[OpenWrt-Devel] [PATCH 2/2] mvebu: undo LA bit on WRT1900ACv1 WAN MAC address

[Claudio Leite]

This had been set in r44508 as a workaround for switch
problems.

Now that the switch driver can handle two devices with
the same MAC address in separate VLANs we can go back
to using the same address on both interfaces.

This is the Linksys firmware's default behavior.

Signed-off-by: Claudio Leite <leitec at staticky.com>
---
 target/linux/mvebu/base-files/lib/preinit/06_set_iface_mac | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/target/linux/mvebu/base-files/lib/preinit/06_set_iface_mac b/target/linux/mvebu/base-files/lib/preinit/06_set_iface_mac
index 7217e93..9fc8d9a 100644
--- a/target/linux/mvebu/base-files/lib/preinit/06_set_iface_mac
+++ b/target/linux/mvebu/base-files/lib/preinit/06_set_iface_mac
@@ -11,9 +11,8 @@ preinit_set_mac_address() {
 	case $(mvebu_board_name) in
 	armada-xp-linksys-mamba)
 		mac=$(mtd_get_mac_ascii devinfo hw_mac_addr)
-		mac_wan=$(macaddr_setbit_la "$mac")
 		ifconfig eth0 hw ether $mac 2>/dev/null
-		ifconfig eth1 hw ether $mac_wan 2>/dev/null
+		ifconfig eth1 hw ether $mac 2>/dev/null
 		;;
 	armada-385-linksys-caiman|armada-385-linksys-cobra)
 		mac=$(mtd_get_mac_ascii devinfo hw_mac_addr)
-- 
2.1.4
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel