[OpenWrt-Devel] [PATCH 1/2] wwan: Add support for CDC (Huawei 'HiLink') Modems

[Torbjorn Jansson]

On 2016-02-23 08:11, Matti Laakso wrote:
>> Huawei HiLink ("h" model names) modems just provide a CDC Ethernet
>> interface
>> where we have to run DHCP to get an IP address (usually in the
>> 192.168.8.0
>> range). While this may be bad design in general it's sometimes
>> necessary to
>> support these modems.
>>
>> This adds autodetection and handling of these to wwan.
>>
>> Tested with Huawei E3030h-1.
>
> Why do you need an extra protocol for these? They work just fine with
> the regular DHCP protocol.
>

FYI the hilink modem i have (E3372) only works if you visit one of the 
pages on the usb sticks built in web server.
if you don't visit this page the stick never connects.

i have not yet found a good solution to this problem.
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel