[OpenWrt-Devel] [PATCH] target/ramips: NixCore X1 Board Support

[John Crispin]

On 15/10/2015 17:49, Andrew Gaylo wrote:
> from: Andrew Gaylo <admin at clisystems.com>
> 
> This submission is for support of the NixCore X1 board at
> http://nixcores.com.  This board uses the RT5350 Ralink processor
> already supported by a number of boards in the OpenWRT repository.
> 
> Signed-off-by: Andrew Gaylo <admin at clisystems.com>



i think the dts file is missing



> ---
> diff -uprN
> openwrt_vanilla/target/linux/ramips/base-files/etc/board.d/02_network
> openwrt_submit/target/linux/ramips/base-files/etc/board.d/02_network
> ---
> openwrt_vanilla/target/linux/ramips/base-files/etc/board.d/02_network   
> 2015-10-13 11:10:15.784957130 -0600
> +++
> openwrt_submit/target/linux/ramips/base-files/etc/board.d/02_network   
> 2015-10-15 08:35:48.341341581 -0600
> @@ -217,7 +217,7 @@ ramips_setup_interfaces()
>          ucidef_add_switch_vlan "switch0" "1" "0t 1 2 3 4"
>          ucidef_add_switch_vlan "switch0" "2" "0t 5"
>          ;;
> -
> +    nixcorex1 |\
>      vocore)
>          ucidef_set_interface_lan "eth0.1"
>          ucidef_add_switch "switch0" "1" "1"
> diff -uprN openwrt_vanilla/target/linux/ramips/base-files/lib/ramips.sh
> openwrt_submit/target/linux/ramips/base-files/lib/ramips.sh
> --- openwrt_vanilla/target/linux/ramips/base-files/lib/ramips.sh   
> 2015-10-13 11:10:15.784957130 -0600
> +++ openwrt_submit/target/linux/ramips/base-files/lib/ramips.sh   
> 2015-10-15 08:36:21.021340613 -0600
> @@ -232,6 +232,9 @@ ramips_board_detect() {
>      *"Nexx WT3020")
>          name="wt3020"
>          ;;
> +    *"NixcoreX1")
> +        name="nixcorex1"
> +        ;;
>      *"NW718")
>          name="nw718"
>          ;;
> diff -uprN
> openwrt_vanilla/target/linux/ramips/base-files/lib/upgrade/platform.sh
> openwrt_submit/target/linux/ramips/base-files/lib/upgrade/platform.sh
> ---
> openwrt_vanilla/target/linux/ramips/base-files/lib/upgrade/platform.sh    2015-10-13
> 11:10:15.784957130 -0600
> +++
> openwrt_submit/target/linux/ramips/base-files/lib/upgrade/platform.sh   
> 2015-10-15 08:37:00.029339459 -0600
> @@ -72,6 +72,7 @@ platform_check_image() {
>      mr-102n | \
>      mzk-w300nh2 | \
>      nbg-419n | \
> +    nixcorex1 | \
>      nw718 | \
>      omni-emb | \
>      omni-emb-hpm | \
> diff -uprN openwrt_vanilla/target/linux/ramips/image/Makefile
> openwrt_submit/target/linux/ramips/image/Makefile
> --- openwrt_vanilla/target/linux/ramips/image/Makefile    2015-10-13
> 11:10:15.788957130 -0600
> +++ openwrt_submit/target/linux/ramips/image/Makefile    2015-10-15
> 08:37:25.885338693 -0600
> @@ -569,6 +569,8 @@ Image/Build/Profile/MZKW300NH2=$(call Bu
> 
>  Image/Build/Profile/NCS601W=$(call
> BuildFirmware/Default8M/$(1),$(1),ncs601W,NCS601W)
> 
> +Image/Build/Profile/NIXCORE-X1=$(call
> BuildFirmware/Default8M/$(1),$(1),nixcorex1,NIXCORE-X1)
> +
>  nw718_mtd_size=3801088
>  Image/Build/Profile/NW718=$(call
> BuildFirmware/CustomFlashFactory/$(1),$(1),nw718m,NW718,$(nw718_mtd_size),ARA1B4NCRNW718;1,factory)
> 
> 
> @@ -741,6 +743,7 @@ define Image/Build/Profile/Default
>      $(call Image/Build/Profile/MZKW300NH2,$(1))
>      $(call Image/Build/Profile/NBG-419N,$(1))
>      $(call Image/Build/Profile/NCS601W,$(1))
> +    $(call Image/Build/Profile/NIXCORE-X1,$(1))
>      $(call Image/Build/Profile/NW718,$(1))
>      $(call Image/Build/Profile/OMNI-EMB,$(1))
>      $(call Image/Build/Profile/OMNI-PLUG,$(1))
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel