[OpenWrt-Devel] [PATCH] ramips:Allow funcs in multiple groups in pinctrl-rt2880.c for UARTF pin sharing
John Crispin
blogic at openwrt.org
Sat Nov 21 15:32:02 EST 2015
Hi,
i had a closer look at the code. what you want to do instead of adding 2
dummy muxes is to modify
static int rt2880_pmx_group_enable(struct pinctrl_dev *pctrldev,
and change this part
/* mark the pins as gpio */
for (i = 0; i < p->groups[group].func[0].pin_count; i++)
p->gpio[p->groups[group].func[0].pins[i]] = 1;
to not use [0] but the real mux which will enable the upper 4 gpio for
gpio usage.
John
On 03/11/2015 13:26, Noble Pepper wrote:
>
> Signed-off-by: Noble Pepper <openwrtmail at noblepepper.com>
> ---
> Existing pinctrl-rt2880.c code only kept track of one pin group that
> functions other than gpio may use. Functions in rt305x.c had differing
> numbers of pins which caused rt2880_get_group_pins() to sometimes return
> incorrect pins. Example: when trying to use "gpio uartf" function pins
> 7-14 instead of 7-10 may be claimed for uartf preventing using gpio on
> pins 11-14. Usage of groups and functions added to rt305x.c is shown in
> VOCORE.dtsi.
>
>
>> target/linux/ramips/dts/VOCORE.dtsi | 40 ++++-----
>> ...ralink-allow-functions-on-multiple-groups.patch | 98 ++++++++++++++++++++++
>> 2 files changed, 119 insertions(+), 19 deletions(-)
>> create mode 100644 target/linux/ramips/patches-3.18/0031-pinctrl-ralink-allow-functions-on-multiple-groups.patch
>>
>> diff --git a/target/linux/ramips/dts/VOCORE.dtsi b/target/linux/ramips/dts/VOCORE.dtsi
>> index ff031fa..a5a213f 100644
>> --- a/target/linux/ramips/dts/VOCORE.dtsi
>> +++ b/target/linux/ramips/dts/VOCORE.dtsi
>> @@ -1,3 +1,10 @@
>> +/ {
>> + palmbus at 10000000 {
>> + uartlite at c00 {
>> + status = "okay";
>> + };
>> + };
>> +};
>> /include/ "rt5350.dtsi"
>>
>> / {
>> @@ -5,6 +12,9 @@
>> model = "VoCore";
>>
>> palmbus at 10000000 {
>> + uart at 500 {
>> + status = "okay";
>> + };
>> gpio1: gpio at 660 {
>> status = "okay";
>> };
>> @@ -25,9 +35,15 @@
>> };
>>
>> pinctrl {
>> + uartf_pins: uartf {
>> + uartf {
>> + ralink,group = "uartf_low";
>> + ralink,function = "gpio uartf";
>> + };
>> + };
>> state_default: pinctrl0 {
>> gpio {
>> - ralink,group = "jtag", "uartf", "led";
>> + ralink,group = "jtag", "led", "uartf_high";
>> ralink,function = "gpio";
>> };
>> };
>> @@ -64,25 +80,11 @@
>> };
>>
>> /* UARTF */
>> - gpio7 {
>> - /* UARTF_RTS_N */
>> - gpio-export,name = "gpio7";
>> + gpio11 {
>> + /* uartf_dtr_n */
>> + gpio-export,name = "gpio11";
>> gpio-export,direction_may_change = <1>;
>> - gpios = <&gpio0 7 0>;
>> - };
>> -
>> - gpio8 {
>> - /* UARTF_TXD */
>> - gpio-export,name = "gpio8";
>> - gpio-export,direction_may_change = <1>;
>> - gpios = <&gpio0 8 0>;
>> - };
>> -
>> - gpio9 {
>> - /* UARTF_CTS_N */
>> - gpio-export,name = "gpio9";
>> - gpio-export,direction_may_change = <1>;
>> - gpios = <&gpio0 9 0>;
>> + gpios = <&gpio0 11 0>;
>> };
>>
>> gpio12 {
>> diff --git a/target/linux/ramips/patches-3.18/0031-pinctrl-ralink-allow-functions-on-multiple-groups.patch b/target/linux/ramips/patches-3.18/0031-pinctrl-ralink-allow-functions-on-multiple-groups.patch
>> new file mode 100644
>> index 0000000..1eab406
>> --- /dev/null
>> +++ b/target/linux/ramips/patches-3.18/0031-pinctrl-ralink-allow-functions-on-multiple-groups.patch
>> @@ -0,0 +1,98 @@
>> +diff -Naur a/arch/mips/include/asm/mach-ralink/pinmux.h b/arch/mips/include/asm/mach-ralink/pinmux.h
>> +--- a/arch/mips/include/asm/mach-ralink/pinmux.h 2015-11-02 05:32:57.227437903 -0600
>> ++++ b/arch/mips/include/asm/mach-ralink/pinmux.h 2015-11-03 02:50:33.128049900 -0600
>> +@@ -31,6 +31,7 @@
>> + int *pins;
>> +
>> + int *groups;
>> ++ int **group_names;
>> + int group_count;
>> +
>> + int enabled;
>> +diff -Naur a/arch/mips/ralink/rt305x.c b/arch/mips/ralink/rt305x.c
>> +--- a/arch/mips/ralink/rt305x.c 2015-11-02 05:33:44.932237317 -0600
>> ++++ b/arch/mips/ralink/rt305x.c 2015-11-03 02:49:49.255271419 -0600
>> +@@ -23,6 +23,22 @@
>> +
>> + static struct rt2880_pmx_func i2c_func[] = { FUNC("i2c", 0, 1, 2) };
>> + static struct rt2880_pmx_func spi_func[] = { FUNC("spi", 0, 3, 4) };
>> ++static struct rt2880_pmx_func uartf_low_func[] = {
>> ++ FUNC("pcm uartf", RT305X_GPIO_MODE_PCM_UARTF, 7, 4),
>> ++ FUNC("pcm i2s", RT305X_GPIO_MODE_PCM_I2S, 7, 4),
>> ++ FUNC("uartf i2s", RT305X_GPIO_MODE_I2S_UARTF, 7, 4),
>> ++ FUNC("pcm gpio", RT305X_GPIO_MODE_PCM_GPIO, 7, 4),
>> ++ FUNC("gpio uartf", RT305X_GPIO_MODE_GPIO_UARTF, 7, 4),
>> ++ FUNC("gpio i2s", RT305X_GPIO_MODE_GPIO_I2S, 7, 4),
>> ++};
>> ++static struct rt2880_pmx_func uartf_high_func[] = {
>> ++ FUNC("pcm uartf", RT305X_GPIO_MODE_PCM_UARTF, 11, 4),
>> ++ FUNC("pcm i2s", RT305X_GPIO_MODE_PCM_I2S, 11, 4),
>> ++ FUNC("uartf i2s", RT305X_GPIO_MODE_I2S_UARTF, 11, 4),
>> ++ FUNC("pcm gpio", RT305X_GPIO_MODE_PCM_GPIO, 11, 4),
>> ++ FUNC("gpio uartf", RT305X_GPIO_MODE_GPIO_UARTF, 11, 4),
>> ++ FUNC("gpio i2s", RT305X_GPIO_MODE_GPIO_I2S, 11, 4),
>> ++};
>> + static struct rt2880_pmx_func uartf_func[] = {
>> + FUNC("uartf", RT305X_GPIO_MODE_UARTF, 7, 8),
>> + FUNC("pcm uartf", RT305X_GPIO_MODE_PCM_UARTF, 7, 8),
>> +@@ -80,6 +96,10 @@
>> + GRP("spi", spi_func, 1, RT305X_GPIO_MODE_SPI),
>> + GRP("uartf", uartf_func, RT305X_GPIO_MODE_UART0_MASK,
>> + RT305X_GPIO_MODE_UART0_SHIFT),
>> ++ GRP("uartf_low", uartf_low_func, RT305X_GPIO_MODE_GPIO_UARTF,
>> ++ RT305X_GPIO_MODE_UART0_SHIFT),
>> ++ GRP("uartf_high", uartf_high_func, RT305X_GPIO_MODE_GPIO_UARTF,
>> ++ RT305X_GPIO_MODE_UART0_SHIFT),
>> + GRP("uartlite", uartlite_func, 1, RT305X_GPIO_MODE_UART1),
>> + GRP("jtag", jtag_func, 1, RT305X_GPIO_MODE_JTAG),
>> + GRP("led", rt5350_led_func, 1, RT5350_GPIO_MODE_PHY_LED),
>> +diff -Naur a/drivers/pinctrl/pinctrl-rt2880.c b/drivers/pinctrl/pinctrl-rt2880.c
>> +--- a/drivers/pinctrl/pinctrl-rt2880.c 2015-11-02 05:34:31.585019384 -0600
>> ++++ b/drivers/pinctrl/pinctrl-rt2880.c 2015-11-03 02:51:30.981079814 -0600
>> +@@ -188,12 +188,8 @@
>> + unsigned * const num_groups)
>> + {
>> + struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
>> +-
>> +- if (p->func[func]->group_count == 1)
>> +- *groups = &p->group_names[p->func[func]->groups[0]];
>> +- else
>> +- *groups = p->group_names;
>> +-
>> ++ if (p->func[func]->group_count != 0)
>> ++ *groups = p->func[func]->group_names;
>> + *num_groups = p->func[func]->group_count;
>> +
>> + return 0;
>> +@@ -319,12 +315,30 @@
>> + for (i = 0; i < p->group_count; i++) {
>> + for (j = 0; j < p->groups[i].func_count; j++) {
>> + f[c] = &p->groups[i].func[j];
>> +- f[c]->groups = devm_kzalloc(p->dev, sizeof(int), GFP_KERNEL);
>> ++ f[c]->groups = devm_kzalloc(p->dev, sizeof(int) * p->group_count, GFP_KERNEL);
>> ++ if (!f[c]->groups)
>> ++ return -1;
>> ++ f[c]->group_names = devm_kzalloc(p->dev, sizeof(char *) * p->group_count, GFP_KERNEL);
>> ++ if (!f[c]->group_names)
>> ++ return -1;
>> + f[c]->groups[0] = i;
>> + f[c]->group_count = 1;
>> + c++;
>> + }
>> + }
>> ++ f[0]->group_names = p->group_names;
>> ++ for (c = 1; c < p->func_count; c++) {
>> ++ f[c]->group_count = 0;
>> ++ for (i = 0; i < p->group_count; i++) {
>> ++ for (j = 0; j < p->groups[i].func_count; j++) {
>> ++ if (strcmp(f[c]->name, p->groups[i].func[j].name) == 0) {
>> ++ f[c]->groups[f[c]->group_count] = i;
>> ++ f[c]->group_names[f[c]->group_count] = p->groups[i].name;
>> ++ f[c]->group_count++;
>> ++ }
>> ++ }
>> ++ }
>> ++ }
>> + return 0;
>> + }
>> +
>> --
>> 2.1.4
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list