:00 Stefan Koch <stefan.koch10 at gmail.com>:
> This patchset is based on an earlier patchset from Eddi De Pieri.
> It was committed to the OpenWRT BB branch in 11/2014.
> For details see description of single commits.
>
> The patchset allows using the FXS ports
> (for analogue telephones) from Lantiq VR9 based routers.
>
> If the VR9 based router provides FXS ports and they shoud enabled then the following must added to the kernel command line:
> mem=[TOTALMEMSIZE-2M] vpe1_load_addr=ADDRESS vpe1_mem=2M
>
> To use FXS 2M of RAM are needed for the VPE firmware. The size is given by vpe1_mem.
> The available RAM must be reduced by this size using the mem argument.
> A correct load address (example 0x83e00000) for the firmware must given, too.
>
> [PATCH 1/8] lantiq: vr9 fxs support: ltq-vmmc add support for ar9-vr9
> [PATCH 2/8] lantiq: vr9 fxs support: vr9: - fix vmmc build
> [PATCH 3/8] lantiq: vr9 fxs support: vr9: - modify dts to support
> [PATCH 4/8] lantiq: vr9 fxs support: vr9: add vpe/watchdog modules to
> [PATCH 5/8] lantiq: vr9 fxs support: falcon/vr9 - vpe softdog
> [PATCH 6/8] lantiq: vr9 fxs support: added support for VPE1
> [PATCH 7/8] lantiq: vr9 fxs support: added xrx200 as plattform for
> [PATCH 8/8] lantiq: vr9 fxs support: added xrx200 as plattform for
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list