[OpenWrt-Devel] [PATCH] ramips: add support for STORYLiNK SAP-G3200U3
Piotr Dymacz
pepe2k at gmail.com
Tue Jul 21 08:04:29 EDT 2015
STORYLiNK SAP-G3200U3 is an AC1200 router based on MT7621AT+MT7602EN+MT7612EN.
It has 128MB DDR3, 8MB NOR FLASH, 5-port Gbps switch and 1x USB 3.0.
The following patch adds support for this device.
Tested and working:
* ethernet
* both WiFi radios
* USB 3.0
* buttons
* ethernet switch and USB diag LEDs
* UART
* GPIOs
Tested and not working:
* LEDs for WiFi radios (connected with WiFi chips, not supported in mt76?)
* failsafe mode (known problem, needs workaround like other MTK based devices)
More information in Wiki: http://wiki.openwrt.org/toh/storylink/sap-g3200u3
Signed-off-by: Piotr Dymacz <pepe2k at gmail.com>
---
target/linux/ramips/base-files/etc/board.d/01_leds | 3 +
.../linux/ramips/base-files/etc/board.d/02_network | 1 +
target/linux/ramips/base-files/etc/diag.sh | 3 +
target/linux/ramips/base-files/lib/ramips.sh | 3 +
.../ramips/base-files/lib/upgrade/platform.sh | 1 +
target/linux/ramips/dts/SAP-G3200U3.dts | 122 +++++++++++++++++++++
target/linux/ramips/image/Makefile | 6 +-
target/linux/ramips/mt7621/profiles/sap-g3200u3.mk | 18 +++
8 files changed, 156 insertions(+), 1 deletion(-)
create mode 100644 target/linux/ramips/dts/SAP-G3200U3.dts
create mode 100644 target/linux/ramips/mt7621/profiles/sap-g3200u3.mk
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index 0672a22..c6bfd7e 100755
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -184,6 +184,9 @@ case $board in
ucidef_set_led_default "power" "power" "pbr-m1:green:power" "1"
ucidef_set_led_default "sys" "sys" "pbr-m1:green:sys" "1"
;;
+ sap-g3200u3)
+ set_usb_led "storylink:green:usb"
+ ;;
sl-r7205)
set_wifi_led "rt2800pci-phy0::radio"
;;
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index f896afa..da1854a 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -140,6 +140,7 @@ ramips_setup_interfaces()
whr-300hp2 | \
whr-600d | \
oy-0001 | \
+ sap-g3200u3 | \
wsr-600 | \
wsr-1166 | \
wt1520 | \
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index 319763e..e63f0df 100644
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -150,6 +150,9 @@ get_status_led() {
rut5xx)
status_led="rut5xx:green:status"
;;
+ sap-g3200u3)
+ status_led="storylink:green:usb"
+ ;;
sl-r7205)
status_led="sl-r7205:green:status"
;;
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index d7fd5f9..b0a4506 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -307,6 +307,9 @@ ramips_board_detect() {
*"Sparklan WCR-150GN")
name="wcr-150gn"
;;
+ *"STORYLiNK SAP-G3200U3")
+ name="sap-g3200u3"
+ ;;
*"V22RW-2X2")
name="v22rw-2x2"
;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index 04af322..8221997 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -90,6 +90,7 @@ platform_check_image() {
rt-n15 | \
rt-n56u | \
rut5xx | \
+ sap-g3200u3 | \
sl-r7205 | \
tew-691gr | \
tew-692gr | \
diff --git a/target/linux/ramips/dts/SAP-G3200U3.dts b/target/linux/ramips/dts/SAP-G3200U3.dts
new file mode 100644
index 0000000..06c2f23
--- /dev/null
+++ b/target/linux/ramips/dts/SAP-G3200U3.dts
@@ -0,0 +1,122 @@
+/dts-v1/;
+
+/include/ "mt7621.dtsi"
+
+/ {
+ compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
+ model = "STORYLiNK SAP-G3200U3";
+
+ memory at 0 {
+ device_type = "memory";
+ reg = <0x0 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,57600";
+ };
+
+ palmbus at 1E000000 {
+ spi at b00 {
+ status = "okay";
+
+ m25p80 at 0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "mx25l6405d";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "en25q64";
+ spi-max-frequency = <10000000>;
+
+ partition at 0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition at 30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x1000>;
+ read-only;
+ };
+
+ partition at 31000 {
+ label = "config";
+ reg = <0x31000 0xf000>;
+ read-only;
+ };
+
+ factory: partition at 40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition at 50000 {
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+ };
+ };
+
+ pcie at 1e140000 {
+ status = "okay";
+
+ pcie0 {
+ mt76 at 0,0 {
+ reg = <0x0000 0 0 0 0>;
+ device_type = "pci";
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ mediatek,2ghz = <0>;
+ };
+ };
+
+ pcie1 {
+ mt76 at 1,0 {
+ reg = <0x0000 0 0 0 0>;
+ device_type = "pci";
+ mediatek,mtd-eeprom = <&factory 0x0000>;
+ mediatek,5ghz = <0>;
+ };
+ };
+ };
+
+ ethernet at 1e100000 {
+ mtd-mac-address = <&factory 0xe006>;
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ usb {
+ label = "storylink:green:usb";
+ gpios = <&gpio0 13 1>;
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+ reset {
+ label = "reset";
+ gpios = <&gpio0 16 1>;
+ linux,code = <0x198>;
+ };
+ rfkill {
+ label = "rfkill";
+ gpios = <&gpio0 14 1>;
+ linux,code = <0xf7>;
+ };
+ };
+
+ pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "uart3", "jtag";
+ ralink,function = "gpio";
+ };
+ };
+ };
+};
diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index b71d935..46307ec 100644
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -926,7 +926,7 @@ endif
#
ifeq ($(SUBTARGET),mt7621)
- TARGET_DEVICES += mt7621 wsr-600 wsr-1166 dir-860l-b1 firewrt pbr-m1 re6500
+ TARGET_DEVICES += mt7621 wsr-600 wsr-1166 dir-860l-b1 firewrt pbr-m1 re6500 sap-g3200u3
endif
define Device/mt7621
@@ -972,6 +972,10 @@ define Device/pbr-m1
IMAGE_SIZE := $(ralink_default_fw_size_16M)
endef
+define Device/sap-g3200u3
+ DTS := SAP-G3200U3
+endef
+
#
# MT7628 Profiles
#
diff --git a/target/linux/ramips/mt7621/profiles/sap-g3200u3.mk b/target/linux/ramips/mt7621/profiles/sap-g3200u3.mk
new file mode 100644
index 0000000..9ca4a2f
--- /dev/null
+++ b/target/linux/ramips/mt7621/profiles/sap-g3200u3.mk
@@ -0,0 +1,18 @@
+#
+# Copyright (C) 2015 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/SAP-G3200U3
+ NAME:=STORYLiNK SAP-G3200U3
+ PACKAGES:=\
+ kmod-usb-core kmod-usb3 kmod-usb-hid \
+ kmod-ledtrig-usbdev
+endef
+
+define Profile/SAP-G3200U3/Description
+ Package set compatible with the STORYLiNK SAP-G3200U3 board.
+endef
+$(eval $(call Profile,SAP-G3200U3))
--
2.4.6
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list