[OpenWrt-Devel] ar8216: phy_init and bug report 18415

[Heiner Kallweit]

"I can plug an old 100mbit laptop into it and also have it not show up."
You connect the laptop with the router or the modem?
Does it work if you boot with the modem unplugged in and plug it in later?

If it worked with a previous version of the driver then you could use "git bisect" to find out which change actually introduced
the problem.

Heiner


Am 26.01.2015 um 02:01 schrieb Weedy:
> On Jan 25, 2015 1:06 PM, "Heiner Kallweit" <hkallweit1 at gmail.com <mailto:hkallweit1 at gmail.com>> wrote:
>>
>> To me it doesn't look like an issue with the AR8216 driver. All related output is ok.
>> The hardware is quite common and in case of a driver issue I would expect much more
>> people to complain.
>>
>> What looks a little strange to me is that there seem to be two interfaces (modem + wan)
>> fiddling with eth0.2
>>
>> Heiner
> 
> It's an alias.
> 
> My modem is 100mbit. I can plug and old 100mbit laptop into it and also have it not show up. It rebooted with the modem plugged in and port 1 didn't come up until I used a gigabit switch.
> 
> Auto-neg is broken. Tomorrow I'll do a new checkout just to be sure. Any commands you want me to run (switchcfg?) to show you the port status?
> 
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel