[OpenWrt-Devel] [PATCH 2/3] ar71xx: add support for the Giga Device spi nand chips
John Crispin
blogic at openwrt.org
Fri Jul 10 04:31:35 EDT 2015
Hi,
can you first send this patch upstream please ?
John
On 10/07/2015 09:18, miaoqing at qti.qualcomm.com wrote:
> From: Miaoqing Pan <miaoqing at codeaurora.org>
>
> Signed-off-by: Miaoqing Pan <miaoqing at codeaurora.org>
> ---
> ...PS-ath79-add-giga-device-spi-nand-support.patch | 40 ++++++++++++++++++++++
> 1 file changed, 40 insertions(+)
> create mode 100644 target/linux/ar71xx/patches-3.18/916-MIPS-ath79-add-giga-device-spi-nand-support.patch
>
> diff --git a/target/linux/ar71xx/patches-3.18/916-MIPS-ath79-add-giga-device-spi-nand-support.patch b/target/linux/ar71xx/patches-3.18/916-MIPS-ath79-add-giga-device-spi-nand-support.patch
> new file mode 100644
> index 0000000..ff366cc
> --- /dev/null
> +++ b/target/linux/ar71xx/patches-3.18/916-MIPS-ath79-add-giga-device-spi-nand-support.patch
> @@ -0,0 +1,40 @@
> +--- a/drivers/mtd/nand/nand_ids.c
> ++++ b/drivers/mtd/nand/nand_ids.c
> +@@ -51,6 +51,19 @@ struct nand_flash_dev nand_flash_ids[] = {
> + SZ_8K, SZ_8K, SZ_2M, 0, 6, 640, NAND_ECC_INFO(40, SZ_1K),
> + 4 },
> +
> ++ {"GD5F1GQ4U 1G 3.3V 8-bit",
> ++ { .id = {0xc8, 0xb1} },
> ++ SZ_2K, SZ_128, SZ_128K, 0, 2, 128, NAND_ECC_INFO(4, SZ_512) },
> ++ {"GD5F2GQ4U 2G 3.3V 8-bit",
> ++ { .id = {0xc8, 0xb2} },
> ++ SZ_2K, SZ_256, SZ_128K, 0, 2, 128, NAND_ECC_INFO(4, SZ_512) },
> ++ {"GD5F1GQ4R 1G 1.8V 8-bit",
> ++ { .id = {0xc8, 0xa1} },
> ++ SZ_2K, SZ_128, SZ_128K, 0, 2, 128, NAND_ECC_INFO(4, SZ_512) },
> ++ {"GD5F2GQ4R 2G 1.8V 8-bit",
> ++ { .id = {0xc8, 0xa2} },
> ++ SZ_2K, SZ_256, SZ_128K, 0, 2, 128, NAND_ECC_INFO(4, SZ_512) },
> ++
> + LEGACY_ID_NAND("NAND 4MiB 5V 8-bit", 0x6B, 4, SZ_8K, SP_OPTIONS),
> + LEGACY_ID_NAND("NAND 4MiB 3,3V 8-bit", 0xE3, 4, SZ_8K, SP_OPTIONS),
> + LEGACY_ID_NAND("NAND 4MiB 3,3V 8-bit", 0xE5, 4, SZ_8K, SP_OPTIONS),
> +@@ -178,6 +191,7 @@ struct nand_manufacturers nand_manuf_ids[] = {
> + {NAND_MFR_EON, "Eon"},
> + {NAND_MFR_SANDISK, "SanDisk"},
> + {NAND_MFR_INTEL, "Intel"},
> ++ {NAND_MFR_GIGADEVICE, "Giga Device"},
> + {0x0, "Unknown"}
> + };
> +
> +--- a/include/linux/mtd/nand.h
> ++++ b/include/linux/mtd/nand.h
> +@@ -720,6 +720,7 @@ struct nand_chip {
> + #define NAND_MFR_MICRON 0x2c
> + #define NAND_MFR_AMD 0x01
> + #define NAND_MFR_MACRONIX 0xc2
> ++#define NAND_MFR_GIGADEVICE 0xc8
> + #define NAND_MFR_EON 0x92
> + #define NAND_MFR_SANDISK 0x45
> + #define NAND_MFR_INTEL 0x89
>
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list