[OpenWrt-Devel] [PATCH 0/7] kirkwood: revamp Linksys EA3500 & EA4500 support

[Imre Kaloz]

On Sat, 07 Nov 2015 03:29:07 +0100, Claudio Leite <leitec at staticky.com>  
wrote:

> This patch set reworks support for the Linksys EA3500 and EA4500,
> integrating significant amounts of code from the WRT1900AC port.
>
> Previously these two routers were supported by flashing from the
> bootloader and setting new boot commands. They can now be flashed
> from the Linksys factory firmware and upgraded from within OpenWrt.
> This also adds support for the Linksys dual-image firmware layout
> and recovery mechanism.
>
> These patches also transition from a single read-write UBIFS to
> squashfs on UBI + UBIFS overlay.
>

Care to send a v2 with my requested changes at [1] and [2]? You don't have  
to handle the old bindings/boardnames, as this will be the first time you  
can flash OpenWrt from the webinterface -- people with old images have to  
have console and flash back to factory and reinstall anyways..


Thanks,

Imre

[1] http://www.spinics.net/lists/arm-kernel/msg458158.html
[2] http://www.spinics.net/lists/arm-kernel/msg458159.html
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel