[OpenWrt-Devel] AR9344 Openwrt - LAN and WAN interface link issue

[Afkar Rafique]

Hi,

When I connect only LAN cable and check below command on console
"cat /sys/class/net/eth0.1/carrier"
will get "1"
its correct but when we check "cat /sys/class/net/eth0.2/carrier" even the
only LAN cable is connected it returns "1" but i didn't connect the WAN
cable.

The same thing if we connect only WAN cable and check "cat
/sys/class/net/eth0.1/carrier" and "cat /sys/class/net/eth0.2/carrier" both
returns "1" . But it should not be like this.

Any help would be appreciate.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20151028/79bd6704/attachment.htm>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel