[OpenWrt-Devel] asking for help about mt7620 restarting

[Pan, Miaoqing]

Most SOCs don't support 4 bytes in boot stage.  Try extended address mode,

https://www.codeaurora.org/cgit/quic/qsdk/oss/boot/u-boot-1.1.4/commit/?h=release/coconut_ioe4531_2.0&id=2c537127056384523e92a43bf645f34a26696a39
https://www.codeaurora.org/cgit/quic/qsdk/oss/system/openwrt/commit/?h=release/coconut_ioe4531_2.0&id=9c00e9bc34dbb89812bc87bc1047849d1245bfb2

Miaoqing

From: openwrt-devel [mailto:openwrt-devel-bounces at lists.openwrt.org] On Behalf Of ldy647
Sent: Friday, July 03, 2015 11:45 AM
To: openwrt-devel at lists.openwrt.org
Subject: [OpenWrt-Devel] asking for help about mt7620 restarting

Dear sir/Madam,

recently, when we install our wireless router, we found when we run the reboot command, the board couldn't restart.  We hope you could lend us a hand to solve this problem. We'll be quite grateful for what you do for us.

By the way, our board is MT7620 equipped with 32M  spi flash, and works under  Openwrt trunk. We have set w25q256 in dts. Every other command works fine except reboot. Some people said it may be about the switch of spi flash between 3 byte and 4 byte.  Could you tell us how to solve this problem or a fixed padding? We'll be quite grateful. Thanks.

Looking forward to your reply as soon as possible.

Your Sincerely
Anna
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20150703/27687423/attachment.htm>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel