[OpenWrt-Devel] [PATCH] ramips: add support for Tenda 3G150B
Cezary Jackiewicz
cezary.jackiewicz at gmail.com
Tue Jan 20 12:13:03 EST 2015
Add suport for Tenda 3G150B:
- cpu: Ralink RT5350F
- flash: 4MB
- ram: 32MB
- 1x USB 2.0
- 1x RJ45
- one reset button
- battery powered (BP-4L, 3.7V 1450mAh)
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz at gmail.com>
---
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index 8695cde..af3dddc 100755
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -24,6 +24,7 @@ case $board in
3g-6200nl)
set_wifi_led "edimax:green:wlan"
;;
+ 3g150b |\
3g300m)
set_usb_led "tenda:blue:3g"
;;
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index b440fb3..fd5a170 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -43,6 +43,7 @@ ramips_setup_interfaces()
ucidef_add_switch_vlan "switch0" "1" "0 6t"
;;
+ 3g150b | \
3g300m | \
w150m | \
all0256n | \
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index 1693e9d..808177b 100755
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -9,7 +9,7 @@ get_status_led() {
3g-6200n)
status_led="edimax:green:power"
;;
- 3g300m | w150m)
+ 3g150b | 3g300m | w150m)
status_led="tenda:blue:ap"
;;
ai-br100)
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index 720b137..61dc734 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -313,6 +313,9 @@ ramips_board_detect() {
*"Tenda 3G300M")
name="3g300m"
;;
+ *"Tenda 3G150B")
+ name="3g150b"
+ ;;
*"Tenda W306R V2.0")
name="w306r-v20"
;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index 7c17211..24c79d9 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -16,6 +16,7 @@ platform_check_image() {
case "$board" in
3g-6200n | \
3g-6200nl | \
+ 3g150b | \
3g300m | \
a5-v11 | \
air3gii | \
diff --git a/target/linux/ramips/dts/3G150B.dts b/target/linux/ramips/dts/3G150B.dts
new file mode 100644
index 0000000..bdcca71
--- /dev/null
+++ b/target/linux/ramips/dts/3G150B.dts
@@ -0,0 +1,114 @@
+/dts-v1/;
+
+/include/ "rt5350.dtsi"
+
+/ {
+ compatible = "3G150B", "ralink,rt5350-soc";
+ model = "Tenda 3G150B";
+
+ palmbus at 10000000 {
+ spi at b00 {
+ status = "okay";
+ m25p80 at 0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "s25fl064k";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "s25fl064k";
+ spi-max-frequency = <10000000>;
+
+ partition at 0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition at 30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition at 40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition at 50000 {
+ label = "firmware";
+ reg = <0x50000 0x3b0000>;
+ };
+ };
+ };
+ gpio1: gpio at 660 {
+ status = "okay";
+ };
+ };
+
+ pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf", "led";
+ ralink,function = "gpio";
+ };
+ };
+ };
+
+ ethernet at 10100000 {
+ mtd-mac-address = <&factory 0x4>;
+ };
+
+ esw at 10110000 {
+ ralink,portmap = <0x2f>;
+ };
+
+ wmac at 10180000 {
+ ralink,mtd-eeprom = <&factory 0>;
+ ralink,led-polarity = <1>;
+ };
+
+ ehci at 101c0000 {
+ status = "okay";
+ };
+
+ ohci at 101c1000 {
+ status = "okay";
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ ap {
+ label = "tenda:blue:ap";
+ gpios = <&gpio0 7 1>;
+ };
+ 3g {
+ label = "tenda:blue:3g";
+ gpios = <&gpio0 14 1>;
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+ reset {
+ label = "reset";
+ gpios = <&gpio0 0 1>;
+ linux,code = <0x198>;
+ };
+ };
+
+ gpio_export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ usb {
+ gpio-export,name = "usb";
+ gpio-export,output = <1>;
+ gpios = <&gpio0 13 0>;
+ };
+ };
+
+};
diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index f935a95..908ff2c 100644
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -549,6 +549,8 @@ Image/Build/Profile/M4=$(call BuildFirmware/PorayDualSize/$(1),$(1),m4,M4)
Image/Build/Profile/MOFI3500-3GN=$(call BuildFirmware/Default8M/$(1),$(1),mofi3500-3gn,MOFI3500-3GN)
# Kernel name should be "Linux Kernel Image" to make the OpenWrt image installable from factory Web UI
+Image/Build/Profile/3G150B=$(call BuildFirmware/Default4M/$(1),$(1),3g150b,3G150B,Linux Kernel Image)
+
Image/Build/Profile/MPRA1=$(call BuildFirmware/Default4M/$(1),$(1),mpr-a1,MPRA1,Linux Kernel Image)
Image/Build/Profile/MPRA2=$(call BuildFirmware/Default8M/$(1),$(1),mpr-a2,MPRA2,Linux Kernel Image)
@@ -676,6 +678,7 @@ ifeq ($(SUBTARGET),rt305x)
define Image/Build/Profile/Default
$(call Image/Build/Profile/3G6200N,$(1))
$(call Image/Build/Profile/3G6200NL,$(1))
+ $(call Image/Build/Profile/3G150B,$(1))
$(call Image/Build/Profile/3G300M,$(1))
$(call Image/Build/Profile/A5-11,$(1))
$(call Image/Build/Profile/AIR3GII,$(1))
diff --git a/target/linux/ramips/rt305x/profiles/tenda.mk b/target/linux/ramips/rt305x/profiles/tenda.mk
index d9d94cf..36ba822 100644
--- a/target/linux/ramips/rt305x/profiles/tenda.mk
+++ b/target/linux/ramips/rt305x/profiles/tenda.mk
@@ -5,6 +5,19 @@
# See /LICENSE for more information.
#
+define Profile/3G150B
+ NAME:=Tenda 3G150B
+ PACKAGES:=\
+ kmod-usb-core kmod-usb-dwc2 \
+ kmod-ledtrig-usbdev
+endef
+
+define Profile/3G150B/Description
+ Package set for Tenda 3G150B board
+endef
+
+$(eval $(call Profile,3G150B))
+
define Profile/3G300M
NAME:=Tenda 3G300M
PACKAGES:=\
--
Pozdrawiam,
Cezary Jackiewicz
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list