[OpenWrt-Devel] AR9344 Openwrt + check Multiple condition /etc/config/system

[Afkar Rafique]

I am working on AR9344 Openwrt. I have configured the status led based on
eth0.2 trigger in /etc/config/system

config led 'Status_led'
        option name 'Status_led'
        option interval '50'
        option sysfs 'db120:green:status'
        option default '0'
        option trigger 'netdev'
        option mode 'link tx rx'
        option dev 'eth0.2'

I have configured GPIO16 as input. I want to check both condition as below:

if( (GPIO16 is high) &&
   (eth0.2 is high) )
{
  Status Led ON
}
else
{
  status led OFF
}

I need to check both condition to ON/OFF Status LED.

Could anyone help me to write both condition to ON/OFF Status LED.

Any help would be appreciate.
Regards,
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20151022/3b4b1cdf/attachment.htm>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel