[OpenWrt-Devel] [PATCH v3 2/7] ath79: dev-eth: initialize clock for id 0 on AR934X

[Günther Kelleter]

Signed-off-by: Günther Kelleter <guenther.kelleter at devolo.de>
---
 target/linux/ar71xx/files/arch/mips/ath79/dev-eth.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/target/linux/ar71xx/files/arch/mips/ath79/dev-eth.c b/target/linux/ar71xx/files/arch/mips/ath79/dev-eth.c
index ff94e2e..c7524be 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/dev-eth.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/dev-eth.c
@@ -251,9 +251,11 @@ void __init ath79_register_mdio(unsigned int id, u32 phy_mask)
 	case ATH79_SOC_AR9344:
 		if (id == 1) {
 			mdio_data->builtin_switch = 1;
-			mdio_data->ref_clock = ar934x_get_mdio_ref_clock();
-			mdio_data->mdio_clock = 6250000;
+		} else {
+			mdio_data->builtin_switch = 0;
 		}
+		mdio_data->ref_clock = ar934x_get_mdio_ref_clock();
+		mdio_data->mdio_clock = 6250000;
 		mdio_data->is_ar934x = 1;
 		break;
 
-- 
2.4.4.88.gac2ab0d
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel