[OpenWrt-Devel] Hard float ABI for BCM2708/BCM2709

[Florian Fainelli]

Le 11 juil. 2015 09:52, "Matthias Schiffer" <mschiffer at universe-factory.net>
a écrit :
>
> Hi,
> I've noticed that OpenWrt currently uses the soft-float ABI in the
> Raspberry Pi images. Is there a specific reason hard float is not used,
> even though most other distributions like Raspbian have switched to it?

I do not think there was any particular reason. This was one of the few
ARM-based targets that are not armv5, however armv5 may have been used as a
template to kick the initial port.

>
> I tried adding "fpu" to FEATURES to enable hard-float, and the generated
> images seem to work fine.

If you want to submit a patch doing this, I will gladly apply it, we may
have to set a different FPU ABI between brcm2708 and 09 though.
--
Florian
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20150711/334ba10c/attachment.htm>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel