[OpenWrt-Devel] [PATCH] [RFC] ar71xx: migrate cpe510 to new build steps
Alexander Couzens
lynxis at fe80.eu
Sun Feb 28 22:19:15 EST 2016
Signed-off-by: Alexander Couzens <lynxis at fe80.eu>
---
target/linux/ar71xx/image/Makefile | 92 ++++++++++++++++++--------------------
1 file changed, 44 insertions(+), 48 deletions(-)
diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile
index cb11104..b7b24df 100644
--- a/target/linux/ar71xx/image/Makefile
+++ b/target/linux/ar71xx/image/Makefile
@@ -73,6 +73,32 @@ define Build/mktplinkfw-initramfs
@mv $@.new $@
endef
+define Build/tplink-safeloader
+ -$(STAGING_DIR_HOST)/bin/tplink-safeloader \
+ -B $(TPLINK_BOARD_NAME) \
+ -V $(REVISION) \
+ -k $(word 1,$^) \
+ -r $@ \
+ -o $@.new \
+ $2 \
+ -j \
+ $(if $(findstring sysupgrade,$1),-S) && mv $@.new $@ || rm -f $@
+endef
+
+# using the CMDLINE here would bloat the loader with 512kb
+# models like the cpe510 doesn't support such big kernels
+define Build/loader-elf
+ rm -rf $@.src
+ $(MAKE) -C lzma-loader \
+ PKG_BUILD_DIR="$@.src" \
+ TARGET_DIR="$(dir $@)" LOADER_NAME="$(notdir $@)" \
+ BOARD="$(BOARDNAME)" \
+ LZMA_TEXT_START=0x80a00000 LOADADDR=0x80060000 \
+ $(1) compile loader.elf
+ mv "$@.elf" "$@"
+ rm -rf $@.src
+endef
+
define Build/loader-common
rm -rf $@.src
$(MAKE) -C lzma-loader \
@@ -93,6 +119,10 @@ define Build/loader-kernel
$(call Build/loader-common,LOADER_DATA="$@")
endef
+define Build/loader-kernel-elf
+ $(call Build/loader-elf,LOADER_DATA="$@")
+endef
+
define Build/loader-okli
dd if=$(KDIR)/loader-$(1).gz bs=7680 conv=sync of="$@.new"
cat "$@" >> "$@.new"
@@ -103,7 +133,7 @@ define Build/copy-file
cat "$(1)" > "$@"
endef
-DEVICE_VARS += TPLINK_HWID TPLINK_HWREV TPLINK_FLASHLAYOUT TPLINK_HEADER_VERSION
+DEVICE_VARS += TPLINK_HWID TPLINK_HWREV TPLINK_FLASHLAYOUT TPLINK_HEADER_VERSION TPLINK_BOARD_NAME
# UBNT_BOARD e.g. one of (XS2, XS5, RS, XM)
# UBNT_TYPE e.g. one of (BZ, XM, XW)
@@ -310,6 +340,19 @@ $(Device/tplink)
IMAGE_SIZE := 15872k
endef
+define Device/cpe210-220-510-520
+ MTDPARTS := spi0.0:128k(u-boot)ro,64k(pation-table)ro,64k(product-info)ro,1536k(kernel),6144k(rootfs),192k(config)ro,64k(ART)ro,7680k at 0x40000(firmware)
+ IMAGE_SIZE := 7680k
+ BOARDNAME := CPE510
+ TPLINK_BOARD_NAME := CPE510
+ KERNEL := kernel-bin | patch-cmdline | lzma | loader-kernel-elf
+ KERNEL_INITRAMFS := copy-file $(KDIR)/vmlinux-initramfs.bin.lzma | loader-kernel-elf
+ IMAGES := sysupgrade.bin factory.bin
+ IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade
+ IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
+endef
+TARGET_DEVICES += cpe210-220-510-520
+
define Device/tl-wdr4300-v1
$(Device/tplink-8mlzma)
BOARDNAME = TL-WDR4300
@@ -1491,28 +1534,6 @@ define Image/BuildLoader
endef
#
-# Embed patched lzma-compressed kernel inside lzma-loader.
-#
-# Specifying the command line via the lzma-loader doesn't work with some
-# models (like the TP-LINK CPE series), so this version first patches the
-# command line in the image and then builds the loader around it.
-#
-# $(1), suffix of output filename, e.g. generic, lowercase board name, etc.
-# $(2), suffix of target file to build, e.g. bin, gz, elf
-# $(3), kernel command line to pass from lzma-loader to kernel
-# $(4), unused here
-# $(5), suffix of kernel filename, e.g. -initramfs, or empty
-define Image/BuildLoaderPatched
- $(call PatchKernelLzma,$(1),$(3))
- -rm -rf $(KDIR)/lzma-loader
- $(LOADER_MAKE) LOADER=loader-$(1).$(2) \
- LZMA_TEXT_START=0x80a00000 LOADADDR=0x80060000 \
- LOADER_DATA="$(KDIR_TMP)/vmlinux-$(1)$(5).bin.lzma" BOARD="$(1)" \
- compile loader.$(2)
- -$(CP) $(KDIR)/loader-$(1).$(2) $(KDIR)/loader-$(1)$(5).$(2)
-endef
-
-#
# Build lzma-loader alone which will search for lzma-compressed kernel identified by
# uImage header with magic "OKLI" at boot time.
#
@@ -1561,7 +1582,6 @@ cameo_ap123_mtdlayout_4M=mtdparts=spi0.0:64k(u-boot)ro,64k(nvram)ro,3712k(firmwa
cameo_db120_mtdlayout=mtdparts=spi0.0:64k(uboot)ro,64k(nvram)ro,15936k(firmware),192k(lang)ro,64k(mac)ro,64k(art)ro
cameo_db120_mtdlayout_8M=mtdparts=spi0.0:64k(uboot)ro,64k(nvram)ro,7872k(firmware),128k(lang)ro,64k(art)ro
cap4200ag_mtdlayout=mtdparts=spi0.0:256k(u-boot),64k(u-boot-env),320k(custom)ro,1536k(kernel),12096k(rootfs),2048k(failsafe),64k(art),13632k at 0xa0000(firmware)
-cpe510_mtdlayout=mtdparts=spi0.0:128k(u-boot)ro,64k(pation-table)ro,64k(product-info)ro,1536k(kernel),6144k(rootfs),192k(config)ro,64k(ART)ro,7680k at 0x40000(firmware)
eap300v2_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),320k(custom),13632k(firmware),2048k(failsafe),64k(art)ro
db120_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1408k(kernel),64k(nvram),64k(art)ro,7744k at 0x50000(firmware)
dgl_5500_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,15296k(firmware),192k(lang)ro,512k(my-dlink)ro,64k(mac)ro,64k(art)ro
@@ -2019,28 +2039,6 @@ define Image/Build/Senao
$(call sysupname,$(1),$(2))
endef
-Image/Build/TPLINK-SAFELOADER/loader = $(call Image/BuildLoaderPatched,$(1),elf,$(2) $(3))
-
-define Image/Build/TPLINK-SAFELOADER
- [ -e "$(KDIR)/loader-$(2).elf" ]
-
- -$(STAGING_DIR_HOST)/bin/tplink-safeloader \
- -B $(5) \
- -k $(KDIR)/loader-$(2).elf \
- -r $(KDIR)/root.$(1) \
- -V $(REVISION) \
- -j \
- -o $(call factoryname,$(1),$(2))
- -$(STAGING_DIR_HOST)/bin/tplink-safeloader \
- -B $(5) \
- -k $(KDIR)/loader-$(2).elf \
- -r $(KDIR)/root.$(1) \
- -V $(REVISION) \
- -j -S \
- -o $(call sysupname,$(1),$(2))
-endef
-
-
define Image/Build/CyberTAN
echo -n '' > $(KDIR_TMP)/empty.bin
$(STAGING_DIR_HOST)/bin/trx -o $(KDIR)/image.tmp \
@@ -2481,8 +2479,6 @@ $(eval $(call SingleProfile,Seama,64k,QIHOO360,qihoo-c301,QIHOO-C301,ttyS0,11520
$(eval $(call SingleProfile,Senao,squashfs-only,EAP300V2,eap300v2,EAP300V2,ttyS0,115200,$$(eap300v2_mtdlayout)))
-$(eval $(call SingleProfile,TPLINK-SAFELOADER,64kraw,CPE510,cpe210-220-510-520,CPE510,ttyS0,115200,$$(cpe510_mtdlayout),CPE510))
-
$(eval $(call SingleProfile,WHRHPG300N,64kraw,WHRG301N,whr-g301n,WHR-G301N,ttyS0,115200,$$(whrhpg300n_mtdlayout),WHR-G301N))
$(eval $(call SingleProfile,WHRHPG300N,64kraw,WHRHPG300N,whr-hp-g300n,WHR-HP-G300N,ttyS0,115200,$$(whrhpg300n_mtdlayout),WHR-HP-G300N))
$(eval $(call SingleProfile,WHRHPG300N,64kraw,WHRHPGN,whr-hp-gn,WHR-HP-GN,ttyS0,115200,$$(whrhpg300n_mtdlayout),WHR-HP-GN))
--
2.7.2
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list