[OpenWrt-Devel] [PATCH] lantiq: add phy led config support over devicetree bindings
Florian Eckert
eckert.florian at googlemail.com
Mon Nov 9 07:24:39 EST 2015
---
This patch adds the posibility to config the led behaviour of the lantiq phys
over the devicetree bindings. It patches the 0023-NET-PHY-adds-driver-for-lantiq-PHY11G
for 3.18 and 4.1. I have also added a register description overview for
applicable values.
...023-NET-PHY-adds-driver-for-lantiq-PHY11G.patch | 268 ++++++++++++++++++++-
...023-NET-PHY-adds-driver-for-lantiq-PHY11G.patch | 268 ++++++++++++++++++++-
2 files changed, 534 insertions(+), 2 deletions(-)
mode change 100644 => 100755 target/linux/lantiq/patches-3.18/0023-NET-PHY-adds-driver-for-lantiq-PHY11G.patch
diff --git a/target/linux/lantiq/patches-3.18/0023-NET-PHY-adds-driver-for-lantiq-PHY11G.patch b/target/linux/lantiq/patches-3.18/0023-NET-PHY-adds-driver-for-lantiq-PHY11G.patch
old mode 100644
new mode 100755
index 6d1805f..55db4c7
--- a/target/linux/lantiq/patches-3.18/0023-NET-PHY-adds-driver-for-lantiq-PHY11G.patch
+++ b/target/linux/lantiq/patches-3.18/0023-NET-PHY-adds-driver-for-lantiq-PHY11G.patch
@@ -37,7 +37,7 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
obj-$(CONFIG_AT803X_PHY) += at803x.o
--- /dev/null
+++ b/drivers/net/phy/lantiq.c
-@@ -0,0 +1,231 @@
+@@ -0,0 +1,278 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
@@ -58,6 +58,7 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
+
+#include <linux/module.h>
+#include <linux/phy.h>
++#include <linux/of.h>
+
+#define MII_MMDCTRL 0x0d
+#define MII_MMDDATA 0x0e
@@ -104,6 +105,50 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
+ return 0;
+}
+
++#if IS_ENABLED(CONFIG_OF_MDIO)
++static int vr9_gphy_of_reg_init(struct phy_device *phydev)
++{
++ u32 tmp;
++
++ /* store the led values if one was passed by the devicetree */
++ if (!of_property_read_u32(phydev->dev.of_node, "lantiq,ledch", &tmp))
++ vr9_gphy_mmd_write(phydev, 0x1e0, tmp);
++
++ if (!of_property_read_u32(phydev->dev.of_node, "lantiq,ledcl", &tmp))
++ vr9_gphy_mmd_write(phydev, 0x1e1, tmp);
++
++ if (!of_property_read_u32(phydev->dev.of_node, "lantiq,led0h", &tmp))
++ vr9_gphy_mmd_write(phydev, 0x1e2, tmp);
++
++ if (!of_property_read_u32(phydev->dev.of_node, "lantiq,led0l", &tmp))
++ vr9_gphy_mmd_write(phydev, 0x1e3, tmp);
++
++ if (!of_property_read_u32(phydev->dev.of_node, "lantiq,led1h", &tmp))
++ vr9_gphy_mmd_write(phydev, 0x1e4, tmp);
++
++ if (!of_property_read_u32(phydev->dev.of_node, "lantiq,led1l", &tmp))
++ vr9_gphy_mmd_write(phydev, 0x1e5, tmp);
++ if (!of_property_read_u32(phydev->dev.of_node, "lantiq,led2h", &tmp))
++ vr9_gphy_mmd_write(phydev, 0x1e6, tmp);
++
++ if (!of_property_read_u32(phydev->dev.of_node, "lantiq,led2l", &tmp))
++ vr9_gphy_mmd_write(phydev, 0x1e7, tmp);
++
++ if (!of_property_read_u32(phydev->dev.of_node, "lantiq,led3h", &tmp))
++ vr9_gphy_mmd_write(phydev, 0x1e8, tmp);
++
++ if (!of_property_read_u32(phydev->dev.of_node, "lantiq,led3l", &tmp))
++ vr9_gphy_mmd_write(phydev, 0x1e9, tmp);
++
++ return 0;
++}
++#else
++static int vr9_gphy_of_reg_init(struct phy_device *phydev)
++{
++ return 0;
++}
++#endif /* CONFIG_OF_MDIO */
++
+static int vr9_gphy_config_init(struct phy_device *phydev)
+{
+ int err;
@@ -129,6 +174,8 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
+ vr9_gphy_mmd_write(phydev, 0x1e8, 0x40);
+ vr9_gphy_mmd_write(phydev, 0x1e9, 0x20);
+
++ vr9_gphy_of_reg_init(phydev);
++
+ return 0;
+}
+
@@ -269,3 +316,222 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
+MODULE_DESCRIPTION("Lantiq PHY drivers");
+MODULE_AUTHOR("Daniel Schwierzeck <daniel.schwierzeck at googlemail.com>");
+MODULE_LICENSE("GPL");
+--- /dev/null
++++ b/Documentation/devicetree/bindings/phy/phy-lanitq.txt
+@@ -0,0 +1,216 @@
++Lanitq PHY binding
++============================================
++
++This devicetree binding controls the lantiq ethernet phys led functionality.
++
++Example:
++ mdio at 0 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ compatible = "lantiq,xrx200-mdio";
++ phy5: ethernet-phy at 5 {
++ reg = <0x1>;
++ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
++ };
++ phy11: ethernet-phy at 11 {
++ reg = <0x11>;
++ compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
++ lantiq,led2h = <0x00>;
++ lantiq,led2l = <0x03>;
++ };
++ phy12: ethernet-phy at 12 {
++ reg = <0x12>;
++ compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
++ lantiq,led1h = <0x00>;
++ lantiq,led1l = <0x03>;
++ };
++ phy13: ethernet-phy at 13 {
++ reg = <0x13>;
++ compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
++ lantiq,led2h = <0x00>;
++ lantiq,led2l = <0x03>;
++ };
++ phy14: ethernet-phy at 14 {
++ reg = <0x14>;
++ compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
++ lantiq,led1h = <0x00>;
++ lantiq,led1l = <0x03>;
++ };
++ };
++
++Register Description
++============================================
++
++LEDCH:
++
++Name Hardware Reset Value
++LEDCH 0x00C5
++
++| 15 | | | | | | | 8 |
++=========================================
++| RES |
++=========================================
++
++| 7 | | | | | | | 0 |
++=========================================
++| FBF | SBF |RES | NACS |
++=========================================
++
++Field Bits Type Description
++FBC 7:6 RW Fast Blink Frequency
++ ---
++ 0x0 (00b) F02HZ 2 Hz blinking frequency
++ 0x1 (01b) F04HZ 4 Hz blinking frequency
++ 0x2 (10b) F08HZ 8 Hz blinking frequency
++ 0x3 (11b) F16HZ 16 Hz blinking frequency
++
++SBF 5:4 RW Slow Blink Frequency
++ ---
++ 0x0 (00b) F02HZ 2 Hz blinking frequency
++ 0x1 (01b) F04HZ 4 Hz blinking frequency
++ 0x2 (10b) F08HZ 8 Hz blinking frequency
++ 0x3 (11b) F16HZ 16 Hz blinking frequency
++
++NACS 2:0 RW Inverse of Scan Function
++ ---
++ 0x0 (000b) NONE No Function
++ 0x1 (001b) LINK Complex function enabled when link is up
++ 0x2 (010b) PDOWN Complex function enabled when device is powered-down
++ 0x3 (011b) EEE Complex function enabled when device is in EEE mode
++ 0x4 (100b) ANEG Complex function enabled when auto-negotiation is running
++ 0x5 (101b) ABIST Complex function enabled when analog self-test is running
++ 0x6 (110b) CDIAG Complex function enabled when cable diagnostics are running
++ 0x7 (111b) TEST Complex function enabled when test mode is running
++
++LEDCL:
++
++Name Hardware Reset Value
++LEDCL 0x0067
++
++| 15 | | | | | | | 8 |
++=========================================
++| RES |
++=========================================
++
++| 7 | | | | | | | 0 |
++=========================================
++|RES | SCAN |RES | CBLINK |
++=========================================
++
++Field Bits Type Description
++SCAN 6:4 RW Complex Scan Configuration
++ ---
++ 000 B NONE No Function
++ 001 B LINK Complex function enabled when link is up
++ 010 B PDOWN Complex function enabled when device is powered-down
++ 011 B EEE Complex function enabled when device is in EEE mode
++ 100 B ANEG Complex function enabled when auto-negotiation is running
++ 101 B ABIST Complex function enabled when analog self-test is running
++ 110 B CDIAG Complex function enabled when cable diagnostics are running
++ 111 B TEST Complex function enabled when test mode is running
++
++CBLINK 2:0 RW Complex Blinking Configuration
++ ---
++ 000 B NONE No Function
++ 001 B LINK Complex function enabled when link is up
++ 010 B PDOWN Complex function enabled when device is powered-down
++ 011 B EEE Complex function enabled when device is in EEE mode
++ 100 B ANEG Complex function enabled when auto-negotiation is running
++ 101 B ABIST Complex function enabled when analog self-test is running
++ 110 B CDIAG Complex function enabled when cable diagnostics are running
++ 111 B TEST Complex function enabled when test mode is running
++
++LEDxH:
++
++Name Hardware Reset Value
++LED0H 0x0070
++LED1H 0x0020
++LED2H 0x0040
++LED3H 0x0040
++
++| 15 | | | | | | | 8 |
++=========================================
++| RES |
++=========================================
++
++| 7 | | | | | | | 0 |
++=========================================
++| CON | BLINKF |
++=========================================
++
++Field Bits Type Description
++CON 7:4 RW Constant On Configuration
++ ---
++ 0x0 (0000b) NONE LED does not light up constantly
++ 0x1 (0001b) LINK10 LED is on when link is 10 Mbit/s
++ 0x2 (0010b) LINK100 LED is on when link is 100 Mbit/s
++ 0x3 (0011b) LINK10X LED is on when link is 10/100 Mbit/s
++ 0x4 (0100b) LINK1000 LED is on when link is 1000 Mbit/s
++ 0x5 (0101b) LINK10_0 LED is on when link is 10/1000 Mbit/s
++ 0x6 (0110b) LINK100X LED is on when link is 100/1000 Mbit/s
++ 0x7 (0111b) LINK10XX LED is on when link is 10/100/1000 Mbit/s
++ 0x8 (1000b) PDOWN LED is on when device is powered-down
++ 0x9 (1001b) EEE LED is on when device is in EEE mode
++ 0xA (1010b) ANEG LED is on when auto-negotiation is running
++ 0xB (1011b) ABIST LED is on when analog self-test is running
++ 0xC (1100b) CDIAG LED is on when cable diagnostics are running
++
++BLINKF 3:0 RW Fast Blinking Configuration
++ ---
++ 0x0 (0000b) NONE No Blinking
++ 0x1 (0001b) LINK10 Blink when link is 10 Mbit/s
++ 0x2 (0010b) LINK100 Blink when link is 100 Mbit/s
++ 0x3 (0011b) LINK10X Blink when link is 10/100 Mbit/s
++ 0x4 (0100b) LINK1000 Blink when link is 1000 Mbit/s
++ 0x5 (0101b) LINK10_0 Blink when link is 10/1000 Mbit/s
++ 0x6 (0110b) LINK100X Blink when link is 100/1000 Mbit/s
++ 0x7 (0111b) LINK10XX Blink when link is 10/100/1000 Mbit/s
++ 0x8 (1000b) PDOWN Blink when device is powered-down
++ 0x9 (1001b) EEE Blink when device is in EEE mode
++ 0xA (1010b) ANEG Blink when auto-negotiation is running
++ 0xB (1011b) ABIST Blink when analog self-test is running
++ 0xC (1100b) CDIAG Blink when cable diagnostics are running
++
++LEDxL:
++
++Name Hardware Reset Value
++LED0L 0x0003
++LED1L 0x0000
++LED2L 0x0000
++LED3L 0x0020
++
++| 15 | | | | | | | 8 |
++=========================================
++| RES |
++=========================================
++
++| 7 | | | | | | | 0 |
++=========================================
++| BLINKS | PULSE |
++=========================================
++
++Field Bits Type Description
++BLINKS 7:4 RW Slow Blinkin Configuration
++ ---
++ 0x0 (0000b) NONE No Blinking
++ 0x1 (0001b) LINK10 Blink when link is 10 Mbit/s
++ 0x2 (0010b) LINK100 Blink when link is 100 Mbit/s
++ 0x3 (0011b) LINK10X Blink when link is 10/100 Mbit/s
++ 0x4 (0100b) LINK1000 Blink when link is 1000 Mbit/s
++ 0x5 (0101b) LINK10_0 Blink when link is 10/1000 Mbit/s
++ 0x6 (0110b) LINK100X Blink when link is 100/1000 Mbit/s
++ 0x7 (0111b) LINK10XX Blink when link is 10/100/1000 Mbit/s
++ 0x8 (1000b) PDOWN Blink when device is powered-down
++ 0x9 (1001b) EEE Blink when device is in EEE mode
++ 0xA (1010b) ANEG Blink when auto-negotiation is running
++ 0xB (1011b) ABIST Blink when analog self-test is running
++ 0xC (1100b) CDIAG Blink when cable diagnostics are runningning
++
++PULSE 3:0 RW Pulsing Configuration
++ The pulse field is a mask field by which certain events can be combined
++ ---
++ 0x0 (0000b) NONE No pulsing
++ 0x1 (0001b) TXACT Transmit activity
++ 0x2 (0010b) RXACT Receive activity
++ 0x4 (0100b) COL Collision
++ 0x8 (1000b) RES Reserved
diff --git a/target/linux/lantiq/patches-4.1/0023-NET-PHY-adds-driver-for-lantiq-PHY11G.patch b/target/linux/lantiq/patches-4.1/0023-NET-PHY-adds-driver-for-lantiq-PHY11G.patch
index 08e6b64..3f50a3b 100644
--- a/target/linux/lantiq/patches-4.1/0023-NET-PHY-adds-driver-for-lantiq-PHY11G.patch
+++ b/target/linux/lantiq/patches-4.1/0023-NET-PHY-adds-driver-for-lantiq-PHY11G.patch
@@ -37,7 +37,7 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
obj-$(CONFIG_AT803X_PHY) += at803x.o
--- /dev/null
+++ b/drivers/net/phy/lantiq.c
-@@ -0,0 +1,231 @@
+@@ -0,0 +1,278 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
@@ -58,6 +58,7 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
+
+#include <linux/module.h>
+#include <linux/phy.h>
++#include <linux/of.h>
+
+#define MII_MMDCTRL 0x0d
+#define MII_MMDDATA 0x0e
@@ -104,6 +105,50 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
+ return 0;
+}
+
++#if IS_ENABLED(CONFIG_OF_MDIO)
++static int vr9_gphy_of_reg_init(struct phy_device *phydev)
++{
++ u32 tmp;
++
++ /* store the led values if one was passed by the devicetree */
++ if (!of_property_read_u32(phydev->dev.of_node, "lantiq,ledch", &tmp))
++ vr9_gphy_mmd_write(phydev, 0x1e0, tmp);
++
++ if (!of_property_read_u32(phydev->dev.of_node, "lantiq,ledcl", &tmp))
++ vr9_gphy_mmd_write(phydev, 0x1e1, tmp);
++
++ if (!of_property_read_u32(phydev->dev.of_node, "lantiq,led0h", &tmp))
++ vr9_gphy_mmd_write(phydev, 0x1e2, tmp);
++
++ if (!of_property_read_u32(phydev->dev.of_node, "lantiq,led0l", &tmp))
++ vr9_gphy_mmd_write(phydev, 0x1e3, tmp);
++
++ if (!of_property_read_u32(phydev->dev.of_node, "lantiq,led1h", &tmp))
++ vr9_gphy_mmd_write(phydev, 0x1e4, tmp);
++
++ if (!of_property_read_u32(phydev->dev.of_node, "lantiq,led1l", &tmp))
++ vr9_gphy_mmd_write(phydev, 0x1e5, tmp);
++ if (!of_property_read_u32(phydev->dev.of_node, "lantiq,led2h", &tmp))
++ vr9_gphy_mmd_write(phydev, 0x1e6, tmp);
++
++ if (!of_property_read_u32(phydev->dev.of_node, "lantiq,led2l", &tmp))
++ vr9_gphy_mmd_write(phydev, 0x1e7, tmp);
++
++ if (!of_property_read_u32(phydev->dev.of_node, "lantiq,led3h", &tmp))
++ vr9_gphy_mmd_write(phydev, 0x1e8, tmp);
++
++ if (!of_property_read_u32(phydev->dev.of_node, "lantiq,led3l", &tmp))
++ vr9_gphy_mmd_write(phydev, 0x1e9, tmp);
++
++ return 0;
++}
++#else
++static int vr9_gphy_of_reg_init(struct phy_device *phydev)
++{
++ return 0;
++}
++#endif /* CONFIG_OF_MDIO */
++
+static int vr9_gphy_config_init(struct phy_device *phydev)
+{
+ int err;
@@ -129,6 +174,8 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
+ vr9_gphy_mmd_write(phydev, 0x1e8, 0x40);
+ vr9_gphy_mmd_write(phydev, 0x1e9, 0x20);
+
++ vr9_gphy_of_reg_init(phydev);
++
+ return 0;
+}
+
@@ -269,3 +316,222 @@ Signed-off-by: John Crispin <blogic at openwrt.org>
+MODULE_DESCRIPTION("Lantiq PHY drivers");
+MODULE_AUTHOR("Daniel Schwierzeck <daniel.schwierzeck at googlemail.com>");
+MODULE_LICENSE("GPL");
+--- /dev/null
++++ b/Documentation/devicetree/bindings/phy/phy-lanitq.txt
+@@ -0,0 +1,216 @@
++Lanitq PHY binding
++============================================
++
++This devicetree binding controls the lantiq ethernet phys led functionality.
++
++Example:
++ mdio at 0 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ compatible = "lantiq,xrx200-mdio";
++ phy5: ethernet-phy at 5 {
++ reg = <0x1>;
++ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
++ };
++ phy11: ethernet-phy at 11 {
++ reg = <0x11>;
++ compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
++ lantiq,led2h = <0x00>;
++ lantiq,led2l = <0x03>;
++ };
++ phy12: ethernet-phy at 12 {
++ reg = <0x12>;
++ compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
++ lantiq,led1h = <0x00>;
++ lantiq,led1l = <0x03>;
++ };
++ phy13: ethernet-phy at 13 {
++ reg = <0x13>;
++ compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
++ lantiq,led2h = <0x00>;
++ lantiq,led2l = <0x03>;
++ };
++ phy14: ethernet-phy at 14 {
++ reg = <0x14>;
++ compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
++ lantiq,led1h = <0x00>;
++ lantiq,led1l = <0x03>;
++ };
++ };
++
++Register Description
++============================================
++
++LEDCH:
++
++Name Hardware Reset Value
++LEDCH 0x00C5
++
++| 15 | | | | | | | 8 |
++=========================================
++| RES |
++=========================================
++
++| 7 | | | | | | | 0 |
++=========================================
++| FBF | SBF |RES | NACS |
++=========================================
++
++Field Bits Type Description
++FBC 7:6 RW Fast Blink Frequency
++ ---
++ 0x0 (00b) F02HZ 2 Hz blinking frequency
++ 0x1 (01b) F04HZ 4 Hz blinking frequency
++ 0x2 (10b) F08HZ 8 Hz blinking frequency
++ 0x3 (11b) F16HZ 16 Hz blinking frequency
++
++SBF 5:4 RW Slow Blink Frequency
++ ---
++ 0x0 (00b) F02HZ 2 Hz blinking frequency
++ 0x1 (01b) F04HZ 4 Hz blinking frequency
++ 0x2 (10b) F08HZ 8 Hz blinking frequency
++ 0x3 (11b) F16HZ 16 Hz blinking frequency
++
++NACS 2:0 RW Inverse of Scan Function
++ ---
++ 0x0 (000b) NONE No Function
++ 0x1 (001b) LINK Complex function enabled when link is up
++ 0x2 (010b) PDOWN Complex function enabled when device is powered-down
++ 0x3 (011b) EEE Complex function enabled when device is in EEE mode
++ 0x4 (100b) ANEG Complex function enabled when auto-negotiation is running
++ 0x5 (101b) ABIST Complex function enabled when analog self-test is running
++ 0x6 (110b) CDIAG Complex function enabled when cable diagnostics are running
++ 0x7 (111b) TEST Complex function enabled when test mode is running
++
++LEDCL:
++
++Name Hardware Reset Value
++LEDCL 0x0067
++
++| 15 | | | | | | | 8 |
++=========================================
++| RES |
++=========================================
++
++| 7 | | | | | | | 0 |
++=========================================
++|RES | SCAN |RES | CBLINK |
++=========================================
++
++Field Bits Type Description
++SCAN 6:4 RW Complex Scan Configuration
++ ---
++ 000 B NONE No Function
++ 001 B LINK Complex function enabled when link is up
++ 010 B PDOWN Complex function enabled when device is powered-down
++ 011 B EEE Complex function enabled when device is in EEE mode
++ 100 B ANEG Complex function enabled when auto-negotiation is running
++ 101 B ABIST Complex function enabled when analog self-test is running
++ 110 B CDIAG Complex function enabled when cable diagnostics are running
++ 111 B TEST Complex function enabled when test mode is running
++
++CBLINK 2:0 RW Complex Blinking Configuration
++ ---
++ 000 B NONE No Function
++ 001 B LINK Complex function enabled when link is up
++ 010 B PDOWN Complex function enabled when device is powered-down
++ 011 B EEE Complex function enabled when device is in EEE mode
++ 100 B ANEG Complex function enabled when auto-negotiation is running
++ 101 B ABIST Complex function enabled when analog self-test is running
++ 110 B CDIAG Complex function enabled when cable diagnostics are running
++ 111 B TEST Complex function enabled when test mode is running
++
++LEDxH:
++
++Name Hardware Reset Value
++LED0H 0x0070
++LED1H 0x0020
++LED2H 0x0040
++LED3H 0x0040
++
++| 15 | | | | | | | 8 |
++=========================================
++| RES |
++=========================================
++
++| 7 | | | | | | | 0 |
++=========================================
++| CON | BLINKF |
++=========================================
++
++Field Bits Type Description
++CON 7:4 RW Constant On Configuration
++ ---
++ 0x0 (0000b) NONE LED does not light up constantly
++ 0x1 (0001b) LINK10 LED is on when link is 10 Mbit/s
++ 0x2 (0010b) LINK100 LED is on when link is 100 Mbit/s
++ 0x3 (0011b) LINK10X LED is on when link is 10/100 Mbit/s
++ 0x4 (0100b) LINK1000 LED is on when link is 1000 Mbit/s
++ 0x5 (0101b) LINK10_0 LED is on when link is 10/1000 Mbit/s
++ 0x6 (0110b) LINK100X LED is on when link is 100/1000 Mbit/s
++ 0x7 (0111b) LINK10XX LED is on when link is 10/100/1000 Mbit/s
++ 0x8 (1000b) PDOWN LED is on when device is powered-down
++ 0x9 (1001b) EEE LED is on when device is in EEE mode
++ 0xA (1010b) ANEG LED is on when auto-negotiation is running
++ 0xB (1011b) ABIST LED is on when analog self-test is running
++ 0xC (1100b) CDIAG LED is on when cable diagnostics are running
++
++BLINKF 3:0 RW Fast Blinking Configuration
++ ---
++ 0x0 (0000b) NONE No Blinking
++ 0x1 (0001b) LINK10 Blink when link is 10 Mbit/s
++ 0x2 (0010b) LINK100 Blink when link is 100 Mbit/s
++ 0x3 (0011b) LINK10X Blink when link is 10/100 Mbit/s
++ 0x4 (0100b) LINK1000 Blink when link is 1000 Mbit/s
++ 0x5 (0101b) LINK10_0 Blink when link is 10/1000 Mbit/s
++ 0x6 (0110b) LINK100X Blink when link is 100/1000 Mbit/s
++ 0x7 (0111b) LINK10XX Blink when link is 10/100/1000 Mbit/s
++ 0x8 (1000b) PDOWN Blink when device is powered-down
++ 0x9 (1001b) EEE Blink when device is in EEE mode
++ 0xA (1010b) ANEG Blink when auto-negotiation is running
++ 0xB (1011b) ABIST Blink when analog self-test is running
++ 0xC (1100b) CDIAG Blink when cable diagnostics are running
++
++LEDxL:
++
++Name Hardware Reset Value
++LED0L 0x0003
++LED1L 0x0000
++LED2L 0x0000
++LED3L 0x0020
++
++| 15 | | | | | | | 8 |
++=========================================
++| RES |
++=========================================
++
++| 7 | | | | | | | 0 |
++=========================================
++| BLINKS | PULSE |
++=========================================
++
++Field Bits Type Description
++BLINKS 7:4 RW Slow Blinkin Configuration
++ ---
++ 0x0 (0000b) NONE No Blinking
++ 0x1 (0001b) LINK10 Blink when link is 10 Mbit/s
++ 0x2 (0010b) LINK100 Blink when link is 100 Mbit/s
++ 0x3 (0011b) LINK10X Blink when link is 10/100 Mbit/s
++ 0x4 (0100b) LINK1000 Blink when link is 1000 Mbit/s
++ 0x5 (0101b) LINK10_0 Blink when link is 10/1000 Mbit/s
++ 0x6 (0110b) LINK100X Blink when link is 100/1000 Mbit/s
++ 0x7 (0111b) LINK10XX Blink when link is 10/100/1000 Mbit/s
++ 0x8 (1000b) PDOWN Blink when device is powered-down
++ 0x9 (1001b) EEE Blink when device is in EEE mode
++ 0xA (1010b) ANEG Blink when auto-negotiation is running
++ 0xB (1011b) ABIST Blink when analog self-test is running
++ 0xC (1100b) CDIAG Blink when cable diagnostics are runningning
++
++PULSE 3:0 RW Pulsing Configuration
++ The pulse field is a mask field by which certain events can be combined
++ ---
++ 0x0 (0000b) NONE No pulsing
++ 0x1 (0001b) TXACT Transmit activity
++ 0x2 (0010b) RXACT Receive activity
++ 0x4 (0100b) COL Collision
++ 0x8 (1000b) RES Reserved
--
2.1.4
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list