[OpenWrt-Devel] [PATCH 4/4] ar71xx: WNR2000v3: add speed_mask to Ethernet port LED initialization

[Michal]

From: Michal Cieslakiewicz <michal.cieslakiewicz at wp.pl>
Subject: [PATCH 4/4] ar71xx: WNR2000v3: add speed_mask to Ethernet port LED initialization

This patch add speed_mask parameter to Ethernet port LED initialization
during system startup. LEDs are configured to show amber light for 10 Mbps
link and green for 100 Mbps as described on device label.

Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz at wp.pl>
---
 This patch is further development of WNR2000v3 support patches to OpenWrt.
 Therefore it requires to be applied on top of another patch described
 "[PATCH 8/8] ar71xx: WNR2000v3: enable control of all LEDs and buttons"

 target/linux/ar71xx/base-files/etc/board.d/01_leds | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
index 7374422..37ee3d3 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
@@ -680,14 +680,14 @@ wnr2000-v3)
 	ucidef_set_led_netdev "wan-amber" "WAN (amber)" "netgear:amber:wan" "eth0"
 	ucidef_set_led_default "wan-green" "WAN (green)" "netgear:green:wan" "0"
 	ucidef_set_led_netdev "wlan" "WLAN" "netgear:blue:wlan" "wlan0"
-	ucidef_set_led_switch "lan1green" "LAN1 (green)" "netgear:green:lan1" "switch0" "0x02"
-	ucidef_set_led_switch "lan2green" "LAN2 (green)" "netgear:green:lan2" "switch0" "0x04"
-	ucidef_set_led_switch "lan3green" "LAN3 (green)" "netgear:green:lan3" "switch0" "0x08"
-	ucidef_set_led_switch "lan4green" "LAN4 (green)" "netgear:green:lan4" "switch0" "0x10"
-	ucidef_set_led_default "lan1amber" "LAN1 (amber)" "netgear:amber:lan1" "0"
-	ucidef_set_led_default "lan2amber" "LAN2 (amber)" "netgear:amber:lan2" "0"
-	ucidef_set_led_default "lan3amber" "LAN3 (amber)" "netgear:amber:lan3" "0"
-	ucidef_set_led_default "lan4amber" "LAN4 (amber)" "netgear:amber:lan4" "0"
+	ucidef_set_led_switch "lan1green" "LAN1 (green)" "netgear:green:lan1" "switch0" "0x02" "0x04"
+	ucidef_set_led_switch "lan2green" "LAN2 (green)" "netgear:green:lan2" "switch0" "0x04" "0x04"
+	ucidef_set_led_switch "lan3green" "LAN3 (green)" "netgear:green:lan3" "switch0" "0x08" "0x04"
+	ucidef_set_led_switch "lan4green" "LAN4 (green)" "netgear:green:lan4" "switch0" "0x10" "0x04"
+	ucidef_set_led_switch "lan1amber" "LAN1 (amber)" "netgear:amber:lan1" "switch0" "0x02" "0x02"
+	ucidef_set_led_switch "lan2amber" "LAN2 (amber)" "netgear:amber:lan2" "switch0" "0x04" "0x02"
+	ucidef_set_led_switch "lan3amber" "LAN3 (amber)" "netgear:amber:lan3" "switch0" "0x08" "0x02"
+	ucidef_set_led_switch "lan4amber" "LAN4 (amber)" "netgear:amber:lan4" "switch0" "0x10" "0x02"
 	;;
 
 wnr2000-v4)
-- 
2.6.4
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel