[OpenWrt-Devel] [PATCH netifd] bridge: allow enabling or disabling the multicast querier independently of IGMP snooping
John Crispin
blogic at openwrt.org
Wed Jan 28 05:54:07 EST 2015
Hi,
On 27/01/2015 03:49, Matthias Schiffer wrote:
> In larger networks, especially big batman-adv meshes, it may be desirable to
> enable IGMP snooping on every bridge without enabling the multicast querier
> to specifically put the querier on a well-connected node.
>
> This patch adds a new UCI option 'multicast_querier' for bridges which allows
> this. The default is still the value of the 'igmp_snooping' option to maintain
> backwards compatiblity.
>
per-se a good patch but its not reentrant
> Signed-off-by: Matthias Schiffer <mschiffer at universe-factory.net>
> ---
> bridge.c | 8 +++++++-
> system-linux.c | 2 +-
> system.h | 1 +
> 3 files changed, 9 insertions(+), 2 deletions(-)
>
> diff --git a/bridge.c b/bridge.c
> index f8478ad..f7dbf61 100644
> --- a/bridge.c
> +++ b/bridge.c
> @@ -32,6 +32,7 @@ enum {
> BRIDGE_ATTR_HELLO_TIME,
> BRIDGE_ATTR_MAX_AGE,
> BRIDGE_ATTR_BRIDGE_EMPTY,
> + BRIDGE_ATTR_MULTICAST_QUERIER,
> __BRIDGE_ATTR_MAX
> };
>
> @@ -45,6 +46,7 @@ static const struct blobmsg_policy bridge_attrs[__BRIDGE_ATTR_MAX] = {
> [BRIDGE_ATTR_MAX_AGE] = { "max_age", BLOBMSG_TYPE_INT32 },
> [BRIDGE_ATTR_IGMP_SNOOP] = { "igmp_snooping", BLOBMSG_TYPE_BOOL },
> [BRIDGE_ATTR_BRIDGE_EMPTY] = { "bridge_empty", BLOBMSG_TYPE_BOOL },
> + [BRIDGE_ATTR_MULTICAST_QUERIER] = { "multicast_querier", BLOBMSG_TYPE_BOOL },
> };
>
> static const struct uci_blob_param_info bridge_attr_info[__BRIDGE_ATTR_MAX] = {
> @@ -547,6 +549,7 @@ bridge_apply_settings(struct bridge_state *bst, struct blob_attr **tb)
> cfg->stp = false;
> cfg->forward_delay = 2;
> cfg->igmp_snoop = true;
> + cfg->multicast_querier = true;
> cfg->bridge_empty = false;
> cfg->priority = 0x7FFF;
>
> @@ -560,7 +563,10 @@ bridge_apply_settings(struct bridge_state *bst, struct blob_attr **tb)
> cfg->priority = blobmsg_get_u32(cur);
>
> if ((cur = tb[BRIDGE_ATTR_IGMP_SNOOP]))
> - cfg->igmp_snoop = blobmsg_get_bool(cur);
> + cfg->multicast_querier = cfg->igmp_snoop = blobmsg_get_bool(cur);
i make 1 ubus call and set multicast_querier=0 and then a 2nd call and
set igmp_snoop=1 this will break my prior call.
dont change the above line and then ....
> +
> + if ((cur = tb[BRIDGE_ATTR_MULTICAST_QUERIER]))
> + cfg->multicast_querier = blobmsg_get_bool(cur);
>
> if ((cur = tb[BRIDGE_ATTR_AGEING_TIME])) {
> cfg->ageing_time = blobmsg_get_u32(cur);
> diff --git a/system-linux.c b/system-linux.c
> index 4737fa6..ef90880 100644
> --- a/system-linux.c
> +++ b/system-linux.c
> @@ -772,7 +772,7 @@ int system_bridge_addbr(struct device *bridge, struct bridge_config *cfg)
> bridge->ifname, cfg->igmp_snoop ? "1" : "0");
>
> system_set_dev_sysctl("/sys/devices/virtual/net/%s/bridge/multicast_querier",
> - bridge->ifname, cfg->igmp_snoop ? "1" : "0");
> + bridge->ifname, cfg->multicast_querier ? "1" : "0");
>
change this to
bridge->ifname, (cfg->igmp_snoop & cfg->multicast_querier) ? "1" : "0");
this should not break anything with multiple ubus calls. the default
behavior also wont change as we set cfg->multicast_querier = true;
Please make those changes to the patch and resend it.
> args[0] = BRCTL_SET_BRIDGE_PRIORITY;
> args[1] = cfg->priority;
> diff --git a/system.h b/system.h
> index 9a2326b..94e0dd9 100644
> --- a/system.h
> +++ b/system.h
> @@ -50,6 +50,7 @@ struct bridge_config {
> enum bridge_opt flags;
> bool stp;
> bool igmp_snoop;
> + bool multicast_querier;
> unsigned short priority;
> int forward_delay;
> bool bridge_empty;
>
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list