[OpenWrt-Devel] gpio-ralink, no interrupt GPIO pin?

[Baptiste Clenet]

Hi,

I was trying to set an interrupt pin for my transceiver in the .dts
and after some research, I had a look at gpio-ralink.c and found that
the registers for interrupt GPIO are not used. (GINT_REDGE,
GINT_FEDGE, GINT_HLVL ... for Ralink MT7628)

How may I set a GPIO pin as an interrupt then?

Regards,

-- 
Baptiste
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel