[OpenWrt-Devel] [PATCH 1/3] ar71xx: add GL-AR150 support V2
John Crispin
blogic at openwrt.org
Sat Nov 21 12:35:30 EST 2015
Hi
comment 1 inline
On 17/11/2015 04:37, alzhao wrote:
> Added GL-AR150 support to latest trunk. Tested and works good.
>
> Signed-off-by: Alzhao<alzhao at gmail.com>
> ---
> .../ar71xx/base-files/etc/uci-defaults/01_leds | 4 +
> .../ar71xx/base-files/etc/uci-defaults/02_network | 1 +
> target/linux/ar71xx/base-files/lib/ar71xx.sh | 3 +
> .../ar71xx/base-files/lib/upgrade/platform.sh | 1 +
> target/linux/ar71xx/config-4.1 | 1 +
> .../ar71xx/files/arch/mips/ath79/mach-gl-ar150.c | 125 +++++++++++++++++++++
> target/linux/ar71xx/generic/profiles/gl-connect.mk | 17 ---
> target/linux/ar71xx/generic/profiles/gli.mk | 27 +++++
> target/linux/ar71xx/image/Makefile | 8 ++
> .../patches-4.1/911-MIPS-ath79-add-gl_ar150.patch | 39 +++++++
> 10 files changed, 209 insertions(+), 17 deletions(-)
> create mode 100644 target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar150.c
> delete mode 100644 target/linux/ar71xx/generic/profiles/gl-connect.mk
> create mode 100644 target/linux/ar71xx/generic/profiles/gli.mk
> create mode 100644 target/linux/ar71xx/patches-4.1/911-MIPS-ath79-add-gl_ar150.patch
>
> diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
> index 39f472a..25f9d13 100644
> --- a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
> +++ b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
> @@ -211,6 +211,10 @@ dlan-pro-1200-ac)
> ucidef_set_led_trigger_gpio "plcr" "dLAN" "devolo:error:dlan" "16" "0"
> ;;
>
> +gl-ar150)
> + ucidef_set_led_wlan "wlan" "WLAN" "gl_ar150:wlan" "phy0tpt"
> + ;;
> +
> gl-inet)
> ucidef_set_led_netdev "lan" "LAN" "gl-connect:green:lan" "eth1"
> ucidef_set_led_wlan "wlan" "WLAN" "gl-connect:red:wlan" "phy0tpt"
> diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
> index 2765adb..2ba1fbd 100644
> --- a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
> +++ b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
> @@ -396,6 +396,7 @@ dir-505-a1)
> alfa-ap96 |\
> alfa-nx |\
> ap83 |\
> +gl-ar150 |\
> gl-inet |\
> jwap003 |\
> pb42 |\
> diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
> index 0e92ee7..9848906 100755
> --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
> +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
> @@ -478,6 +478,9 @@ ar71xx_board_detect() {
> name="gl-inet"
> gl_inet_board_detect
> ;;
> + *"GL AR150")
> + name="gl-ar150"
> + ;;
it looks like the indenting is wrong here. please fix and resend the patch
John
> *"EnGenius EPG5000")
> name="epg5000"
> ;;
> diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
> index b97c076..8ea11b4 100755
> --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
> +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
> @@ -219,6 +219,7 @@ platform_check_image() {
> esr900 | \
> ew-dorin | \
> ew-dorin-router | \
> + gl-ar150 | \
> hiwifi-hc6361 | \
> hornet-ub-x2 | \
> mzk-w04nu | \
> diff --git a/target/linux/ar71xx/config-4.1 b/target/linux/ar71xx/config-4.1
> index 08e252d..72b47eb 100644
> --- a/target/linux/ar71xx/config-4.1
> +++ b/target/linux/ar71xx/config-4.1
> @@ -75,6 +75,7 @@ CONFIG_ATH79_MACH_ESR1750=y
> CONFIG_ATH79_MACH_ESR900=y
> CONFIG_ATH79_MACH_EW_DORIN=y
> CONFIG_ATH79_MACH_F9K1115V2=y
> +CONFIG_ATH79_MACH_GL_AR150=y
> CONFIG_ATH79_MACH_GL_INET=y
> CONFIG_ATH79_MACH_GS_MINIBOX_V1=y
> CONFIG_ATH79_MACH_GS_OOLITE=y
> diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar150.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar150.c
> new file mode 100644
> index 0000000..310182c
> --- /dev/null
> +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar150.c
> @@ -0,0 +1,125 @@
> +/*
> + * GL_ar150 board support
> + *
> + * Copyright (C) 2011 dongyuqi <729650915 at qq.com>
> + * Copyright (C) 2011-2012 Gabor Juhos <juhosg at openwrt.org>
> + * Copyright (C) 2013 alzhao <alzhao at gmail.com>
> + * Copyright (C) 2014 Michel Stempin <michel.stempin at wanadoo.fr>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published
> + * by the Free Software Foundation.
> +*/
> +
> +#include <linux/gpio.h>
> +
> +#include <asm/mach-ath79/ath79.h>
> +
> +#include "dev-eth.h"
> +#include "dev-gpio-buttons.h"
> +#include "dev-leds-gpio.h"
> +#include "dev-m25p80.h"
> +#include "dev-usb.h"
> +#include "dev-wmac.h"
> +#include "machtypes.h"
> +
> +#define GL_AR150_GPIO_LED_WLAN 0
> +#define GL_AR150_GPIO_LED_LAN 13
> +#define GL_AR150_GPIO_LED_WAN 15
> +
> +#define GL_AR150_GPIO_BIN_USB 6
> +#define GL_AR150_GPIO_BTN_MANUAL 7
> +#define GL_AR150_GPIO_BTN_AUTO 8
> +#define GL_AR150_GPIO_BTN_RESET 11
> +
> +#define GL_AR150_KEYS_POLL_INTERVAL 20 /* msecs */
> +#define GL_AR150_KEYS_DEBOUNCE_INTERVAL (3 * GL_AR150_KEYS_POLL_INTERVAL)
> +
> +#define GL_AR150_MAC0_OFFSET 0x0000
> +#define GL_AR150_MAC1_OFFSET 0x0000
> +#define GL_AR150_CALDATA_OFFSET 0x1000
> +#define GL_AR150_WMAC_MAC_OFFSET 0x0000
> +
> +static struct gpio_led gl_ar150_leds_gpio[] __initdata = {
> + {
> + .name = "gl_ar150:wlan",
> + .gpio = GL_AR150_GPIO_LED_WLAN,
> + .active_low = 0,
> + },
> + {
> + .name = "gl_ar150:lan",
> + .gpio = GL_AR150_GPIO_LED_LAN,
> + .active_low = 0,
> + },
> + {
> + .name = "gl_ar150:wan",
> + .gpio = GL_AR150_GPIO_LED_WAN,
> + .active_low = 0,
> + .default_state = 1,
> + },
> +};
> +
> +static struct gpio_keys_button gl_ar150_gpio_keys[] __initdata = {
> + {
> + .desc = "BTN_7",
> + .type = EV_KEY,
> + .code = BTN_7,
> + .debounce_interval = GL_AR150_KEYS_DEBOUNCE_INTERVAL,
> + .gpio = GL_AR150_GPIO_BTN_MANUAL,
> + .active_low = 0,
> + },
> + {
> + .desc = "BTN_8",
> + .type = EV_KEY,
> + .code = BTN_8,
> + .debounce_interval = GL_AR150_KEYS_DEBOUNCE_INTERVAL,
> + .gpio = GL_AR150_GPIO_BTN_AUTO,
> + .active_low = 0,
> + },
> + {
> + .desc = "reset",
> + .type = EV_KEY,
> + .code = KEY_RESTART,
> + .debounce_interval = GL_AR150_KEYS_DEBOUNCE_INTERVAL,
> + .gpio = GL_AR150_GPIO_BTN_RESET,
> + .active_low = 0,
> + },
> +};
> +
> +static void __init gl_ar150_setup(void)
> +{
> +
> + /* ART base address */
> + u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
> +
> + /* disable PHY_SWAP and PHY_ADDR_SWAP bits */
> + ath79_setup_ar933x_phy4_switch(false, false);
> +
> + /* register flash. */
> + ath79_register_m25p80(NULL);
> +
> + /* register gpio LEDs and keys */
> + ath79_register_leds_gpio(-1, ARRAY_SIZE(gl_ar150_leds_gpio),
> + gl_ar150_leds_gpio);
> + ath79_register_gpio_keys_polled(-1, GL_AR150_KEYS_POLL_INTERVAL,
> + ARRAY_SIZE(gl_ar150_gpio_keys),
> + gl_ar150_gpio_keys);
> +
> + /* enable usb */
> + gpio_request_one(GL_AR150_GPIO_BIN_USB,
> + GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
> + "USB power");
> + ath79_register_usb();
> +
> + /* register eth0 as WAN, eth1 as LAN */
> + ath79_init_mac(ath79_eth0_data.mac_addr, art+GL_AR150_MAC0_OFFSET, 0);
> + ath79_init_mac(ath79_eth1_data.mac_addr, art+GL_AR150_MAC1_OFFSET, 0);
> + ath79_register_mdio(0, 0x0);
> + ath79_register_eth(0);
> + ath79_register_eth(1);
> +
> + /* register wireless mac with cal data */
> + ath79_register_wmac(art + GL_AR150_CALDATA_OFFSET, art + GL_AR150_WMAC_MAC_OFFSET);
> +}
> +
> +MIPS_MACHINE(ATH79_MACH_GL_AR150, "GL-AR150", "GL AR150",gl_ar150_setup);
> diff --git a/target/linux/ar71xx/generic/profiles/gl-connect.mk b/target/linux/ar71xx/generic/profiles/gl-connect.mk
> deleted file mode 100644
> index e9377db..0000000
> --- a/target/linux/ar71xx/generic/profiles/gl-connect.mk
> +++ /dev/null
> @@ -1,17 +0,0 @@
> -#
> -# Copyright (C) 2014 OpenWrt.org
> -#
> -# This is free software, licensed under the GNU General Public License v2.
> -# See /LICENSE for more information.
> -#
> -
> -define Profile/GLINET
> - NAME:=GL.iNet
> - PACKAGES:=kmod-usb-core kmod-usb2
> -endef
> -
> -define Profile/GLINET/Description
> - Package set optimized for the GL-Connect GL.iNet v1.
> -endef
> -
> -$(eval $(call Profile,GLINET))
> diff --git a/target/linux/ar71xx/generic/profiles/gli.mk b/target/linux/ar71xx/generic/profiles/gli.mk
> new file mode 100644
> index 0000000..a6ad661
> --- /dev/null
> +++ b/target/linux/ar71xx/generic/profiles/gli.mk
> @@ -0,0 +1,27 @@
> +#
> +# Copyright (C) 2013 OpenWrt.org
> +#
> +# This is free software, licensed under the GNU General Public License v2.
> +# See /LICENSE for more information.
> +#
> +define Profile/GLINET
> + NAME:=GL.iNet 6416
> + PACKAGES:=kmod-usb-core kmod-usb2
> +endef
> +
> +define Profile/GLINET/Description
> + Package set optimized for the GL-Connect GL.iNet v1.
> +endef
> +
> +$(eval $(call Profile,GLINET))
> +
> +define Profile/GL-AR150
> + NAME:=GL AR150
> + PACKAGES:=kmod-usb-core kmod-usb2
> +endef
> +
> +define Profile/GL-AR150/Description
> + Configuration of GL AR150.
> +endef
> +
> +$(eval $(call Profile,GL-AR150))
> diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile
> index 0484f07..a638caf 100644
> --- a/target/linux/ar71xx/image/Makefile
> +++ b/target/linux/ar71xx/image/Makefile
> @@ -188,6 +188,14 @@ define Device/weio
> endef
> TARGET_DEVICES += weio
>
> +define Device/gl-ar150
> + BOARDNAME = GL-AR150
> + IMAGE_SIZE = 16000k
> + CONSOLE = ttyATH0,115200
> + MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
> +endef
> +TARGET_DEVICES += gl-ar150
> +
> define Device/wndr3700
> BOARDNAME = WNDR3700
> NETGEAR_KERNEL_MAGIC = 0x33373030
> diff --git a/target/linux/ar71xx/patches-4.1/911-MIPS-ath79-add-gl_ar150.patch b/target/linux/ar71xx/patches-4.1/911-MIPS-ath79-add-gl_ar150.patch
> new file mode 100644
> index 0000000..8c7b4d7
> --- /dev/null
> +++ b/target/linux/ar71xx/patches-4.1/911-MIPS-ath79-add-gl_ar150.patch
> @@ -0,0 +1,39 @@
> +--- a/arch/mips/ath79/Kconfig
> ++++ b/arch/mips/ath79/Kconfig
> +@@ -577,6 +577,16 @@ config ATH79_MACH_EL_MINI
> + select ATH79_DEV_USB
> + select ATH79_DEV_WMAC
> +
> ++config ATH79_MACH_GL_AR150
> ++ bool "GL AR150 support"
> ++ select SOC_AR933X
> ++ select ATH79_DEV_ETH
> ++ select ATH79_DEV_GPIO_BUTTONS
> ++ select ATH79_DEV_LEDS_GPIO
> ++ select ATH79_DEV_M25P80
> ++ select ATH79_DEV_USB
> ++ select ATH79_DEV_WMAC
> ++
> + config ATH79_MACH_GL_INET
> + bool "GL-INET support"
> + select SOC_AR933X
> +--- a/arch/mips/ath79/Makefile
> ++++ b/arch/mips/ath79/Makefile
> +@@ -83,6 +83,7 @@ obj-$(CONFIG_ATH79_MACH_EL_MINI) += mach
> + obj-$(CONFIG_ATH79_MACH_EPG5000) += mach-epg5000.o
> + obj-$(CONFIG_ATH79_MACH_ESR1750) += mach-esr1750.o
> + obj-$(CONFIG_ATH79_MACH_F9K1115V2) += mach-f9k1115v2.o
> ++obj-$(CONFIG_ATH79_MACH_GL_AR150) += mach-gl-ar150.o
> + obj-$(CONFIG_ATH79_MACH_GL_INET) += mach-gl-inet.o
> + obj-$(CONFIG_ATH79_MACH_GS_MINIBOX_V1) += mach-gs-minibox-v1.o
> + obj-$(CONFIG_ATH79_MACH_GS_OOLITE) += mach-gs-oolite.o
> +--- a/arch/mips/ath79/machtypes.h
> ++++ b/arch/mips/ath79/machtypes.h
> +@@ -72,6 +72,7 @@ enum ath79_mach_type {
> + ATH79_MACH_ESR1750, /* EnGenius ESR1750 */
> + ATH79_MACH_EPG5000, /* EnGenius EPG5000 */
> + ATH79_MACH_F9K1115V2, /* Belkin AC1750DB */
> ++ ATH79_MACH_GL_AR150, /* GL-AR150 support */
> + ATH79_MACH_GL_INET, /* GL-CONNECT GL-INET */
> + ATH79_MACH_GS_MINIBOX_V1, /* Gainstrong MiniBox V1.0 */
> + ATH79_MACH_GS_OOLITE, /* GS OOLITE V1.0 */
>
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list