[OpenWrt-Devel] [PATCH v3 1/7] ar71xx: ag71xx: add pdata field supported

[John Crispin]

On 09/07/2015 09:42, Guenther Kelleter wrote:
> Hi
> 
>> -----Original Message-----
>> From: John Crispin [mailto:blogic at openwrt.org]
>> Sent: Thursday, July 09, 2015 8:24 AM
>> To: Guenther Kelleter; openwrt-devel at lists.openwrt.org
>> Subject: Re: [OpenWrt-Devel] [PATCH v3 1/7] ar71xx: ag71xx: add pdata field
>> supported
>>
>> Hi,
>>
>> On 07/07/2015 14:58, Günther Kelleter wrote:
>>> to allow target specific override of phydev->supported.
>>>
>>
>> why do you need to do this ? do you want to force a specific link type ?
>> if so, then using a fixed link would be preferable to faking phy caps
> 
> 
> It simply doesn't work with autoneg on. The plc chip on the other end of eth0 doesn't sync. How can I force no autoneg 1000 full duplex on eth0 without this patch?
> I'm setting (see patch 3/7, target/linux/ar71xx/files/arch/mips/ath79/mach-dlan-pro-500-wp.c)
> +	ath79_eth0_data.speed = SPEED_1000;
> +	ath79_eth0_data.duplex = DUPLEX_FULL;
> But this has no effect.
> 
> 

ok, it looked something like this. gimme a day to figure out why
explicitly setting up the speed does not work.
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel