[OpenWrt-Devel] [PATCH 3/6] ramips: Fix comment in rt3050 ethernet switch driver.
Vittorio Gambaletta (VittGam)
openwrt at vittgam.net
Sun May 1 23:34:53 EDT 2016
Line 444 is actually enabling all switch ports by setting the disable bits
to 0. This needs to be done because the bootloader sets all ports to disabled
by default (which is the case for at least one router based on RT5350).
So, this patch fixes the comment in line 443.
Signed-off-by: Vittorio Gambaletta <openwrt at vittgam.net>
---
--- /dev/null
+++ b/target/linux/ramips/patches-4.4/0517-net-mediatek-fix-comment-in-rt3050-ethernet-switch-d.patch
@@ -0,0 +1,24 @@
+From: Vittorio Gambaletta <openwrt at vittgam.net>
+Date: Fri, 01 Jan 2016 00:00:01 +0100
+Subject: [PATCH 2/3] net: mediatek: Fix comment in rt3050 ethernet switch driver.
+
+Line 444 is actually enabling all switch ports by setting the disable bits
+to 0. This needs to be done because the bootloader sets all ports to disabled
+by default (which is the case for at least one router based on RT5350).
+
+So, this patch fixes the comment in line 443.
+
+Signed-off-by: Vittorio Gambaletta <openwrt at vittgam.net>
+---
+
+--- a/drivers/net/ethernet/mediatek/esw_rt3050.c
++++ b/drivers/net/ethernet/mediatek/esw_rt3050.c
+@@ -440,7 +440,7 @@ static void esw_hw_init(struct rt305x_es
+ (RT305X_ESW_PORTS_ALL << RT305X_ESW_PFC1_EN_VLAN_S),
+ RT305X_ESW_REG_PFC1);
+
+- /* Enable Back Pressure, and Flow Control */
++ /* Enable all ports, Back Pressure and Flow Control */
+ esw_w32(esw, ((RT305X_ESW_PORTS_ALL << RT305X_ESW_POC0_EN_BP_S) |
+ (RT305X_ESW_PORTS_ALL << RT305X_ESW_POC0_EN_FC_S)),
+ RT305X_ESW_REG_POC0);
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list