[OpenWrt-Devel] [PATCH] Chaos Calmer - ath71xx: Add support for the Comfast CF-WR650AC
Gareth Parker
gareth41 at orcon.net.nz
Wed May 4 06:57:16 EDT 2016
This patch adds support for the Comfast CF-WR650AC to Chaos Calmer.
More information is located at:
http://en.comfast.com.cn/product/SmartRepeater/item-217.html
I haven't been able to add this to Trunk as mac06_exchange_en is required
and was changed in r47956. Without it the router hangs then reboots when
accessing anything switch related, either through swconfig or luci.
Signed-off-by: Gareth Parker <gareth41 at orcon.net.nz>
diff --git
a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index e6fcec8..751b685 100644
---
a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++
b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -47,6 +47,10 @@ board=$(ar71xx_board_name)
case "$FIRMWARE" in
"ath10k/cal-pci-0000:00:00.0.bin")
case $board in
+ cf-wr650ac)
+ ath10kcal_extract "art" 20480 2116
+ ath10kcal_patch_mac $(macaddr_add $(cat
/sys/class/net/eth0/address) +3)
+ ;;
dlan-pro-1200-ac)
ath10kcal_extract "art" 20480 2116
;;
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
index a4b355a..6fa4813 100644
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
@@ -50,6 +50,11 @@ bsb)
ucidef_set_led_default "sys" "SYS" "bsb:red:sys" "1"
;;
+cf-wr650ac)
+ ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "comfast:blue:24g"
"phy1tpt"
+ ucidef_set_led_wlan "wlan5g" "WLAN 5 GHz" "comfast:blue:58g"
"phy0tpt"
+ ;;
+
bullet-m | \
nanostation-m | \
rocket-m | \
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
index b2e15bb..3ed8cf1 100755
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
@@ -64,6 +64,13 @@ tl-wdr4900-v2)
ucidef_add_switch_vlan "switch0" "2" "1 6"
;;
+cf-wr650ac)
+ ucidef_set_interfaces_lan_wan "eth0" "eth1"
+ ucidef_add_switch "switch0" "1" "1"
+ ucidef_add_switch_vlan "switch0" "1" "0 2 3 4 5"
+ ucidef_add_switch_vlan "switch0" "2" "1 6"
+ ;;
+
bsb)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
ucidef_add_switch "switch0" "1" "1"
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh
b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index dab4d2c..bdd76f9 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -396,6 +396,9 @@ ar71xx_board_detect() {
*CAP4200AG)
name="cap4200ag"
;;
+ *"CF-WR650AC")
+ name="cf-wr650ac"
+ ;;
*"CPE210/220/510/520")
name="cpe510"
tplink_pharos_board_detect
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index d025632..bbc06ab 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -400,6 +400,15 @@ platform_check_image() {
}
return 0
;;
+
+ cf-wr650ac)
+ [ "$magic_long" != "27051956" ] && {
+ echo "Invalid image type."
+ return 1
+ }
+ return 0
+ ;;
+
wndr3700 | \
wnr2000-v3 | \
wnr612-v2 | \
@@ -531,6 +540,7 @@ platform_do_upgrade() {
om5p-an)
platform_do_upgrade_openmesh "$ARGV"
;;
+ cf-wr650ac | \
unifi-outdoor-plus | \
uap-pro)
MTD_CONFIG_ARGS="-s 0x180000"
diff --git a/target/linux/ar71xx/config-3.18
b/target/linux/ar71xx/config-3.18
index e2ff826..11cd969 100644
--- a/target/linux/ar71xx/config-3.18
+++ b/target/linux/ar71xx/config-3.18
@@ -48,6 +48,7 @@ CONFIG_ATH79_MACH_BSB=y
CONFIG_ATH79_MACH_CAP4200AG=y
CONFIG_ATH79_MACH_CARAMBOLA2=y
CONFIG_ATH79_MACH_CPE510=y
+CONFIG_ATH79_MACH_CF_WR650AC=y
CONFIG_ATH79_MACH_DB120=y
CONFIG_ATH79_MACH_DGL_5500_A1=y
CONFIG_ATH79_MACH_DHP_1565_A1=y
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-cf-wr650ac.c
b/target/linux/ar71xx/files/arch/mips/ath79/mach-cf-wr650ac.c
new file mode 100644
index 0000000..2ffec13
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-cf-wr650ac.c
@@ -0,0 +1,196 @@
+/*
+ * COMFAST CF-WR650AC board support
+ *
+ * Copyright (C) 2016 Gareth Parker <gareth41 at orcon.net.nz>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as
published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/ath9k_platform.h>
+#include <linux/etherdevice.h>
+#include <linux/ar8216_platform.h>
+#include <linux/platform_data/phy-at803x.h>
+
+#include <asm/mach-ath79/irq.h>
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "dev-nfc.h"
+#include "gpio.h"
+#include "machtypes.h"
+#include "pci.h"
+
+#define CF_WR650AC_KEYS_POLL_INTERVAL 20 /* msecs */
+#define CF_WR650AC_KEYS_DEBOUNCE_INTERVAL (3 *
CF_WR650AC_KEYS_POLL_INTERVAL)
+
+#define CF_WR650AC_WATCHDOG_GPIO 17
+
+#define CF_WR650AC_GPIO_BTN_RESET_WPS 19
+
+#define CF_WR650AC_GPIO_LED_NETWORK 4
+#define CF_WR650AC_GPIO_LED_24G 13
+#define CF_WR650AC_GPIO_LED_58G 2
+#define CF_WR650AC_GPIO_LED_WPS 20
+
+#define CF_WR650AC_WMAC_CALDATA_OFFSET 0x1000
+#define CF_WR650AC_PCIE_CALDATA_OFFSET 0x5000
+
+#define CF_WR650AC_LAN_PHYMASK BIT(0)
+#define CF_WR650AC_WAN_PHYMASK BIT(5)
+
+static struct gpio_led cf_wr650ac_leds_gpio[] __initdata = {
+ {
+ .name = "comfast:blue:network",
+ .gpio = CF_WR650AC_GPIO_LED_NETWORK,
+ .active_low = 1,
+ },
+ {
+ .name = "comfast:blue:24g",
+ .gpio = CF_WR650AC_GPIO_LED_24G,
+ .active_low = 1,
+ },
+ {
+ .name = "comfast:blue:58g",
+ .gpio = CF_WR650AC_GPIO_LED_58G,
+ .active_low = 1,
+ },
+ {
+ .name = "comfast:blue:wps",
+ .gpio = CF_WR650AC_GPIO_LED_WPS,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button cf_wr650ac_gpio_keys[] __initdata = {
+ {
+ .desc = "Reset button/WPS button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = CF_WR650AC_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = CF_WR650AC_GPIO_BTN_RESET_WPS,
+ .active_low = 1,
+ },
+};
+
+static struct ar8327_pad_cfg cf_wr650ac_ar8327_pad0_cfg = {
+ /* GMAC0 of the AR8337 switch is connected to GMAC0 via RGMII */
+ .mode = AR8327_PAD_MAC_RGMII,
+ .txclk_delay_en = true,
+ .rxclk_delay_en = true,
+ .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
+ .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
+ .mac06_exchange_en = true,
+};
+
+static struct ar8327_pad_cfg cf_wr650ac_ar8327_pad6_cfg = {
+ /* GMAC6 of the AR8337 switch is connected to GMAC1 via SGMII */
+ .mode = AR8327_PAD_MAC_SGMII,
+ .rxclk_delay_en = true,
+ .rxclk_delay_sel = AR8327_CLK_DELAY_SEL0,
+};
+
+static struct ar8327_platform_data cf_wr650ac_ar8327_data = {
+ .pad0_cfg = &cf_wr650ac_ar8327_pad0_cfg,
+ .pad6_cfg = &cf_wr650ac_ar8327_pad6_cfg,
+ .port0_cfg = {
+ .force_link = 1,
+ .speed = AR8327_PORT_SPEED_1000,
+ .duplex = 1,
+ .txpause = 1,
+ .rxpause = 1,
+ },
+ .port6_cfg = {
+ .force_link = 1,
+ .speed = AR8327_PORT_SPEED_1000,
+ .duplex = 1,
+ .txpause = 1,
+ .rxpause = 1,
+ },
+};
+
+static struct mdio_board_info cf_wr650ac_mdio0_info[] = {
+ {
+ .bus_id = "ag71xx-mdio.0",
+ .phy_addr = 0,
+ .platform_data = &cf_wr650ac_ar8327_data,
+ },
+};
+
+static struct timer_list watchdog_timer;
+
+static void watchdog_gpio(unsigned long period)
+{
+ static int state;
+ state = !state;
+ gpio_set_value(CF_WR650AC_WATCHDOG_GPIO, state);
+ mod_timer(&watchdog_timer, jiffies + period);
+}
+
+static void __init cf_wr650ac_setup(void)
+{
+ u8 *art = (u8 *) KSEG1ADDR(0x1f020000);
+ u8 wlan0_mac[ETH_ALEN];
+ u8 wlan1_mac[ETH_ALEN];
+
+ gpio_request(CF_WR650AC_WATCHDOG_GPIO, "watchdog timer gpio");
+ gpio_direction_output(CF_WR650AC_WATCHDOG_GPIO, 0);
+ setup_timer(&watchdog_timer, watchdog_gpio, msecs_to_jiffies(500));
+ watchdog_gpio(msecs_to_jiffies(1));
+
+ ath79_register_m25p80(NULL);
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(cf_wr650ac_leds_gpio),
+ cf_wr650ac_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, CF_WR650AC_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(cf_wr650ac_gpio_keys),
+ cf_wr650ac_gpio_keys);
+
+ ath79_register_usb();
+
+ ath79_init_mac(wlan0_mac, art, 1);
+ ath79_init_mac(wlan1_mac, art, 3);
+
+ ath79_register_wmac(art + CF_WR650AC_WMAC_CALDATA_OFFSET,
wlan0_mac);
+
+ ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
+
+ ath79_register_mdio(0, 0x0);
+
+ mdiobus_register_board_info(cf_wr650ac_mdio0_info,
+ ARRAY_SIZE(cf_wr650ac_mdio0_info));
+
+ /* GMAC0 is connected to the RMGII interface */
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.phy_mask = CF_WR650AC_LAN_PHYMASK;
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+ ath79_eth0_pll_data.pll_1000 = 0xa6000000;
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, art, 0);
+ ath79_register_eth(0);
+
+ /* GMAC1 is connected to the SGMII interface */
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
+ ath79_eth1_data.speed = SPEED_1000;
+ ath79_eth1_data.duplex = DUPLEX_FULL;
+ ath79_eth1_pll_data.pll_1000 = 0x03000101;
+
+ ath79_init_mac(ath79_eth1_data.mac_addr, art, 2);
+ ath79_register_eth(1);
+
+ ap91_pci_init(art + CF_WR650AC_PCIE_CALDATA_OFFSET, wlan1_mac);
+}
+
+MIPS_MACHINE(ATH79_MACH_CF_WR650AC, "CF-WR650AC", "COMFAST CF-WR650AC",
+ cf_wr650ac_setup);
diff --git a/target/linux/ar71xx/generic/profiles/comfast.mk
b/target/linux/ar71xx/generic/profiles/comfast.mk
new file mode 100644
index 0000000..e79c475
--- /dev/null
+++ b/target/linux/ar71xx/generic/profiles/comfast.mk
@@ -0,0 +1,14 @@
+#
+# Copyright (C) 2009 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+define Profile/CF-WR650AC
+ NAME:=COMFAST CF-WR650AC
+ PACKAGES:=
+endef
+define Profile/CF-WR650AC/Description
+ Package set optimized for the COMFAST CF-WR650AC.
+endef
+$(eval $(call Profile,CF-WR650AC))
diff --git a/target/linux/ar71xx/image/Makefile
b/target/linux/ar71xx/image/Makefile
index 9a7acbd..81e8cd7 100644
--- a/target/linux/ar71xx/image/Makefile
+++ b/target/linux/ar71xx/image/Makefile
@@ -1043,6 +1043,7 @@
pb92_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,2752k(rootfs
),89
planex_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7744k(firm
ware),128k(art)ro
ubntxm_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7552k(firm
ware),256k(cfg)ro,64k(EEPROM)ro
uap_pro_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1536k(ker
nel),14208k(rootfs),256k(cfg)ro,64k(EEPROM)ro,15744k at 0x50000(firmware)
+qca9558_cf_wr650ac_mtdlayout=mtdparts=spi0.0:128k(u-boot)ro,64k(art)ro,1536
k(kernel),14592k(rootfs),64k(nvram)ro,16128k at 0x30000(firmware)
ubdev_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7488k(firmw
are),64k(certs),256k(cfg)ro,64k(EEPROM)ro
whrhpg300n_mtdlayout=mtdparts=spi0.0:248k(u-boot)ro,8k(u-boot-env)ro,3712k(f
irmware),64k(art)ro
wlr8100_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,1408k(ker
nel),14080k(rootfs),192k(unknown)ro,64k(art)ro,384k(unknown2)ro,15488k at 0x400
00(firmware)
@@ -1396,6 +1397,16 @@ define Image/Build/UAPPRO
-o $(call factoryname,$(1),$(2))
endef
+define Image/Build/COMFAST
+ $(call MkuImageLzma,$(2),$(3) $(4))
+ dd if=$(KDIR_TMP)/vmlinux-$(2).uImage \
+ of=$(call imgname,kernel,$(2)).bin bs=64k conv=sync; \
+ dd if=$(KDIR)/root.$(1) \
+ of=$(call imgname,$(1),$(2)-rootfs).bin bs=128k conv=sync; \
+ ( dd if=$(KDIR_TMP)/vmlinux-$(2).uImage bs=1572864 conv=sync; dd
if=$(KDIR)/root.$(1) ) \
+ > $(call imgname,$(1),$(2))-sysupgrade.bin
+endef
+
# $(4) = board (XS2, XS5, RS, XM)
# $(5) = series (BZ, XM, XW)
# $(6) = chip (ar7240, ar934x)
@@ -2064,6 +2075,8 @@ $(eval $(call
SingleProfile,TPLINK-SAFELOADER,64kraw,CPE510,cpe210-220-510-520,C
$(eval $(call
SingleProfile,UAPPRO,64k,UAPPRO,ubnt-uap-pro,UAP-PRO,ttyS0,115200,BZ,BZ,ar93
4x))
$(eval $(call
SingleProfile,UAPPRO,64k,UBNTUNIFIOUTDOORPLUS,ubnt-unifi-outdoor-plus,UBNT-U
OP,ttyS0,115200,BZ,BZ,ar7240))
+$(eval $(call
SingleProfile,COMFAST,64k,CF-WR650AC,cf-wr650ac,CF-WR650AC,ttyS0,115200,$$(q
ca9558_cf_wr650ac_mtdlayout),CF-WR650AC,qca955x))
+
$(eval $(call
SingleProfile,UBDEV,64kraw,UBDEV01,ubdev01,UBNT-UF,ttyS0,115200,UBDEV01,XM,a
r7240))
$(eval $(call
SingleProfile,UBNT,64k,UBNTRS,ubnt-rs,UBNT-RS,ttyS0,115200,RS,RSx,ar7100))
diff --git
a/target/linux/ar71xx/patches-3.18/610-MIPS-ath79-openwrt-machines.patch
b/target/linux/ar71xx/patches-3.18/610-MIPS-ath79-openwrt-machines.patch
index d6e786d..c33a838 100644
--- a/target/linux/ar71xx/patches-3.18/610-MIPS-ath79-openwrt-machines.patch
+++ b/target/linux/ar71xx/patches-3.18/610-MIPS-ath79-openwrt-machines.patch
@@ -1,6 +1,6 @@
--- a/arch/mips/ath79/machtypes.h
+++ b/arch/mips/ath79/machtypes.h
-@@ -16,22 +16,199 @@
+@@ -16,22 +16,200 @@
enum ath79_mach_type {
ATH79_MACH_GENERIC = 0,
@@ -26,6 +26,7 @@
+ ATH79_MACH_BHU_BXU2000N2_A1, /* BHU BXU2000n-2 A1 */
+ ATH79_MACH_CAP4200AG, /* Senao CAP4200AG */
+ ATH79_MACH_CARAMBOLA2, /* 8devices Carambola2 */
++ ATH79_MACH_CF_WR650AC, /* COMFAST CF-WR650AC */
+ ATH79_MACH_CPE510, /* TP-LINK CPE510 */
ATH79_MACH_DB120, /* Atheros DB120 reference board */
ATH79_MACH_PB44, /* Atheros PB44 reference board */
@@ -282,7 +283,7 @@
config ATH79_MACH_AP121
bool "Atheros AP121 reference board"
select SOC_AR933X
-@@ -11,62 +84,1050 @@ config ATH79_MACH_AP121
+@@ -11,62 +84,1060 @@ config ATH79_MACH_AP121
select ATH79_DEV_M25P80
select ATH79_DEV_USB
select ATH79_DEV_WMAC
@@ -349,6 +350,16 @@
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+
++config ATH79_MACH_CF_WR650AC
++ bool "COMFAST CF-WR650AC board support"
++ select SOC_QCA955X
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_USB
++ select ATH79_DEV_WMAC
++
+config ATH79_MACH_DB120
+ bool "Atheros DB120 reference board"
+ select SOC_AR934X
@@ -1494,7 +1505,7 @@
endif
--- a/arch/mips/ath79/Makefile
+++ b/arch/mips/ath79/Makefile
-@@ -38,9 +38,128 @@ obj-$(CONFIG_ATH79_ROUTERBOOT) += route
+@@ -38,9 +38,129 @@ obj-$(CONFIG_ATH79_ROUTERBOOT) += route
#
# Machines
#
@@ -1514,6 +1525,7 @@
+obj-$(CONFIG_ATH79_MACH_AW_NR580) += mach-aw-nr580.o
+obj-$(CONFIG_ATH79_MACH_BHU_BXU2000N2_A)+= mach-bhu-bxu2000n2-a.o
+obj-$(CONFIG_ATH79_MACH_CAP4200AG) += mach-cap4200ag.o
++obj-$(CONFIG_ATH79_MACH_CF_WR650AC) += mach-cf-wr650ac.o
+obj-$(CONFIG_ATH79_MACH_CPE510) += mach-cpe510.o
obj-$(CONFIG_ATH79_MACH_DB120) += mach-db120.o
+obj-$(CONFIG_ATH79_MACH_DLAN_PRO_500_WP) += mach-dlan-pro-500-wp.o
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list