[OpenWrt-Devel] ath10k fails to load firmware in r46386 on ESR1750

Christian Beier cb at shoutrlabs.com
Fri Jul 17 09:34:42 EDT 2015


Hi list!

On an EnGenius ESR1750 running current trunk (r46386), the ath10k driver fails
to load the firmware blob - it did work in Barrier Breaker though. Here's the
failing dmesg bits:

---snip---
[   72.050000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[   72.060000] ath10k_pci 0000:00:00.0: pci irq legacy interrupts 0 irq_mode 0 reset_mode 0
[   72.280000] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/cal-pci-0000:00:00.0.bin failed with error -2
[   72.290000] ath10k_pci 0000:00:00.0: Falling back to user helper
[   72.360000] firmware ath10k!cal-pci-0000:00:00.0.bin: firmware_loading_store: map pages failed
[   72.460000] ath10k_pci 0000:00:00.0: otp calibration failed: 2
[   72.470000] ath10k_pci 0000:00:00.0: failed to run otp: -22
[   72.470000] ath10k_pci 0000:00:00.0: could not init core (-22)
[   72.480000] ath10k_pci 0000:00:00.0: could not probe fw (-22)
---snap---


Barrier Breaker dmesg instead:
---snip---
[   12.440000] ath10k_pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x101fffff 64bit]
[   12.450000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[   12.750000] ath10k: pci irq legacy irq_mode 0 reset_mode 0
[   13.160000] ath10k: otp stream is empty, using board.bin contents
[   14.120000] ath10k: qca988x hw2.0 (0x4100016c, 0x043202ff) fw 10.1.467.3-1 api 2 htt 2.1
---snap---

Any hints on this?

Thanks,
-- 
Christian Beier, CTO.

W 	shoutrlabs.com
E 	cb at shoutrlabs.com
L 	https://www.linkedin.com/in/christianbeier
P 	+49 (0)30 12076581
T 	https://twitter.com/shoutrlabs

what is, is; what is not is possible.

shoutr labs UG (haftungsbeschränkt), 
Wolfener Straße 32-34, Haus K, CleanTech Innovation Center, 12681 Berlin
HRB 154532 B, AG Charlottenburg
Managing directors: Christian Beier, Benjamin Werner, Sebastian Winkler
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel


More information about the openwrt-devel mailing list