[OpenWrt-Devel] [PATCH 2/2] lantiq: Print the status register whenever an error occurs

[Martin Blumenstingl]

This should help finding potential problems with the SPI driver.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
---
 .../lantiq/patches-3.18/0033-SPI-MIPS-lantiq-adds-spi-xway.patch      | 4 +++-
 .../linux/lantiq/patches-4.1/0033-SPI-MIPS-lantiq-adds-spi-xway.patch | 4 +++-
 2 files changed, 6 insertions(+), 2 deletions(-)

diff --git a/target/linux/lantiq/patches-3.18/0033-SPI-MIPS-lantiq-adds-spi-xway.patch b/target/linux/lantiq/patches-3.18/0033-SPI-MIPS-lantiq-adds-spi-xway.patch
index 9cc9349..81e5d39 100644
--- a/target/linux/lantiq/patches-3.18/0033-SPI-MIPS-lantiq-adds-spi-xway.patch
+++ b/target/linux/lantiq/patches-3.18/0033-SPI-MIPS-lantiq-adds-spi-xway.patch
@@ -42,7 +42,7 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
 +obj-$(CONFIG_SPI_XWAY)			+= spi-xway.o
 --- /dev/null
 +++ b/drivers/spi/spi-xway.c
-@@ -0,0 +1,975 @@
+@@ -0,0 +1,977 @@
 +/*
 + * Lantiq SoC SPI controller
 + *
@@ -744,6 +744,8 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
 +	/* Disable all interrupts */
 +	ltq_spi_reg_clearbit(hw, LTQ_SPI_IRNEN_ALL, LTQ_SPI_IRNEN);
 +
++	dev_err(hw->dev, "error %x\n", ltq_spi_reg_read(hw, LTQ_SPI_STAT));
++
 +	/* Clear all error flags */
 +	ltq_spi_reg_write(hw, LTQ_SPI_WHBSTATE_CLR_ERRORS, LTQ_SPI_WHBSTATE);
 +
diff --git a/target/linux/lantiq/patches-4.1/0033-SPI-MIPS-lantiq-adds-spi-xway.patch b/target/linux/lantiq/patches-4.1/0033-SPI-MIPS-lantiq-adds-spi-xway.patch
index ffcc95e..5325b83 100644
--- a/target/linux/lantiq/patches-4.1/0033-SPI-MIPS-lantiq-adds-spi-xway.patch
+++ b/target/linux/lantiq/patches-4.1/0033-SPI-MIPS-lantiq-adds-spi-xway.patch
@@ -42,7 +42,7 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
 +obj-$(CONFIG_SPI_XWAY)			+= spi-xway.o
 --- /dev/null
 +++ b/drivers/spi/spi-xway.c
-@@ -0,0 +1,989 @@
+@@ -0,0 +1,991 @@
 +/*
 + * Lantiq SoC SPI controller
 + *
@@ -750,6 +750,8 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
 +	/* Disable all interrupts */
 +	ltq_spi_reg_clearbit(hw, LTQ_SPI_IRNEN_ALL, LTQ_SPI_IRNEN);
 +
++	dev_err(hw->dev, "error %x\n", ltq_spi_reg_read(hw, LTQ_SPI_STAT));
++
 +	/* Clear all error flags */
 +	ltq_spi_reg_write(hw, LTQ_SPI_WHBSTATE_CLR_ERRORS, LTQ_SPI_WHBSTATE);
 +
-- 
2.6.1
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel