[OpenWrt-Devel] [PATCH 1/6] CC: ar71xx: add kernel support for EnGenius EPG5000.
John Crispin
blogic at openwrt.org
Sat Jul 25 10:34:38 EDT 2015
Hi
your patches cause a build failure on the mikrotik subtarget
please send a fix asap
LD init/built-in.o
arch/mips/built-in.o: In function `epg5000_get_mac':
/home/buildbot/slave-local/ar71xx_mikrotik/build/build_dir/target-mips_34kc_uClibc-0.9.33.2/linux-ar71xx_mikrotik/linux-3.18.18/arch/mips/ath79/mach-epg5000.c:128:
undefined reference to `ath79_nvram_parse_mac_addr'
make[4]: *** [vmlinux] Error 1
John
On 21/07/2015 17:09, Christian Beier wrote:
> Backport of r46047.
>
> Signed-off-by: Christian Beier <cb at shoutrlabs.com>
> ---
> target/linux/ar71xx/config-3.18 | 1 +
> .../ar71xx/files/arch/mips/ath79/mach-epg5000.c | 178 +++++++++++++++++++++
> .../718-MIPS-ath79-add-EPG5000-support.patch | 39 +++++
> 3 files changed, 218 insertions(+)
> create mode 100644 target/linux/ar71xx/files/arch/mips/ath79/mach-epg5000.c
> create mode 100644 target/linux/ar71xx/patches-3.18/718-MIPS-ath79-add-EPG5000-support.patch
>
> diff --git a/target/linux/ar71xx/config-3.18 b/target/linux/ar71xx/config-3.18
> index 05c98eb..17f33bd 100644
> --- a/target/linux/ar71xx/config-3.18
> +++ b/target/linux/ar71xx/config-3.18
> @@ -58,6 +58,7 @@ CONFIG_ATH79_MACH_EAP300V2=y
> CONFIG_ATH79_MACH_EAP7660D=y
> CONFIG_ATH79_MACH_EL_M150=y
> CONFIG_ATH79_MACH_EL_MINI=y
> +CONFIG_ATH79_MACH_EPG5000=y
> CONFIG_ATH79_MACH_ESR1750=y
> CONFIG_ATH79_MACH_ESR900=y
> CONFIG_ATH79_MACH_EW_DORIN=y
> diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-epg5000.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-epg5000.c
> new file mode 100644
> index 0000000..b049f5d
> --- /dev/null
> +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-epg5000.c
> @@ -0,0 +1,178 @@
> +/*
> + * EnGenius EPG5000 board support
> + *
> + * Copyright (c) 2014 Jon Suphammer <jon at suphammer.net>
> + * Copyright (c) 2015 Christian Beier <cb at shoutrlabs.com>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published
> + * by the Free Software Foundation.
> + */
> +
> +#include <linux/platform_device.h>
> +#include <linux/ar8216_platform.h>
> +
> +#include <asm/mach-ath79/ar71xx_regs.h>
> +
> +#include "common.h"
> +#include "pci.h"
> +#include "dev-ap9x-pci.h"
> +#include "dev-gpio-buttons.h"
> +#include "dev-eth.h"
> +#include "dev-leds-gpio.h"
> +#include "dev-m25p80.h"
> +#include "dev-usb.h"
> +#include "dev-wmac.h"
> +#include "machtypes.h"
> +#include "nvram.h"
> +
> +#define EPG5000_GPIO_LED_WLAN_5G 23
> +#define EPG5000_GPIO_LED_WLAN_2G 13
> +#define EPG5000_GPIO_LED_POWER_AMBER 2
> +#define EPG5000_GPIO_LED_WPS_AMBER 22
> +#define EPG5000_GPIO_LED_WPS_BLUE 19
> +
> +#define EPG5000_GPIO_BTN_WPS 16
> +#define EPG5000_GPIO_BTN_RESET 17
> +
> +#define EPG5000_KEYS_POLL_INTERVAL 20 /* msecs */
> +#define EPG5000_KEYS_DEBOUNCE_INTERVAL (3 * EPG5000_KEYS_POLL_INTERVAL)
> +
> +#define EPG5000_CALDATA_ADDR 0x1fff0000
> +#define EPG5000_WMAC_CALDATA_OFFSET 0x1000
> +#define EPG5000_PCIE_CALDATA_OFFSET 0x5000
> +
> +#define EPG5000_NVRAM_ADDR 0x1f030000
> +#define EPG5000_NVRAM_SIZE 0x10000
> +
> +static struct gpio_led epg5000_leds_gpio[] __initdata = {
> + {
> + .name = "epg5000:amber:power",
> + .gpio = EPG5000_GPIO_LED_POWER_AMBER,
> + .active_low = 1,
> + },
> + {
> + .name = "epg5000:blue:wps",
> + .gpio = EPG5000_GPIO_LED_WPS_BLUE,
> + .active_low = 1,
> + },
> + {
> + .name = "epg5000:amber:wps",
> + .gpio = EPG5000_GPIO_LED_WPS_AMBER,
> + .active_low = 1,
> + },
> + {
> + .name = "epg5000:blue:wlan-2g",
> + .gpio = EPG5000_GPIO_LED_WLAN_2G,
> + .active_low = 1,
> + },
> + {
> + .name = "epg5000:blue:wlan-5g",
> + .gpio = EPG5000_GPIO_LED_WLAN_5G,
> + .active_low = 1,
> + }
> +};
> +
> +static struct gpio_keys_button epg5000_gpio_keys[] __initdata = {
> + {
> + .desc = "WPS button",
> + .type = EV_KEY,
> + .code = KEY_WPS_BUTTON,
> + .debounce_interval = EPG5000_KEYS_DEBOUNCE_INTERVAL,
> + .gpio = EPG5000_GPIO_BTN_WPS,
> + .active_low = 1,
> + },
> + {
> + .desc = "Reset button",
> + .type = EV_KEY,
> + .code = KEY_RESTART,
> + .debounce_interval = EPG5000_KEYS_DEBOUNCE_INTERVAL,
> + .gpio = EPG5000_GPIO_BTN_RESET,
> + .active_low = 1,
> + },
> +};
> +
> +static struct ar8327_pad_cfg epg5000_ar8327_pad0_cfg = {
> + .mode = AR8327_PAD_MAC_RGMII,
> + .txclk_delay_en = true,
> + .rxclk_delay_en = true,
> + .txclk_delay_sel = AR8327_CLK_DELAY_SEL2,
> + .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
> + .mac06_exchange_en = true,
> +};
> +
> +static struct ar8327_platform_data epg5000_ar8327_data = {
> + .pad0_cfg = &epg5000_ar8327_pad0_cfg,
> + .port0_cfg = {
> + .force_link = 1,
> + .speed = AR8327_PORT_SPEED_1000,
> + .duplex = 1,
> + .txpause = 1,
> + .rxpause = 1,
> + },
> +};
> +
> +static struct mdio_board_info epg5000_mdio0_info[] = {
> + {
> + .bus_id = "ag71xx-mdio.0",
> + .phy_addr = 0,
> + .platform_data = &epg5000_ar8327_data,
> + },
> +};
> +
> +static int epg5000_get_mac(const char *name, char *mac)
> +{
> + u8 *nvram = (u8 *) KSEG1ADDR(EPG5000_NVRAM_ADDR);
> + int err;
> +
> + err = ath79_nvram_parse_mac_addr(nvram, EPG5000_NVRAM_SIZE,
> + name, mac);
> + if (err) {
> + pr_err("no MAC address found for %s\n", name);
> + return false;
> + }
> +
> + return true;
> +}
> +
> +static void __init epg5000_setup(void)
> +{
> + u8 *caldata = (u8 *) KSEG1ADDR(EPG5000_CALDATA_ADDR);
> + u8 mac1[ETH_ALEN];
> +
> + ath79_register_m25p80(NULL);
> +
> + ath79_register_leds_gpio(-1, ARRAY_SIZE(epg5000_leds_gpio),
> + epg5000_leds_gpio);
> + ath79_register_gpio_keys_polled(-1, EPG5000_KEYS_POLL_INTERVAL,
> + ARRAY_SIZE(epg5000_gpio_keys),
> + epg5000_gpio_keys);
> +
> + ath79_register_usb();
> +
> + ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
> +
> + ath79_register_mdio(0, 0x0);
> +
> + mdiobus_register_board_info(epg5000_mdio0_info,
> + ARRAY_SIZE(epg5000_mdio0_info));
> +
> + /* GMAC0 is connected to an QCA8327N switch */
> + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
> + ath79_eth0_data.phy_mask = BIT(0);
> + ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
> +
> + if (epg5000_get_mac("ethaddr=", mac1))
> + ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
> +
> + ath79_eth0_pll_data.pll_1000 = 0xa6000000;
> + ath79_register_eth(0);
> +
> + ath79_register_wmac(caldata + EPG5000_WMAC_CALDATA_OFFSET, mac1);
> +
> + ath79_register_pci();
> +}
> +
> +MIPS_MACHINE(ATH79_MACH_EPG5000, "EPG5000",
> + "EnGenius EPG5000",
> + epg5000_setup);
> diff --git a/target/linux/ar71xx/patches-3.18/718-MIPS-ath79-add-EPG5000-support.patch b/target/linux/ar71xx/patches-3.18/718-MIPS-ath79-add-EPG5000-support.patch
> new file mode 100644
> index 0000000..579e024
> --- /dev/null
> +++ b/target/linux/ar71xx/patches-3.18/718-MIPS-ath79-add-EPG5000-support.patch
> @@ -0,0 +1,39 @@
> +--- a/arch/mips/ath79/Kconfig
> ++++ b/arch/mips/ath79/Kconfig
> +@@ -196,6 +196,16 @@ config ATH79_MACH_F9K1115V2
> + select ATH79_DEV_USB
> + select ATH79_DEV_WMAC
> +
> ++config ATH79_MACH_EPG5000
> ++ bool "EnGenius EPG5000 board support"
> ++ select SOC_QCA955X
> ++ select ATH79_DEV_ETH
> ++ select ATH79_DEV_GPIO_BUTTONS
> ++ select ATH79_DEV_LEDS_GPIO
> ++ select ATH79_DEV_M25P80
> ++ select ATH79_DEV_USB
> ++ select ATH79_DEV_WMAC
> ++
> + config ATH79_MACH_ESR1750
> + bool "EnGenius ESR1750 board support"
> + select SOC_QCA955X
> +--- a/arch/mips/ath79/Makefile
> ++++ b/arch/mips/ath79/Makefile
> +@@ -69,6 +69,7 @@ obj-$(CONFIG_ATH79_MACH_EAP300V2) += mach-eap300v2.o
> + obj-$(CONFIG_ATH79_MACH_EAP7660D) += mach-eap7660d.o
> + obj-$(CONFIG_ATH79_MACH_EL_M150) += mach-el-m150.o
> + obj-$(CONFIG_ATH79_MACH_EL_MINI) += mach-el-mini.o
> ++obj-$(CONFIG_ATH79_MACH_EPG5000) += mach-epg5000.o
> + obj-$(CONFIG_ATH79_MACH_ESR1750) += mach-esr1750.o
> + obj-$(CONFIG_ATH79_MACH_F9K1115V2) += mach-f9k1115v2.o
> + obj-$(CONFIG_ATH79_MACH_GL_INET) += mach-gl-inet.o
> +--- a/arch/mips/ath79/machtypes.h
> ++++ b/arch/mips/ath79/machtypes.h
> +@@ -59,6 +59,7 @@ enum ath79_mach_type {
> + ATH79_MACH_EL_M150, /* EasyLink EL-M150 */
> + ATH79_MACH_EL_MINI, /* EasyLink EL-MINI */
> + ATH79_MACH_ESR1750, /* EnGenius ESR1750 */
> ++ ATH79_MACH_EPG5000, /* EnGenius EPG5000 */
> + ATH79_MACH_F9K1115V2, /* Belkin AC1750DB */
> + ATH79_MACH_GL_INET, /* GL-CONNECT GL-INET */
> + ATH79_MACH_GS_OOLITE, /* GS OOLITE V1.0 */
>
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list