[OpenWrt-Devel] [PATCH] Wallys DR-344 support
Philippe DUCHEIN
wireless-dev at duchein.net
Tue Oct 27 10:25:21 EDT 2015
This patch is for Wallys DR344 support under OpenWRT
Signed-off-by: Philippe DUCHEIN <wireless-dev at duchein.net>
—
diff -Nru a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
--- a/target/linux/ar71xx/base-files/etc/diag.sh 2015-10-27 11:22:05.851103540 +0100
+++ b/target/linux/ar71xx/base-files/etc/diag.sh 2015-10-27 11:27:41.138057656 +0100
@@ -347,6 +347,9 @@
wp543)
status_led="wp543:green:diag"
;;
+ dr344)
+ status_led="dr344:green:status"
+ ;;
wpj344)
status_led="wpj344:green:status"
;;
diff -Nru a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network 2015-10-27 11:22:05.846103482 +0100
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network 2015-10-27 11:30:35.631113903 +0100
@@ -404,6 +404,10 @@
ucidef_set_interfaces_lan_wan "eth1" "eth0"
;;
+dr344)
+ ucidef_set_interface_lan "eth0 eth1"
+ ;;
+
wpj344)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"
diff -Nru a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh 2015-10-27 11:22:05.874103812 +0100
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh 2015-10-27 11:27:41.138057656 +0100
@@ -889,6 +889,9 @@
*WPJ344)
name="wpj344"
;;
+ *DR344)
+ name="dr344"
+ ;;
*WPJ531)
name="wpj531"
;;
diff -Nru a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh 2015-10-27 11:22:05.862103670 +0100
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh 2015-10-27 11:27:41.139057668 +0100
@@ -240,6 +240,7 @@
wpj531 | \
wndap360 | \
wpj344 | \
+ dr344 | \
wzr-hp-g300nh2 | \
wzr-hp-g300nh | \
wzr-hp-g450h | \
diff -Nru a/target/linux/ar71xx/config-4.1 b/target/linux/ar71xx/config-4.1
--- a/target/linux/ar71xx/config-4.1 2015-10-27 11:22:06.234108060 +0100
+++ b/target/linux/ar71xx/config-4.1 2015-10-27 11:27:41.139057668 +0100
@@ -18,6 +18,7 @@
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_AT803X_PHY=y
+CONFIG_ATHEROS_PHY=y
CONFIG_ATH79=y
CONFIG_ATH79_DEV_AP9X_PCI=y
CONFIG_ATH79_DEV_DSA=y
@@ -158,6 +159,7 @@
CONFIG_ATH79_MACH_WP543=y
CONFIG_ATH79_MACH_WPE72=y
CONFIG_ATH79_MACH_WPJ344=y
+CONFIG_ATH79_MACH_DR344=y
CONFIG_ATH79_MACH_WPJ531=y
CONFIG_ATH79_MACH_WPJ558=y
CONFIG_ATH79_MACH_WRT160NL=y
diff -Nru a/target/linux/ar71xx/files/arch/mips/ath79/mach-dr344.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-dr344.c
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-dr344.c 1970-01-01 01:00:00.000000000 +0100
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-dr344.c 2015-10-27 11:27:41.139057668 +0100
@@ -0,0 +1,183 @@
+/*
+ * Wallys DR344 board support
+ *
+ * Copyright (c) 2015 Philippe DUCHEIN <pduchein at gmail.com>
+ * Copyright (c) 2011 Qualcomm Atheros
+ * Copyright (c) 2011-2012 Gabor Juhos <juhosg at openwrt.org>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include <linux/phy.h>
+#include <linux/platform_device.h>
+#include <linux/ath9k_platform.h>
+#include <linux/ar8216_platform.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "pci.h"
+#include "dev-ap9x-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-eth.h"
+#include "dev-usb.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-spi.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define DR344_GPIO_LED_SIG1 15
+#define DR344_GPIO_LED_SIG2 20
+#define DR344_GPIO_LED_SIG3 21
+#define DR344_GPIO_LED_SIG4 22
+#define DR344_GPIO_EXTERNAL_LNA0 18
+#define DR344_GPIO_EXTERNAL_LNA1 19
+#define DR344_GPIO_LED_STATUS 14
+
+#define DR344_GPIO_BTN_RESET 12
+
+#define DR344_KEYS_POLL_INTERVAL 20 /* msecs */
+#define DR344_KEYS_DEBOUNCE_INTERVAL (3 * DR344_KEYS_POLL_INTERVAL)
+
+#define DR344_MAC0_OFFSET 0
+#define DR344_MAC1_OFFSET 6
+#define DR344_WMAC_CALDATA_OFFSET 0x1000
+#define DR344_PCIE_CALDATA_OFFSET 0x5000
+
+static struct gpio_led dr344_leds_gpio[] __initdata = {
+ {
+ .name = "dr344:green:status",
+ .gpio = DR344_GPIO_LED_STATUS,
+ .active_low = 1,
+ },
+ {
+ .name = "dr344:red:sig1",
+ .gpio = DR344_GPIO_LED_SIG1,
+ .active_low = 1,
+ },
+ {
+ .name = "dr344:yellow:sig2",
+ .gpio = DR344_GPIO_LED_SIG2,
+ .active_low = 1,
+ },
+ {
+ .name = "dr344:green:sig3",
+ .gpio = DR344_GPIO_LED_SIG3,
+ .active_low = 1,
+ },
+ {
+ .name = "dr344:green:sig4",
+ .gpio = DR344_GPIO_LED_SIG4,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button dr344_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = DR344_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = DR344_GPIO_BTN_RESET,
+ .active_low = 1,
+ },
+};
+
+static struct ar8327_pad_cfg dr344_ar8327_pad0_cfg = {
+ .mode = AR8327_PAD_MAC_RGMII,
+ .txclk_delay_en = true,
+ .rxclk_delay_en = true,
+ .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
+ .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
+};
+
+static struct ar8327_led_cfg dr344_ar8327_led_cfg = {
+ .led_ctrl0 = 0x00000000,
+ .led_ctrl1 = 0xc737c737,
+ .led_ctrl2 = 0x00000000,
+ .led_ctrl3 = 0x00c30c00,
+ .open_drain = true,
+};
+
+static struct ar8327_platform_data dr344_ar8327_data = {
+ .pad0_cfg = &dr344_ar8327_pad0_cfg,
+ .port0_cfg = {
+ .force_link = 1,
+ .speed = AR8327_PORT_SPEED_1000,
+ .duplex = 1,
+ .txpause = 1,
+ .rxpause = 1,
+ },
+ .led_cfg = &dr344_ar8327_led_cfg,
+};
+
+static struct mdio_board_info dr344_mdio0_info[] = {
+ {
+ .bus_id = "ag71xx-mdio.0",
+ .phy_addr = 0,
+ .platform_data = &dr344_ar8327_data,
+ },
+};
+
+static void __init dr344_setup(void)
+{
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+
+ ath79_register_m25p80(NULL);
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(dr344_leds_gpio),
+ dr344_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, DR344_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(dr344_gpio_keys),
+ dr344_gpio_keys);
+
+ ath79_register_usb();
+ ath79_wmac_set_ext_lna_gpio(0, DR344_GPIO_EXTERNAL_LNA0);
+
+
+ ath79_wmac_set_ext_lna_gpio(1, DR344_GPIO_EXTERNAL_LNA1);
+
+
+ ath79_register_wmac(art + DR344_WMAC_CALDATA_OFFSET, NULL);
+
+ ath79_register_pci();
+
+ mdiobus_register_board_info(dr344_mdio0_info,
+ ARRAY_SIZE(dr344_mdio0_info));
+
+ ath79_register_mdio(1, 0x0);
+ ath79_register_mdio(0, 0x0);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, art + DR344_MAC0_OFFSET, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, art + DR344_MAC1_OFFSET, 0);
+
+ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
+ AR934X_ETH_CFG_SW_ONLY_MODE);
+
+ /* GMAC0 is connected to an AR8327 switch */
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.phy_mask = BIT(0);
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+ ath79_eth0_pll_data.pll_1000 = 0x06000000;
+
+ /* GMAC1 is connected to the internal switch */
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+ ath79_eth1_data.speed = SPEED_1000;
+ ath79_eth1_data.duplex = DUPLEX_FULL;
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+}
+
+MIPS_MACHINE(ATH79_MACH_DR344, "DR344", "Wallys DR344", dr344_setup);
diff -Nru a/target/linux/ar71xx/generic/profiles/wallys.mk b/target/linux/ar71xx/generic/profiles/wallys.mk
--- a/target/linux/ar71xx/generic/profiles/wallys.mk 1970-01-01 01:00:00.000000000 +0100
+++ b/target/linux/ar71xx/generic/profiles/wallys.mk 2015-10-27 11:27:41.139057668 +0100
@@ -0,0 +1,17 @@
+#
+# Copyright (C) 2015 Philippe DUCHEIN <pduchein at gmail.com>
+# Copyright (C) 2009 OpenWrt.org
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/DR344
+ NAME:=Wallys DR344
+endef
+
+define Profile/DR344/Description
+ Package set optimized for the Wallys DR344 board.
+endef
+
+$(eval $(call Profile,DR344))
+
diff -Nru a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile
--- a/target/linux/ar71xx/image/Makefile 2015-10-27 11:22:06.230108013 +0100
+++ b/target/linux/ar71xx/image/Makefile 2015-10-27 11:27:41.139057668 +0100
@@ -1457,6 +1457,7 @@
whrhpg300n_mtdlayout=mtdparts=spi0.0:248k(u-boot)ro,8k(u-boot-env)ro,3712k(firmware),64k(art)ro
wlr8100_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),14080k(rootfs),192k(unknown)ro,64k(art)ro,384k(unknown2)ro,15488k at 0x40000(firmware)
wpj344_mtdlayout_16M=mtdparts=spi0.0:192k(u-boot)ro,16128k(firmware),64k(art)ro
+dr344_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1408k(kernel),64k(nvram),64k(art)ro,7744k at 0x50000(firmware)
wpj531_mtdlayout_16M=mtdparts=spi0.0:192k(u-boot)ro,16128k(firmware),64k(art)ro
wpj558_mtdlayout_16M=mtdparts=spi0.0:192k(u-boot)ro,16128k(firmware),64k(art)ro
wndap360_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1728k(kernel),6016k(rootfs),64k(nvram)ro,64k(art)ro,7744k at 0x50000(firmware)
@@ -2293,6 +2294,7 @@
$(eval $(call SingleProfile,AthLzma,64k,TUBE2H16M,tube2h-16M,TUBE2H,ttyATH0,115200,$$(alfa_mtdlayout_16M),KRuImage,65536))
$(eval $(call SingleProfile,AthLzma,64k,WLR8100,wlr8100,WLR8100,ttyS0,115200,$$(wlr8100_mtdlayout),KRuImage))
$(eval $(call SingleProfile,AthLzma,64k,WPJ344_16M,wpj344-16M,WPJ344,ttyS0,115200,$$(wpj344_mtdlayout_16M),KRuImage,65536))
+$(eval $(call SingleProfile,AthLzma,64k,DR344,dr344,DR344,ttyS0,115200,$$(dr344_mtdlayout),RKuImage))
$(eval $(call SingleProfile,AthLzma,64k,WPJ531_16M,wpj531-16M,WPJ531,ttyS0,115200,$$(wpj531_mtdlayout_16M),KRuImage,65536))
$(eval $(call SingleProfile,AthLzma,64k,WPJ558_16M,wpj558-16M,WPJ558,ttyS0,115200,$$(wpj558_mtdlayout_16M),KRuImage,65536))
@@ -2424,6 +2426,7 @@
$(eval $(call MultiProfile,WP543,WP543_2M WP543_4M WP543_8M WP543_16M))
$(eval $(call MultiProfile,WPE72,WPE72_4M WPE72_8M WPE72_16M))
$(eval $(call MultiProfile,WPJ344,WPJ344_16M))
+
$(eval $(call MultiProfile,WPJ531,WPJ531_16M))
$(eval $(call MultiProfile,WPJ558,WPJ558_16M))
diff -Nru a/target/linux/ar71xx/patches-4.1/701-MIPS-ath79-openwrt-dr344.patch b/target/linux/ar71xx/patches-4.1/701-MIPS-ath79-openwrt-dr344.patch
--- a/target/linux/ar71xx/patches-4.1/701-MIPS-ath79-openwrt-dr344.patch 1970-01-01 01:00:00.000000000 +0100
+++ b/target/linux/ar71xx/patches-4.1/701-MIPS-ath79-openwrt-dr344.patch 2015-10-27 11:44:47.189134768 +0100
@@ -0,0 +1,295 @@
+--- a/arch/mips/ath79/machtypes.h 2015-09-07 12:39:52.070426175 +0200
++++ b/arch/mips/ath79/machtypes.h 2015-09-07 12:41:03.181395126 +0200
+@@ -220,6 +220,7 @@
+ ATH79_MACH_WZR_450HP2, /* Buffalo WZR-450HP2 */
+ ATH79_MACH_ZCN_1523H_2, /* Zcomax ZCN-1523H-2-xx */
+ ATH79_MACH_ZCN_1523H_5, /* Zcomax ZCN-1523H-5-xx */
++ ATH79_MACH_DR344, /* Wallys DR344 */
+ };
+
+ #endif /* _ATH79_MACHTYPE_H */
+--- a/arch/mips/ath79/Kconfig 2015-09-07 12:47:19.239505173 +0200
++++ b/arch/mips/ath79/Kconfig 2015-09-07 12:48:35.322536257 +0200
+@@ -371,6 +371,16 @@
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
++config ATH79_MACH_DR344
++ bool "Wallys DR344 board support"
++ select SOC_AS934X
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_USB
++ select ATH79_DEV_WMAC
++
+ config ATH79_MACH_WPJ531
+ bool "Compex WPJ531 board support"
+ select SOC_QCA953X
+--- a/arch/mips/ath79/Makefile 2015-09-07 12:43:35.519467968 +0200
++++ b/arch/mips/ath79/Makefile 2015-09-07 12:44:15.198007230 +0200
+@@ -171,3 +171,4 @@
+ obj-$(CONFIG_ATH79_MACH_ZCN_1523H) += mach-zcn-1523h.o
+ obj-$(CONFIG_ATH79_MACH_CARAMBOLA2) += mach-carambola2.o
+ obj-$(CONFIG_ATH79_MACH_NBG6716) += mach-nbg6716.o
++obj-$(CONFIG_ATH79_MACH_DR344) += mach-dr344.o
+diff -Nru a/arch/mips/ath79/mach-dr344.c b/arch/mips/ath79/mach-dr344.c
+--- a/arch/mips/ath79/mach-dr344.c 2015-09-18 04:40:26.332357634 -0700
++++ b/arch/mips/ath79/mach-dr344.c 2015-09-18 23:47:29.312975398 -0700
+@@ -25,7 +25,7 @@
+ #include <linux/ar8216_platform.h>
+
+ #include <asm/mach-ath79/ar71xx_regs.h>
+-
++#include <linux/platform_data/phy-at803x.h>
+ #include "common.h"
+ #include "pci.h"
+ #include "dev-ap9x-pci.h"
+@@ -92,43 +92,18 @@
+ .active_low = 1,
+ },
+ };
+-
+-static struct ar8327_pad_cfg dr344_ar8327_pad0_cfg = {
+- .mode = AR8327_PAD_MAC_RGMII,
+- .txclk_delay_en = true,
+- .rxclk_delay_en = true,
+- .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
+- .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
+-};
+-
+-static struct ar8327_led_cfg dr344_ar8327_led_cfg = {
+- .led_ctrl0 = 0x00000000,
+- .led_ctrl1 = 0xc737c737,
+- .led_ctrl2 = 0x00000000,
+- .led_ctrl3 = 0x00c30c00,
+- .open_drain = true,
+-};
+-
+-static struct ar8327_platform_data dr344_ar8327_data = {
+- .pad0_cfg = &dr344_ar8327_pad0_cfg,
+- .port0_cfg = {
+- .force_link = 1,
+- .speed = AR8327_PORT_SPEED_1000,
+- .duplex = 1,
+- .txpause = 1,
+- .rxpause = 1,
+- },
+- .led_cfg = &dr344_ar8327_led_cfg,
+-};
+-
+-static struct mdio_board_info dr344_mdio0_info[] = {
+- {
+- .bus_id = "ag71xx-mdio.0",
+- .phy_addr = 0,
+- .platform_data = &dr344_ar8327_data,
+- },
+-};
+-
++ static struct at803x_platform_data dr344_ar8035_data = {
++ .enable_rgmii_tx_delay = 1,
++ .enable_rgmii_rx_delay = 1,
++ };
++
++ static struct mdio_board_info dr344_mdio0_info[] = {
++ {
++ .bus_id = "ag71xx-mdio.0",
++ .phy_addr = 0,
++ .platform_data = &dr344_ar8035_data,
++ },
++ };
+ static void __init dr344_setup(void)
+ {
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+@@ -151,9 +126,9 @@
+
+ ath79_register_mdio(1, 0x0);
+ ath79_register_mdio(0, 0x0);
+-
+- ath79_init_mac(ath79_eth0_data.mac_addr, art + DR344_MAC0_OFFSET, 0);
+- ath79_init_mac(ath79_eth1_data.mac_addr, art + DR344_MAC1_OFFSET, 0);
++
++ ath79_init_mac(ath79_eth0_data.mac_addr, (u8 *)0xbf03f810, 0);
++ ath79_init_mac(ath79_eth1_data.mac_addr, (u8 *)0xbf03f818, 0);
+
+ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
+ AR934X_ETH_CFG_SW_ONLY_MODE);
+@@ -162,8 +137,10 @@
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.phy_mask = BIT(0);
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+- ath79_eth0_pll_data.pll_1000 = 0x06000000;
+-
++ ath79_eth0_pll_data.pll_1000 = 0x0e000000;
++ ath79_eth0_pll_data.pll_100 = 0x0101;
++ ath79_eth0_pll_data.pll_10 = 0x1313;
++
+ /* GMAC1 is connected to the internal switch */
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+ ath79_eth1_data.speed = SPEED_1000;
+
+
+
+diff -Nru linux-4.1.11.org/drivers/net/phy/atheros.c linux-4.1.11/drivers/net/phy/atheros.c
+--- linux-4.1.11.org/drivers/net/phy/atheros.c 1969-12-31 16:00:00.000000000 -0800
++++ linux-4.1.11/drivers/net/phy/atheros.c 2015-09-18 23:48:18.972973326 -0700
+@@ -0,0 +1,133 @@
++/*
++ * Driver for Atheros PHYs
++ *
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ *
++ */
++
++#include <linux/module.h>
++#include <linux/delay.h>
++#include <linux/skbuff.h>
++#include <linux/phy.h>
++#include <asm/mach-ath79/ath79.h>
++
++/* Phy Specific status fields */
++#define ATHER_STATUS_LINK_MASK 0xC000
++#define ATHER_STATUS_LINK_SHIFT 14
++#define ATHER_STATUS_FULL_DUPLEX 0x2000
++#define ATHR_STATUS_LINK_PASS 0x0400
++#define ATHR_STATUS_RESOVLED 0x0800
++
++#define ATHR_PHY_SPEC_STATUS 17
++#define ATHR_DEBUG_PORT_ADDRESS 29
++#define ATHR_DEBUG_PORT_DATA 30
++
++static u16 debug0 = 0x14e;
++static u16 debug5 = 0x147;
++static u16 debug5_1000 = 0x0;
++
++static int ar8035_config_init(struct phy_device *phydev)
++{
++ phy_write(phydev, MII_BMCR, BMCR_RESET | BMCR_ANENABLE);
++ return 0;
++}
++
++static int ar8035_read_status(struct phy_device *phydev)
++{
++ int status;
++
++ status = phy_read(phydev, ATHR_PHY_SPEC_STATUS);
++ if (status < 0)
++ return status;
++
++ if ((status & ATHR_STATUS_LINK_PASS) && (status & ATHR_STATUS_RESOVLED)) {
++ phydev->link = 1;
++ } else {
++ phydev->link = 0;
++ }
++
++ if ( phydev->link ) {
++ if (status & ATHER_STATUS_FULL_DUPLEX)
++ phydev->duplex = DUPLEX_FULL;
++ else
++ phydev->duplex = DUPLEX_HALF;
++
++ status = ((status & ATHER_STATUS_LINK_MASK) >> ATHER_STATUS_LINK_SHIFT);
++ switch(status) {
++ case 0:
++ if ( phydev->speed != SPEED_10 ) {
++ phy_write(phydev, ATHR_DEBUG_PORT_ADDRESS, 0x0);
++ phy_write(phydev, ATHR_DEBUG_PORT_DATA, debug0);
++ phy_write(phydev, ATHR_DEBUG_PORT_ADDRESS, 0x5);
++ phy_write(phydev, ATHR_DEBUG_PORT_DATA, debug5);
++ phydev->speed = SPEED_10;
++ }
++ break;
++ case 1:
++ if ( phydev->speed != SPEED_100 ) {
++ phy_write(phydev, ATHR_DEBUG_PORT_ADDRESS, 0x0);
++ phy_write(phydev, ATHR_DEBUG_PORT_DATA, debug0);
++ phy_write(phydev, ATHR_DEBUG_PORT_ADDRESS, 0x5);
++ phy_write(phydev, ATHR_DEBUG_PORT_DATA, debug5);
++ phydev->speed = SPEED_100;
++ }
++ break;
++ case 2:
++ if ( phydev->speed != SPEED_1000 ) {
++ phy_write(phydev, ATHR_DEBUG_PORT_ADDRESS, 0x0);
++ phy_write(phydev, ATHR_DEBUG_PORT_DATA, debug0);
++ phy_write(phydev, ATHR_DEBUG_PORT_ADDRESS, 0x5);
++ phy_write(phydev, ATHR_DEBUG_PORT_DATA, debug5_1000);
++ phydev->speed = SPEED_1000;
++ }
++ break;
++ }
++ }
++
++ return 0;
++}
++
++
++static struct phy_driver ar8035_phy_driver = {
++ .phy_id = 0x004dd072,
++ .name = "Atheros AR8035",
++ .phy_id_mask = 0xffffffff,
++ .features = PHY_GBIT_FEATURES,
++ .config_init = ar8035_config_init,
++ .config_aneg = genphy_config_aneg,
++ .read_status = ar8035_read_status,
++ .driver = {
++ .owner = THIS_MODULE,
++ },
++};
++
++static int __init atheros_phy_init(void)
++{
++ if ( ath79_soc == ATH79_SOC_AR7130 ||
++ ath79_soc == ATH79_SOC_AR7141 ||
++ ath79_soc == ATH79_SOC_AR7161 ) {
++ debug0 = 0x82EE;
++ debug5 = 0x2D47;
++ debug5_1000 = 0x2D47;
++ }
++ return phy_driver_register(&ar8035_phy_driver);
++}
++
++static void __exit atheros_phy_exit(void)
++{
++ phy_driver_unregister(&ar8035_phy_driver);
++}
++
++#ifdef MODULE
++module_init(atheros_phy_init);
++module_exit(atheros_phy_exit);
++#else
++subsys_initcall(atheros_phy_init);
++#endif
++
++MODULE_DESCRIPTION("Atheros PHY driver");
++MODULE_LICENSE("GPL v2");
++
+diff -Nru linux-4.1.11.org/drivers/net/phy/Kconfig linux-4.1.11/drivers/net/phy/Kconfig
+--- linux-4.1.11.org/drivers/net/phy/Kconfig 2015-09-18 23:45:39.496979979 -0700
++++ linux-4.1.11/drivers/net/phy/Kconfig 2015-09-18 23:48:18.972973326 -0700
+@@ -133,6 +133,10 @@
+ ---help---
+ Supports the KSZ9021, VSC8201, KS8001 PHYs.
+
++config ATHEROS_PHY
++ tristate "Driver for Atheros PHYs"
++ ---help---
++ Supports the AR8035 PHY.
+ config ADM6996_PHY
+ tristate "Driver for ADM6996 switches"
+ select SWCONFIG
+diff -Nru linux-4.1.11.org/drivers/net/phy/Makefile linux-4.1.11/drivers/net/phy/Makefile
+--- linux-4.1.11.org/drivers/net/phy/Makefile 2015-09-18 23:45:39.496979979 -0700
++++ linux-4.1.11/drivers/net/phy/Makefile 2015-09-18 23:48:18.952973327 -0700
+@@ -31,6 +31,7 @@
+ obj-$(CONFIG_RTL8367_PHY) += rtl8367.o
+ obj-$(CONFIG_RTL8367B_PHY) += rtl8367b.o
+ obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o
++obj-$(CONFIG_ATHEROS_PHY) += atheros.o
+ obj-$(CONFIG_PSB6970_PHY) += psb6970.o
+ obj-$(CONFIG_B53) += b53/
+ obj-$(CONFIG_FIXED_PHY) += fixed_phy.o
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list