[OpenWrt-Devel] [PATCH 2/2] lantiq: get rid of ltq-vdsl-fw
Andre Heider
a.heider at gmail.com
Sun Nov 29 13:25:04 EST 2015
Because of dsl-vrx200-firmware-xdsl-* there's no need anymore to
download a dsl firmware at runtime.
Signed-off-by: Andre Heider <a.heider at gmail.com>
---
package/kernel/lantiq/ltq-vdsl-fw/Makefile | 40 --
package/kernel/lantiq/ltq-vdsl-fw/src/LzmaDecode.c | 584 ---------------------
package/kernel/lantiq/ltq-vdsl-fw/src/LzmaDecode.h | 113 ----
package/kernel/lantiq/ltq-vdsl-fw/src/LzmaTypes.h | 45 --
.../kernel/lantiq/ltq-vdsl-fw/src/LzmaWrapper.c | 206 --------
.../kernel/lantiq/ltq-vdsl-fw/src/LzmaWrapper.h | 36 --
package/kernel/lantiq/ltq-vdsl-fw/src/Makefile | 13 -
.../lantiq/ltq-vdsl-fw/src/vdsl_fw_install.sh | 57 --
.../lantiq/ltq-vdsl-fw/src/w921v_fw_cutter.c | 165 ------
target/linux/lantiq/xrx200/target.mk | 1 -
10 files changed, 1260 deletions(-)
delete mode 100644 package/kernel/lantiq/ltq-vdsl-fw/Makefile
delete mode 100644 package/kernel/lantiq/ltq-vdsl-fw/src/LzmaDecode.c
delete mode 100644 package/kernel/lantiq/ltq-vdsl-fw/src/LzmaDecode.h
delete mode 100644 package/kernel/lantiq/ltq-vdsl-fw/src/LzmaTypes.h
delete mode 100644 package/kernel/lantiq/ltq-vdsl-fw/src/LzmaWrapper.c
delete mode 100644 package/kernel/lantiq/ltq-vdsl-fw/src/LzmaWrapper.h
delete mode 100644 package/kernel/lantiq/ltq-vdsl-fw/src/Makefile
delete mode 100755 package/kernel/lantiq/ltq-vdsl-fw/src/vdsl_fw_install.sh
delete mode 100644 package/kernel/lantiq/ltq-vdsl-fw/src/w921v_fw_cutter.c
diff --git a/package/kernel/lantiq/ltq-vdsl-fw/Makefile b/package/kernel/lantiq/ltq-vdsl-fw/Makefile
deleted file mode 100644
index 6404067..0000000
--- a/package/kernel/lantiq/ltq-vdsl-fw/Makefile
+++ /dev/null
@@ -1,40 +0,0 @@
-# Copyright (C) 2012 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=ltq-vdsl-fw
-PKG_VERSION:=1
-PKG_RELEASE:=1
-
-PKG_MAINTAINER:=John Crispin <blogic at openwrt.org>
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/ltq-vdsl-vr9-fw-installer
- TITLE:=Firmware installer
- SECTION:=net
- CATEGORY:=Network
- DEPENDS:=@TARGET_lantiq_xrx200 +kmod-ltq-vdsl-vr9
-endef
-
-define Build/Prepare
- $(INSTALL_DIR) $(PKG_BUILD_DIR)
- $(CP) ./src/* $(PKG_BUILD_DIR)
-endef
-
-define Build/Compile
- $(TARGET_CONFIGURE_OPTS) \
- CFLAGS="$(TARGET_CFLAGS)" \
- LDFLAGS="$(TARGET_LDFLAGS)" \
- $(MAKE) -C $(PKG_BUILD_DIR)
-endef
-
-define Package/ltq-vdsl-vr9-fw-installer/install
- $(INSTALL_DIR) $(1)/sbin
- $(CP) $(PKG_BUILD_DIR)/w921v_fw_cutter $(PKG_BUILD_DIR)/vdsl_fw_install.sh $(1)/sbin/
-endef
-
-$(eval $(call BuildPackage,ltq-vdsl-vr9-fw-installer))
diff --git a/package/kernel/lantiq/ltq-vdsl-fw/src/LzmaDecode.c b/package/kernel/lantiq/ltq-vdsl-fw/src/LzmaDecode.c
deleted file mode 100644
index cb83453..0000000
--- a/package/kernel/lantiq/ltq-vdsl-fw/src/LzmaDecode.c
+++ /dev/null
@@ -1,584 +0,0 @@
-/*
- LzmaDecode.c
- LZMA Decoder (optimized for Speed version)
-
- LZMA SDK 4.40 Copyright (c) 1999-2006 Igor Pavlov (2006-05-01)
- http://www.7-zip.org/
-
- LZMA SDK is licensed under two licenses:
- 1) GNU Lesser General Public License (GNU LGPL)
- 2) Common Public License (CPL)
- It means that you can select one of these two licenses and
- follow rules of that license.
-
- SPECIAL EXCEPTION:
- Igor Pavlov, as the author of this Code, expressly permits you to
- statically or dynamically link your Code (or bind by name) to the
- interfaces of this file without subjecting your linked Code to the
- terms of the CPL or GNU LGPL. Any modifications or additions
- to this file, however, are subject to the LGPL or CPL terms.
-*/
-
-#include "LzmaDecode.h"
-
-#define kNumTopBits 24
-#define kTopValue ((UInt32)1 << kNumTopBits)
-
-#define kNumBitModelTotalBits 11
-#define kBitModelTotal (1 << kNumBitModelTotalBits)
-#define kNumMoveBits 5
-
-#define RC_READ_BYTE (*Buffer++)
-
-#define RC_INIT2 Code = 0; Range = 0xFFFFFFFF; \
- { int i; for(i = 0; i < 5; i++) { RC_TEST; Code = (Code << 8) | RC_READ_BYTE; }}
-
-#ifdef _LZMA_IN_CB
-
-#define RC_TEST { if (Buffer == BufferLim) \
- { SizeT size; int result = InCallback->Read(InCallback, &Buffer, &size); if (result != LZMA_RESULT_OK) return result; \
- BufferLim = Buffer + size; if (size == 0) return LZMA_RESULT_DATA_ERROR; }}
-
-#define RC_INIT Buffer = BufferLim = 0; RC_INIT2
-
-#else
-
-#define RC_TEST { if (Buffer == BufferLim) return LZMA_RESULT_DATA_ERROR; }
-
-#define RC_INIT(buffer, bufferSize) Buffer = buffer; BufferLim = buffer + bufferSize; RC_INIT2
-
-#endif
-
-#define RC_NORMALIZE if (Range < kTopValue) { RC_TEST; Range <<= 8; Code = (Code << 8) | RC_READ_BYTE; }
-
-#define IfBit0(p) RC_NORMALIZE; bound = (Range >> kNumBitModelTotalBits) * *(p); if (Code < bound)
-#define UpdateBit0(p) Range = bound; *(p) += (kBitModelTotal - *(p)) >> kNumMoveBits;
-#define UpdateBit1(p) Range -= bound; Code -= bound; *(p) -= (*(p)) >> kNumMoveBits;
-
-#define RC_GET_BIT2(p, mi, A0, A1) IfBit0(p) \
- { UpdateBit0(p); mi <<= 1; A0; } else \
- { UpdateBit1(p); mi = (mi + mi) + 1; A1; }
-
-#define RC_GET_BIT(p, mi) RC_GET_BIT2(p, mi, ; , ;)
-
-#define RangeDecoderBitTreeDecode(probs, numLevels, res) \
- { int i = numLevels; res = 1; \
- do { CProb *p = probs + res; RC_GET_BIT(p, res) } while(--i != 0); \
- res -= (1 << numLevels); }
-
-
-#define kNumPosBitsMax 4
-#define kNumPosStatesMax (1 << kNumPosBitsMax)
-
-#define kLenNumLowBits 3
-#define kLenNumLowSymbols (1 << kLenNumLowBits)
-#define kLenNumMidBits 3
-#define kLenNumMidSymbols (1 << kLenNumMidBits)
-#define kLenNumHighBits 8
-#define kLenNumHighSymbols (1 << kLenNumHighBits)
-
-#define LenChoice 0
-#define LenChoice2 (LenChoice + 1)
-#define LenLow (LenChoice2 + 1)
-#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits))
-#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits))
-#define kNumLenProbs (LenHigh + kLenNumHighSymbols)
-
-
-#define kNumStates 12
-#define kNumLitStates 7
-
-#define kStartPosModelIndex 4
-#define kEndPosModelIndex 14
-#define kNumFullDistances (1 << (kEndPosModelIndex >> 1))
-
-#define kNumPosSlotBits 6
-#define kNumLenToPosStates 4
-
-#define kNumAlignBits 4
-#define kAlignTableSize (1 << kNumAlignBits)
-
-#define kMatchMinLen 2
-
-#define IsMatch 0
-#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax))
-#define IsRepG0 (IsRep + kNumStates)
-#define IsRepG1 (IsRepG0 + kNumStates)
-#define IsRepG2 (IsRepG1 + kNumStates)
-#define IsRep0Long (IsRepG2 + kNumStates)
-#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax))
-#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits))
-#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex)
-#define LenCoder (Align + kAlignTableSize)
-#define RepLenCoder (LenCoder + kNumLenProbs)
-#define Literal (RepLenCoder + kNumLenProbs)
-
-#if Literal != LZMA_BASE_SIZE
-StopCompilingDueBUG
-#endif
-
-int LzmaDecodeProperties(CLzmaProperties *propsRes, const unsigned char *propsData, int size)
-{
- unsigned char prop0;
- if (size < LZMA_PROPERTIES_SIZE)
- return LZMA_RESULT_DATA_ERROR;
- prop0 = propsData[0];
- if (prop0 >= (9 * 5 * 5))
- return LZMA_RESULT_DATA_ERROR;
- {
- for (propsRes->pb = 0; prop0 >= (9 * 5); propsRes->pb++, prop0 -= (9 * 5));
- for (propsRes->lp = 0; prop0 >= 9; propsRes->lp++, prop0 -= 9);
- propsRes->lc = prop0;
- /*
- unsigned char remainder = (unsigned char)(prop0 / 9);
- propsRes->lc = prop0 % 9;
- propsRes->pb = remainder / 5;
- propsRes->lp = remainder % 5;
- */
- }
-
- #ifdef _LZMA_OUT_READ
- {
- int i;
- propsRes->DictionarySize = 0;
- for (i = 0; i < 4; i++)
- propsRes->DictionarySize += (UInt32)(propsData[1 + i]) << (i * 8);
- if (propsRes->DictionarySize == 0)
- propsRes->DictionarySize = 1;
- }
- #endif
- return LZMA_RESULT_OK;
-}
-
-#define kLzmaStreamWasFinishedId (-1)
-
-int LzmaDecode(CLzmaDecoderState *vs,
- #ifdef _LZMA_IN_CB
- ILzmaInCallback *InCallback,
- #else
- const unsigned char *inStream, SizeT inSize, SizeT *inSizeProcessed,
- #endif
- unsigned char *outStream, SizeT outSize, SizeT *outSizeProcessed)
-{
- CProb *p = vs->Probs;
- SizeT nowPos = 0;
- Byte previousByte = 0;
- UInt32 posStateMask = (1 << (vs->Properties.pb)) - 1;
- UInt32 literalPosMask = (1 << (vs->Properties.lp)) - 1;
- int lc = vs->Properties.lc;
-
- #ifdef _LZMA_OUT_READ
-
- UInt32 Range = vs->Range;
- UInt32 Code = vs->Code;
- #ifdef _LZMA_IN_CB
- const Byte *Buffer = vs->Buffer;
- const Byte *BufferLim = vs->BufferLim;
- #else
- const Byte *Buffer = inStream;
- const Byte *BufferLim = inStream + inSize;
- #endif
- int state = vs->State;
- UInt32 rep0 = vs->Reps[0], rep1 = vs->Reps[1], rep2 = vs->Reps[2], rep3 = vs->Reps[3];
- int len = vs->RemainLen;
- UInt32 globalPos = vs->GlobalPos;
- UInt32 distanceLimit = vs->DistanceLimit;
-
- Byte *dictionary = vs->Dictionary;
- UInt32 dictionarySize = vs->Properties.DictionarySize;
- UInt32 dictionaryPos = vs->DictionaryPos;
-
- Byte tempDictionary[4];
-
- #ifndef _LZMA_IN_CB
- *inSizeProcessed = 0;
- #endif
- *outSizeProcessed = 0;
- if (len == kLzmaStreamWasFinishedId)
- return LZMA_RESULT_OK;
-
- if (dictionarySize == 0)
- {
- dictionary = tempDictionary;
- dictionarySize = 1;
- tempDictionary[0] = vs->TempDictionary[0];
- }
-
- if (len == kLzmaNeedInitId)
- {
- {
- UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + vs->Properties.lp));
- UInt32 i;
- for (i = 0; i < numProbs; i++)
- p[i] = kBitModelTotal >> 1;
- rep0 = rep1 = rep2 = rep3 = 1;
- state = 0;
- globalPos = 0;
- distanceLimit = 0;
- dictionaryPos = 0;
- dictionary[dictionarySize - 1] = 0;
- #ifdef _LZMA_IN_CB
- RC_INIT;
- #else
- RC_INIT(inStream, inSize);
- #endif
- }
- len = 0;
- }
- while(len != 0 && nowPos < outSize)
- {
- UInt32 pos = dictionaryPos - rep0;
- if (pos >= dictionarySize)
- pos += dictionarySize;
- outStream[nowPos++] = dictionary[dictionaryPos] = dictionary[pos];
- if (++dictionaryPos == dictionarySize)
- dictionaryPos = 0;
- len--;
- }
- if (dictionaryPos == 0)
- previousByte = dictionary[dictionarySize - 1];
- else
- previousByte = dictionary[dictionaryPos - 1];
-
- #else /* if !_LZMA_OUT_READ */
-
- int state = 0;
- UInt32 rep0 = 1, rep1 = 1, rep2 = 1, rep3 = 1;
- int len = 0;
- const Byte *Buffer;
- const Byte *BufferLim;
- UInt32 Range;
- UInt32 Code;
-
- #ifndef _LZMA_IN_CB
- *inSizeProcessed = 0;
- #endif
- *outSizeProcessed = 0;
-
- {
- UInt32 i;
- UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + vs->Properties.lp));
- for (i = 0; i < numProbs; i++)
- p[i] = kBitModelTotal >> 1;
- }
-
- #ifdef _LZMA_IN_CB
- RC_INIT;
- #else
- RC_INIT(inStream, inSize);
- #endif
-
- #endif /* _LZMA_OUT_READ */
-
- while(nowPos < outSize)
- {
- CProb *prob;
- UInt32 bound;
- int posState = (int)(
- (nowPos
- #ifdef _LZMA_OUT_READ
- + globalPos
- #endif
- )
- & posStateMask);
-
- prob = p + IsMatch + (state << kNumPosBitsMax) + posState;
- IfBit0(prob)
- {
- int symbol = 1;
- UpdateBit0(prob)
- prob = p + Literal + (LZMA_LIT_SIZE *
- (((
- (nowPos
- #ifdef _LZMA_OUT_READ
- + globalPos
- #endif
- )
- & literalPosMask) << lc) + (previousByte >> (8 - lc))));
-
- if (state >= kNumLitStates)
- {
- int matchByte;
- #ifdef _LZMA_OUT_READ
- UInt32 pos = dictionaryPos - rep0;
- if (pos >= dictionarySize)
- pos += dictionarySize;
- matchByte = dictionary[pos];
- #else
- matchByte = outStream[nowPos - rep0];
- #endif
- do
- {
- int bit;
- CProb *probLit;
- matchByte <<= 1;
- bit = (matchByte & 0x100);
- probLit = prob + 0x100 + bit + symbol;
- RC_GET_BIT2(probLit, symbol, if (bit != 0) break, if (bit == 0) break)
- }
- while (symbol < 0x100);
- }
- while (symbol < 0x100)
- {
- CProb *probLit = prob + symbol;
- RC_GET_BIT(probLit, symbol)
- }
- previousByte = (Byte)symbol;
-
- outStream[nowPos++] = previousByte;
- #ifdef _LZMA_OUT_READ
- if (distanceLimit < dictionarySize)
- distanceLimit++;
-
- dictionary[dictionaryPos] = previousByte;
- if (++dictionaryPos == dictionarySize)
- dictionaryPos = 0;
- #endif
- if (state < 4) state = 0;
- else if (state < 10) state -= 3;
- else state -= 6;
- }
- else
- {
- UpdateBit1(prob);
- prob = p + IsRep + state;
- IfBit0(prob)
- {
- UpdateBit0(prob);
- rep3 = rep2;
- rep2 = rep1;
- rep1 = rep0;
- state = state < kNumLitStates ? 0 : 3;
- prob = p + LenCoder;
- }
- else
- {
- UpdateBit1(prob);
- prob = p + IsRepG0 + state;
- IfBit0(prob)
- {
- UpdateBit0(prob);
- prob = p + IsRep0Long + (state << kNumPosBitsMax) + posState;
- IfBit0(prob)
- {
- #ifdef _LZMA_OUT_READ
- UInt32 pos;
- #endif
- UpdateBit0(prob);
-
- #ifdef _LZMA_OUT_READ
- if (distanceLimit == 0)
- #else
- if (nowPos == 0)
- #endif
- return LZMA_RESULT_DATA_ERROR;
-
- state = state < kNumLitStates ? 9 : 11;
- #ifdef _LZMA_OUT_READ
- pos = dictionaryPos - rep0;
- if (pos >= dictionarySize)
- pos += dictionarySize;
- previousByte = dictionary[pos];
- dictionary[dictionaryPos] = previousByte;
- if (++dictionaryPos == dictionarySize)
- dictionaryPos = 0;
- #else
- previousByte = outStream[nowPos - rep0];
- #endif
- outStream[nowPos++] = previousByte;
- #ifdef _LZMA_OUT_READ
- if (distanceLimit < dictionarySize)
- distanceLimit++;
- #endif
-
- continue;
- }
- else
- {
- UpdateBit1(prob);
- }
- }
- else
- {
- UInt32 distance;
- UpdateBit1(prob);
- prob = p + IsRepG1 + state;
- IfBit0(prob)
- {
- UpdateBit0(prob);
- distance = rep1;
- }
- else
- {
- UpdateBit1(prob);
- prob = p + IsRepG2 + state;
- IfBit0(prob)
- {
- UpdateBit0(prob);
- distance = rep2;
- }
- else
- {
- UpdateBit1(prob);
- distance = rep3;
- rep3 = rep2;
- }
- rep2 = rep1;
- }
- rep1 = rep0;
- rep0 = distance;
- }
- state = state < kNumLitStates ? 8 : 11;
- prob = p + RepLenCoder;
- }
- {
- int numBits, offset;
- CProb *probLen = prob + LenChoice;
- IfBit0(probLen)
- {
- UpdateBit0(probLen);
- probLen = prob + LenLow + (posState << kLenNumLowBits);
- offset = 0;
- numBits = kLenNumLowBits;
- }
- else
- {
- UpdateBit1(probLen);
- probLen = prob + LenChoice2;
- IfBit0(probLen)
- {
- UpdateBit0(probLen);
- probLen = prob + LenMid + (posState << kLenNumMidBits);
- offset = kLenNumLowSymbols;
- numBits = kLenNumMidBits;
- }
- else
- {
- UpdateBit1(probLen);
- probLen = prob + LenHigh;
- offset = kLenNumLowSymbols + kLenNumMidSymbols;
- numBits = kLenNumHighBits;
- }
- }
- RangeDecoderBitTreeDecode(probLen, numBits, len);
- len += offset;
- }
-
- if (state < 4)
- {
- int posSlot;
- state += kNumLitStates;
- prob = p + PosSlot +
- ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) <<
- kNumPosSlotBits);
- RangeDecoderBitTreeDecode(prob, kNumPosSlotBits, posSlot);
- if (posSlot >= kStartPosModelIndex)
- {
- int numDirectBits = ((posSlot >> 1) - 1);
- rep0 = (2 | ((UInt32)posSlot & 1));
- if (posSlot < kEndPosModelIndex)
- {
- rep0 <<= numDirectBits;
- prob = p + SpecPos + rep0 - posSlot - 1;
- }
- else
- {
- numDirectBits -= kNumAlignBits;
- do
- {
- RC_NORMALIZE
- Range >>= 1;
- rep0 <<= 1;
- if (Code >= Range)
- {
- Code -= Range;
- rep0 |= 1;
- }
- }
- while (--numDirectBits != 0);
- prob = p + Align;
- rep0 <<= kNumAlignBits;
- numDirectBits = kNumAlignBits;
- }
- {
- int i = 1;
- int mi = 1;
- do
- {
- CProb *prob3 = prob + mi;
- RC_GET_BIT2(prob3, mi, ; , rep0 |= i);
- i <<= 1;
- }
- while(--numDirectBits != 0);
- }
- }
- else
- rep0 = posSlot;
- if (++rep0 == (UInt32)(0))
- {
- /* it's for stream version */
- len = kLzmaStreamWasFinishedId;
- break;
- }
- }
-
- len += kMatchMinLen;
- #ifdef _LZMA_OUT_READ
- if (rep0 > distanceLimit)
- #else
- if (rep0 > nowPos)
- #endif
- return LZMA_RESULT_DATA_ERROR;
-
- #ifdef _LZMA_OUT_READ
- if (dictionarySize - distanceLimit > (UInt32)len)
- distanceLimit += len;
- else
- distanceLimit = dictionarySize;
- #endif
-
- do
- {
- #ifdef _LZMA_OUT_READ
- UInt32 pos = dictionaryPos - rep0;
- if (pos >= dictionarySize)
- pos += dictionarySize;
- previousByte = dictionary[pos];
- dictionary[dictionaryPos] = previousByte;
- if (++dictionaryPos == dictionarySize)
- dictionaryPos = 0;
- #else
- previousByte = outStream[nowPos - rep0];
- #endif
- len--;
- outStream[nowPos++] = previousByte;
- }
- while(len != 0 && nowPos < outSize);
- }
- }
- RC_NORMALIZE;
-
- #ifdef _LZMA_OUT_READ
- vs->Range = Range;
- vs->Code = Code;
- vs->DictionaryPos = dictionaryPos;
- vs->GlobalPos = globalPos + (UInt32)nowPos;
- vs->DistanceLimit = distanceLimit;
- vs->Reps[0] = rep0;
- vs->Reps[1] = rep1;
- vs->Reps[2] = rep2;
- vs->Reps[3] = rep3;
- vs->State = state;
- vs->RemainLen = len;
- vs->TempDictionary[0] = tempDictionary[0];
- #endif
-
- #ifdef _LZMA_IN_CB
- vs->Buffer = Buffer;
- vs->BufferLim = BufferLim;
- #else
- *inSizeProcessed = (SizeT)(Buffer - inStream);
- #endif
- *outSizeProcessed = nowPos;
- return LZMA_RESULT_OK;
-}
diff --git a/package/kernel/lantiq/ltq-vdsl-fw/src/LzmaDecode.h b/package/kernel/lantiq/ltq-vdsl-fw/src/LzmaDecode.h
deleted file mode 100644
index 2870eeb..0000000
--- a/package/kernel/lantiq/ltq-vdsl-fw/src/LzmaDecode.h
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- LzmaDecode.h
- LZMA Decoder interface
-
- LZMA SDK 4.40 Copyright (c) 1999-2006 Igor Pavlov (2006-05-01)
- http://www.7-zip.org/
-
- LZMA SDK is licensed under two licenses:
- 1) GNU Lesser General Public License (GNU LGPL)
- 2) Common Public License (CPL)
- It means that you can select one of these two licenses and
- follow rules of that license.
-
- SPECIAL EXCEPTION:
- Igor Pavlov, as the author of this code, expressly permits you to
- statically or dynamically link your code (or bind by name) to the
- interfaces of this file without subjecting your linked code to the
- terms of the CPL or GNU LGPL. Any modifications or additions
- to this file, however, are subject to the LGPL or CPL terms.
-*/
-
-#ifndef __LZMADECODE_H
-#define __LZMADECODE_H
-
-#include "LzmaTypes.h"
-
-/* #define _LZMA_IN_CB */
-/* Use callback for input data */
-
-/* #define _LZMA_OUT_READ */
-/* Use read function for output data */
-
-/* #define _LZMA_PROB32 */
-/* It can increase speed on some 32-bit CPUs,
- but memory usage will be doubled in that case */
-
-/* #define _LZMA_LOC_OPT */
-/* Enable local speed optimizations inside code */
-
-#ifdef _LZMA_PROB32
-#define CProb UInt32
-#else
-#define CProb UInt16
-#endif
-
-#define LZMA_RESULT_OK 0
-#define LZMA_RESULT_DATA_ERROR 1
-
-#ifdef _LZMA_IN_CB
-typedef struct _ILzmaInCallback
-{
- int (*Read)(void *object, const unsigned char **buffer, SizeT *bufferSize);
-} ILzmaInCallback;
-#endif
-
-#define LZMA_BASE_SIZE 1846
-#define LZMA_LIT_SIZE 768
-
-#define LZMA_PROPERTIES_SIZE 5
-
-typedef struct _CLzmaProperties
-{
- int lc;
- int lp;
- int pb;
- #ifdef _LZMA_OUT_READ
- UInt32 DictionarySize;
- #endif
-}CLzmaProperties;
-
-int LzmaDecodeProperties(CLzmaProperties *propsRes, const unsigned char *propsData, int size);
-
-#define LzmaGetNumProbs(Properties) (LZMA_BASE_SIZE + (LZMA_LIT_SIZE << ((Properties)->lc + (Properties)->lp)))
-
-#define kLzmaNeedInitId (-2)
-
-typedef struct _CLzmaDecoderState
-{
- CLzmaProperties Properties;
- CProb *Probs;
-
- #ifdef _LZMA_IN_CB
- const unsigned char *Buffer;
- const unsigned char *BufferLim;
- #endif
-
- #ifdef _LZMA_OUT_READ
- unsigned char *Dictionary;
- UInt32 Range;
- UInt32 Code;
- UInt32 DictionaryPos;
- UInt32 GlobalPos;
- UInt32 DistanceLimit;
- UInt32 Reps[4];
- int State;
- int RemainLen;
- unsigned char TempDictionary[4];
- #endif
-} CLzmaDecoderState;
-
-#ifdef _LZMA_OUT_READ
-#define LzmaDecoderInit(vs) { (vs)->RemainLen = kLzmaNeedInitId; }
-#endif
-
-int LzmaDecode(CLzmaDecoderState *vs,
- #ifdef _LZMA_IN_CB
- ILzmaInCallback *inCallback,
- #else
- const unsigned char *inStream, SizeT inSize, SizeT *inSizeProcessed,
- #endif
- unsigned char *outStream, SizeT outSize, SizeT *outSizeProcessed);
-
-#endif
diff --git a/package/kernel/lantiq/ltq-vdsl-fw/src/LzmaTypes.h b/package/kernel/lantiq/ltq-vdsl-fw/src/LzmaTypes.h
deleted file mode 100644
index 9c27290..0000000
--- a/package/kernel/lantiq/ltq-vdsl-fw/src/LzmaTypes.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
-LzmaTypes.h
-
-Types for LZMA Decoder
-
-This file written and distributed to public domain by Igor Pavlov.
-This file is part of LZMA SDK 4.40 (2006-05-01)
-*/
-
-#ifndef __LZMATYPES_H
-#define __LZMATYPES_H
-
-#ifndef _7ZIP_BYTE_DEFINED
-#define _7ZIP_BYTE_DEFINED
-typedef unsigned char Byte;
-#endif
-
-#ifndef _7ZIP_UINT16_DEFINED
-#define _7ZIP_UINT16_DEFINED
-typedef unsigned short UInt16;
-#endif
-
-#ifndef _7ZIP_UINT32_DEFINED
-#define _7ZIP_UINT32_DEFINED
-#ifdef _LZMA_UINT32_IS_ULONG
-typedef unsigned long UInt32;
-#else
-typedef unsigned int UInt32;
-#endif
-#endif
-
-/* #define _LZMA_NO_SYSTEM_SIZE_T */
-/* You can use it, if you don't want <stddef.h> */
-
-#ifndef _7ZIP_SIZET_DEFINED
-#define _7ZIP_SIZET_DEFINED
-#ifdef _LZMA_NO_SYSTEM_SIZE_T
-typedef UInt32 SizeT;
-#else
-#include <stddef.h>
-typedef size_t SizeT;
-#endif
-#endif
-
-#endif
diff --git a/package/kernel/lantiq/ltq-vdsl-fw/src/LzmaWrapper.c b/package/kernel/lantiq/ltq-vdsl-fw/src/LzmaWrapper.c
deleted file mode 100644
index 7dce056..0000000
--- a/package/kernel/lantiq/ltq-vdsl-fw/src/LzmaWrapper.c
+++ /dev/null
@@ -1,206 +0,0 @@
-/******************************************************************************
-**
-** FILE NAME : LzmaWrapper.c
-** PROJECT : bootloader
-** MODULES : U-boot
-**
-** DATE : 2 Nov 2006
-** AUTHOR : Lin Mars
-** DESCRIPTION : LZMA decoder support for U-boot 1.1.5
-** COPYRIGHT : Copyright (c) 2006
-** Infineon Technologies AG
-** Am Campeon 1-12, 85579 Neubiberg, Germany
-**
-** This program is free software; you can redistribute it and/or modify
-** it under the terms of the GNU General Public License as published by
-** the Free Software Foundation; either version 2 of the License, or
-** (at your option) any later version.
-**
-** HISTORY
-** $Date $Author $Comment
-** 2 Nov 2006 Lin Mars init version which derived from LzmaTest.c from
-** LZMA v4.43 SDK
-** 24 May 2007 Lin Mars Fix issue for multiple lzma_inflate involved
-*******************************************************************************/
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-
-#include "LzmaDecode.h"
-#include "LzmaWrapper.h"
-
-#if defined(DEBUG_ENABLE_BOOTSTRAP_PRINTF) || !defined(CFG_BOOTSTRAP_CODE)
-static const char *kCantReadMessage = "Can not read from source buffer";
-static const char *kCantAllocateMessage = "Not enough buffer for decompression";
-#endif
-
-static size_t rpos=0, dpos=0;
-
-static int MyReadFileAndCheck(unsigned char *src, void *dest, size_t size)
-{
- if (size == 0)
- return 0;
- memcpy(dest, src + rpos, size);
- rpos += size;
- return 1;
-}
-
-int lzma_inflate(unsigned char *source, int s_len, unsigned char *dest, int *d_len)
-{
- /* We use two 32-bit integers to construct 64-bit integer for file size.
- You can remove outSizeHigh, if you don't need >= 4GB supporting,
- or you can use UInt64 outSize, if your compiler supports 64-bit integers*/
- UInt32 outSize = 0;
- UInt32 outSizeHigh = 0;
- SizeT outSizeFull;
- unsigned char *outStream;
-
- int waitEOS = 1;
- /* waitEOS = 1, if there is no uncompressed size in headers,
- so decoder will wait EOS (End of Stream Marker) in compressed stream */
-
- SizeT compressedSize;
- unsigned char *inStream;
-
- CLzmaDecoderState state; /* it's about 24-80 bytes structure, if int is 32-bit */
- unsigned char properties[LZMA_PROPERTIES_SIZE];
-
- int res;
-
- rpos=0; dpos=0;
-
- if (sizeof(UInt32) < 4)
- {
-#if defined(DEBUG_ENABLE_BOOTSTRAP_PRINTF) || !defined(CFG_BOOTSTRAP_CODE)
- printf("LZMA decoder needs correct UInt32\n");
-#endif
- return LZMA_RESULT_DATA_ERROR;
- }
-
- {
- long length=s_len;
- if ((long)(SizeT)length != length)
- {
-#if defined(DEBUG_ENABLE_BOOTSTRAP_PRINTF) || !defined(CFG_BOOTSTRAP_CODE)
- printf("Too big compressed stream\n");
-#endif
- return LZMA_RESULT_DATA_ERROR;
- }
- compressedSize = (SizeT)(length - (LZMA_PROPERTIES_SIZE + 8));
- }
-
- /* Read LZMA properties for compressed stream */
-
- if (!MyReadFileAndCheck(source, properties, sizeof(properties)))
- {
-#if defined(DEBUG_ENABLE_BOOTSTRAP_PRINTF) || !defined(CFG_BOOTSTRAP_CODE)
- printf("%s\n", kCantReadMessage);
-#endif
- return LZMA_RESULT_DATA_ERROR;
- }
-
- /* Read uncompressed size */
- {
- int i;
- for (i = 0; i < 8; i++)
- {
- unsigned char b;
- if (!MyReadFileAndCheck(source, &b, 1))
- {
-#if defined(DEBUG_ENABLE_BOOTSTRAP_PRINTF) || !defined(CFG_BOOTSTRAP_CODE)
- printf("%s\n", kCantReadMessage);
-#endif
- return LZMA_RESULT_DATA_ERROR;
- }
- if (b != 0xFF)
- waitEOS = 0;
- if (i < 4)
- outSize += (UInt32)(b) << (i * 8);
- else
- outSizeHigh += (UInt32)(b) << ((i - 4) * 8);
- }
-
- if (waitEOS)
- {
-#if defined(DEBUG_ENABLE_BOOTSTRAP_PRINTF) || !defined(CFG_BOOTSTRAP_CODE)
- printf("Stream with EOS marker is not supported");
-#endif
- return LZMA_RESULT_DATA_ERROR;
- }
- outSizeFull = (SizeT)outSize;
- if (sizeof(SizeT) >= 8)
- outSizeFull |= (((SizeT)outSizeHigh << 16) << 16);
- else if (outSizeHigh != 0 || (UInt32)(SizeT)outSize != outSize)
- {
-#if defined(DEBUG_ENABLE_BOOTSTRAP_PRINTF) || !defined(CFG_BOOTSTRAP_CODE)
- printf("Too big uncompressed stream");
-#endif
- return LZMA_RESULT_DATA_ERROR;
- }
- }
-
- /* Decode LZMA properties and allocate memory */
- if (LzmaDecodeProperties(&state.Properties, properties, LZMA_PROPERTIES_SIZE) != LZMA_RESULT_OK)
- {
-#if defined(DEBUG_ENABLE_BOOTSTRAP_PRINTF) || !defined(CFG_BOOTSTRAP_CODE)
- printf("Incorrect stream properties");
-#endif
- return LZMA_RESULT_DATA_ERROR;
- }
- state.Probs = (CProb *)malloc(LzmaGetNumProbs(&state.Properties) * sizeof(CProb));
-
- if (outSizeFull == 0)
- outStream = 0;
- else
- {
- if (outSizeFull > d_len)
- outStream = 0;
- else
- outStream = dest;
- }
-
- if (compressedSize == 0)
- inStream = 0;
- else
- {
- if ((compressedSize+rpos) > s_len )
- inStream = 0;
- else
- inStream = source + rpos;
- }
-
- if (state.Probs == 0
- || (outStream == 0 && outSizeFull != 0)
- || (inStream == 0 && compressedSize != 0)
- )
- {
- free(state.Probs);
-#if defined(DEBUG_ENABLE_BOOTSTRAP_PRINTF) || !defined(CFG_BOOTSTRAP_CODE)
- printf("%s\n", kCantAllocateMessage);
-#endif
- return LZMA_RESULT_DATA_ERROR;
- }
-
- /* Decompress */
- {
- SizeT inProcessed;
- SizeT outProcessed;
- res = LzmaDecode(&state,
- inStream, compressedSize, &inProcessed,
- outStream, outSizeFull, &outProcessed);
- if (res != 0)
- {
-#if defined(DEBUG_ENABLE_BOOTSTRAP_PRINTF) || !defined(CFG_BOOTSTRAP_CODE)
- printf("\nDecoding error = %d\n", res);
-#endif
- res = 1;
- }
- else
- {
- *d_len = outProcessed;
- }
- }
-
- free(state.Probs);
- return res;
-}
diff --git a/package/kernel/lantiq/ltq-vdsl-fw/src/LzmaWrapper.h b/package/kernel/lantiq/ltq-vdsl-fw/src/LzmaWrapper.h
deleted file mode 100644
index 2f9a3ff..0000000
--- a/package/kernel/lantiq/ltq-vdsl-fw/src/LzmaWrapper.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/******************************************************************************
-**
-** FILE NAME : LzmaWrapper.h
-** PROJECT : bootloader
-** MODULES : U-boot
-**
-** DATE : 2 Nov 2006
-** AUTHOR : Lin Mars
-** DESCRIPTION : LZMA decoder support for U-boot 1.1.5
-** COPYRIGHT : Copyright (c) 2006
-** Infineon Technologies AG
-** Am Campeon 1-12, 85579 Neubiberg, Germany
-**
-** This program is free software; you can redistribute it and/or modify
-** it under the terms of the GNU General Public License as published by
-** the Free Software Foundation; either version 2 of the License, or
-** (at your option) any later version.
-**
-** HISTORY
-** $Date $Author $Comment
-** 2 Nov 2006 Lin Mars init version which derived from LzmaTest.c from
-** LZMA v4.43 SDK
-*******************************************************************************/
-#ifndef __LZMA_WRAPPER_H__
-#define __LZMA_WRAPPER_H__
-
-#ifndef LZMA_RESULT_OK
-#define LZMA_RESULT_OK 0
-#endif
-#ifndef LZMA_RESULT_DATA_ERROR
-#define LZMA_RESULT_DATA_ERROR 1
-#endif
-
-extern int lzma_inflate(unsigned char *source, int s_len, unsigned char *dest, int *d_len);
-
-#endif /*__LZMA_WRAPPER_H__*/
diff --git a/package/kernel/lantiq/ltq-vdsl-fw/src/Makefile b/package/kernel/lantiq/ltq-vdsl-fw/src/Makefile
deleted file mode 100644
index 2d50aaf..0000000
--- a/package/kernel/lantiq/ltq-vdsl-fw/src/Makefile
+++ /dev/null
@@ -1,13 +0,0 @@
-PROG=w921v_fw_cutter
-OBJS=w921v_fw_cutter.c LzmaDecode.c LzmaWrapper.c
-
-all: $(PROG)
-
-$(PROG): $(OBJS)
- $(CC) $(CFLAGS) $(LDFLAGS) $^ -o $@
-
-clean:
- rm *.o $(PROG)
-
-%.o: %.c
- $(CC) $(CFLAGS) -c $^ -o $@
diff --git a/package/kernel/lantiq/ltq-vdsl-fw/src/vdsl_fw_install.sh b/package/kernel/lantiq/ltq-vdsl-fw/src/vdsl_fw_install.sh
deleted file mode 100755
index 4572abc..0000000
--- a/package/kernel/lantiq/ltq-vdsl-fw/src/vdsl_fw_install.sh
+++ /dev/null
@@ -1,57 +0,0 @@
-#!/bin/sh
-. /lib/functions.sh
-
-FW="/tmp/Firmware_Speedport_W921V_1.21.000.bin"
-URL="http://hilfe.telekom.de/dlp/eki/downloads/Speedport/Speedport%20W%20921V/Firmware_Speedport_W921V_1.21.000.bin"
-FW_TAPI="vr9_tapi_fw.bin"
-FW_DSL="vr9_dsl_fw_annex_b.bin"
-MD5_FW="0a099d08dbf091c74d685b532cbb1390"
-MD5_TAPI="06b6ab3481b8d3eb7e8bf6131f7f6b7f"
-MD5_DSL="59dd9dc81195c6854433c691b163f757"
-
-[ -f /lib/firmware/vdsl.bin ] && exit 0
-
-[ -z "$1" ] || URL=$1
-
-[ -f "${FW}" ] || {
- echo "${FW} does not exist. Try to Download it ? (y/N)"
- read -n 1 R
- echo ""
- [ "$R" = "y" ] || {
- echo "Please manually download the firmware from ${URL} and copy the file to ${FW}"
- exit 1
- }
- echo "Download w921v Firmware"
- wget "${URL}" -O "${FW}"
- [ $? -eq 0 -a -f "${FW}" ] || exit 1
-}
-
-F=`md5sum -b ${FW} | cut -d" " -f1`
-[ "$F" = "${MD5_FW}" ] || {
- echo "Failed to verify Firmware MD5"
- exit 1
-}
-
-cd /tmp
-echo "Unpack and decompress w921v Firmware"
-
-w921v_fw_cutter
-[ $? -eq 0 ] || exit 1
-
-T=`md5sum -b ${FW_TAPI} | cut -d" " -f1`
-D=`md5sum -b ${FW_DSL} | cut -d" " -f1`
-
-[ "$T" = "${MD5_TAPI}" -a "$D" = "${MD5_DSL}" ] || {
- echo "Failed to verify MD5"
- exit 1
-}
-
-MTD=$(find_mtd_index dsl_fw)
-if [ "$MTD" -gt 0 -a -e "/dev/mtd$MTD" ]; then
- echo "Storing firmware in flash"
- tar cvz ${FW_TAPI} ${FW_DSL} | mtd write - "/dev/mtd$MTD"
- /etc/init.d/dsl_fs boot
-else
- cp ${FW_TAPI} ${FW_DSL} /lib/firmware/
- ln -s /lib/firmware/vr9_dsl_fw_annex_b.bin /lib/firmware/vdsl.bin
-fi
diff --git a/package/kernel/lantiq/ltq-vdsl-fw/src/w921v_fw_cutter.c b/package/kernel/lantiq/ltq-vdsl-fw/src/w921v_fw_cutter.c
deleted file mode 100644
index fcd0106..0000000
--- a/package/kernel/lantiq/ltq-vdsl-fw/src/w921v_fw_cutter.c
+++ /dev/null
@@ -1,165 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
- *
- * Copyright (C) 2012 John Crispin <blogic at openwrt.org>
- */
-
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <unistd.h>
-#include <stdlib.h>
-#include <stdio.h>
-#include <string.h>
-#include <errno.h>
-#include <fcntl.h>
-
-#include "LzmaWrapper.h"
-
-#define FW_NAME "/tmp/Firmware_Speedport_W921V_1.21.000.bin"
-
-#define MAGIC 0x50
-#define MAGIC_SZ 0x3FFC00
-#if __BYTE_ORDER == __LITTLE_ENDIAN
-#define MAGIC_PART 0x12345678
-#define MAGIC_LZMA 0x8000005D
-#define MAGIC_ANNEX_B 0x3C
-#define MAGIC_TAPI 0x5A
-#else
-#define MAGIC_PART 0x78563412
-#define MAGIC_LZMA 0x5D000080
-#define MAGIC_ANNEX_B 0x3C000000
-#define MAGIC_TAPI 0x5A000000
-#endif
-
-
-const char* part_type(unsigned int id)
-{
- switch(id) {
- case MAGIC_ANNEX_B:
- return "/tmp/vr9_dsl_fw_annex_b.bin";
- case MAGIC_TAPI:
- return "/tmp/vr9_tapi_fw.bin";
- }
- printf("\tUnknown lzma type 0x%02X\n", id);
- return "/tmp/unknown.lzma";
-}
-
-int main(int argc, char **argv)
-{
- struct stat s;
- unsigned char *buf_orig;
- unsigned int *buf;
- int buflen;
- int fd;
- int i;
- int err;
- int start = 0, end = 0;
-
- printf("Arcadyan Firmware cutter v0.1\n");
- printf("-----------------------------\n");
- printf("This tool extracts the different parts of an arcadyan firmware update file\n");
- printf("This tool is for private use only. The Firmware that gets extracted has a license that forbids redistribution\n");
- printf("Please only run this if you understand the risks\n\n");
- printf("I understand the risks ? (y/N)\n");
-
- if (getchar() != 'y')
- return -1;
-
- if (stat(FW_NAME, &s) != 0) {
- printf("Failed to find %s\n", FW_NAME);
- printf("Ask Google or try http://hilfe.telekom.de/dlp/eki/downloads/Speedport/Speedport%20W%20921V/Firmware_Speedport_W921V_1.21.000.bin\n");
- return -1;
- }
-
- buf_orig = malloc(s.st_size);
- buf = malloc(s.st_size);
- if (!buf_orig || !buf) {
- printf("Failed to alloc %d bytes\n", s.st_size);
- return -1;
- }
-
- fd = open(FW_NAME, O_RDONLY);
- if (fd < 0) {
- printf("Unable to open %s\n", FW_NAME);
- return -1;
- }
-
-
- buflen = read(fd, buf_orig, s.st_size);
- close(fd);
- if (buflen != s.st_size) {
- printf("Loaded %d instead of %d bytes inside %s\n", buflen, s.st_size, FW_NAME);
- return -1;
- }
-
- /* <magic> */
- buf_orig++;
- buflen -= 1;
- for (i = 0; i < MAGIC_SZ; i++) {
- if ((i % 16) < 3)
- buf_orig[i] = buf_orig[i + 16] ^ MAGIC;
- else
- buf_orig[i] = buf_orig[i] ^ MAGIC;
- }
- buflen -= 3;
- memmove(&buf_orig[MAGIC_SZ], &buf_orig[MAGIC_SZ + 3], buflen - MAGIC_SZ);
- memcpy(buf, buf_orig, s.st_size);
-
- /* </magic> */
- do {
- if (buf[end] == MAGIC_PART) {
- end += 2;
- printf("Found partition at 0x%08X with size %d\n",
- start * sizeof(unsigned int),
- (end - start) * sizeof(unsigned int));
- if (buf[start] == MAGIC_LZMA) {
- int dest_len = 1024 * 1024;
- int len = buf[end - 3];
- unsigned int id = buf[end - 6];
- const char *type = part_type(id);
- unsigned char *dest;
-
- dest = malloc(dest_len);
- if (!dest) {
- printf("Failed to alloc dest buffer\n");
- return -1;
- }
-
- if (lzma_inflate((unsigned char*)&buf[start], len, dest, &dest_len)) {
- printf("Failed to decompress data\n");
- return -1;
- }
-
- fd = creat(type, S_IRUSR | S_IWUSR);
- if (fd != -1) {
- if (write(fd, dest, dest_len) != dest_len)
- printf("\tFailed to write %d bytes\n", dest_len);
- else
- printf("\tWrote %d bytes to %s\n", dest_len, type);
- close(fd);
- } else {
- printf("\tFailed to open %s\n", type);
- }
- free(dest);
- } else {
- printf("\tThis is not lzma\n");
- }
- start = end;
- } else {
- end++;
- }
- } while(end < buflen / sizeof(unsigned int));
-
- return 0;
-}
diff --git a/target/linux/lantiq/xrx200/target.mk b/target/linux/lantiq/xrx200/target.mk
index a235015..a24f0c1 100644
--- a/target/linux/lantiq/xrx200/target.mk
+++ b/target/linux/lantiq/xrx200/target.mk
@@ -7,7 +7,6 @@ CPU_SUBTYPE:=dsp
DEFAULT_PACKAGES+=kmod-leds-gpio \
kmod-gpio-button-hotplug \
- ltq-vdsl-vr9-fw-installer \
kmod-ltq-vdsl-vr9-mei \
kmod-ltq-vdsl-vr9 \
kmod-ltq-atm-vr9 \
--
2.6.2
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list