[OpenWrt-Devel] IPtables/NAT

[Alpha Sparc]

Hi

Any changes required to QSDK to compile successfully?
 On Jul 6, 2015 11:21 AM, "John kerry" <kerry9842 at gmail.com> wrote:

> Hi ,
>
> Hope you are doing great. I am working on Atheros QSDK. i am able to
> compile the source code successfully and able to upgrade the firmware using
> openWRT Luci GUI too. The OpenWRT being a linux distro for embedded
> platform already has IPtables implemented. Before compiling the source code
> i have to do a make menuconfig and enable the netfilter module in
> networking. This would enable IPtables and compile it. Is my undersatnding
> correct?
>
> Could you please guide me to write the Iptables rule. Basically i have to
> write the rules for iptables/NAT for the following condition.
> Router mode with NAT and iptables, the web page access to be available
> only to LAN (WiFi/Wired).
> I have one LAN and one WAN Connection, the LAN ip set to some static IP to
> access the GUI.
>
> Thanks & Regards,
> John
>
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20150706/00cd97cf/attachment.htm>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel