[OpenWrt-Devel] ATH10K VLAN firmware issue

[Bruno Antunes]

On 7 November 2016 at 18:06, Valo, Kalle <kvalo at qca.qualcomm.com> wrote:
> Bruno Antunes <baantunes at gmail.com> writes:
>
>> On 4 November 2016 at 21:17, Valo, Kalle <kvalo at qca.qualcomm.com> wrote:
>>> Bruno Antunes <baantunes at gmail.com> writes:
>>>
>>>> Old thread but I think the issue is still present.
>>>>
>>>> I'm running a setup with VLANs with WDS and ath10k cards.
>>>>
>>>> To make it work both cards must be loaded in rawmode, AP
>>>> and Sta, and with no security.
>>>>
>>>> I'm using a OpenWrt trunk r49941 and the most recent firmware,
>>>> 10.2.4.70.58, from Kalle ath10k firmware tree.
>>>>
>>>> Although it works the throughput is very bad.
>>>> Are there any alternatives to improve the throughput.
>>>
>>> Can someone file a bug to bugzilla about this so that all the info is
>>> properly stored? The more comprehensive the report is the better.
>>>
>>> https://bugzilla.kernel.org/
>>
>> I will file a bug report.
>
> Thanks, it's good to store all in one place so that it's easier to find
> the relevant info.

Just file the bug with the ID 187241 -  VLAN support in ATH10k
Feel free to ask for adicional info.
I did not mention any names in the bug report fell free to take credit
if wanted.

Regards,
Bruno

>
>> But since it appears to be a firmware related issue
>> under what category can fill in the bug?
>
> You can file it under Drivers/network-wireless, AFAIK we don't have any
> separate components for firmware bugs. Here's one example to follow:
>
> https://bugzilla.kernel.org/show_bug.cgi?id=186161
>
> --
> Kalle Valo
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel