[OpenWrt-Devel] [PATCH] [ar71xx] Add support for MERCURY MAC1200R
郭传鈜
gch981213 at gmail.com
Thu Jan 15 00:28:06 EST 2015
2015-01-11 19:48 GMT+08:00 <openwrt at rogerpueyo.com>:
> From: Roger Pueyo Centelles <roger.pueyo at guifi.net>
>
> ---
> target/linux/ar71xx/base-files/etc/diag.sh | 3 +
> .../ar71xx/base-files/etc/uci-defaults/01_leds | 5 +
> .../ar71xx/base-files/etc/uci-defaults/02_network | 1 +
> target/linux/ar71xx/base-files/lib/ar71xx.sh | 6 +
> .../ar71xx/base-files/lib/upgrade/platform.sh | 1 +
> target/linux/ar71xx/config-3.14 | 1 +
> .../files/arch/mips/ath79/mach-mc-mac1200r.c | 157
+++++++++++++++++++++
> target/linux/ar71xx/generic/profiles/mercury.mk | 17 +++
> target/linux/ar71xx/image/Makefile | 1 +
> .../736-MIPS-ath79-add-MC-MAC1200R-support.patch | 39 +++++
> 10 files changed, 231 insertions(+)
> create mode 100644
target/linux/ar71xx/files/arch/mips/ath79/mach-mc-mac1200r.c
> create mode 100644 target/linux/ar71xx/generic/profiles/mercury.mk
> create mode 100644
target/linux/ar71xx/patches-3.14/736-MIPS-ath79-add-MC-MAC1200R-support.patch
>
> diff --git a/target/linux/ar71xx/base-files/etc/diag.sh
b/target/linux/ar71xx/base-files/etc/diag.sh
> index 06b96a3..388727f 100755
> --- a/target/linux/ar71xx/base-files/etc/diag.sh
> +++ b/target/linux/ar71xx/base-files/etc/diag.sh
> @@ -105,6 +105,9 @@ get_status_led() {
> ls-sr71)
> status_led="ubnt:green:d22"
> ;;
> + mc-mac1200r)
> + status_led="mercury:green:system"
> + ;;
> mr600)
> status_led="mr600:orange:power"
> ;;
> diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
> index 296ea57..dc5dfa1 100755
> --- a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
> +++ b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
> @@ -166,6 +166,11 @@ hornet-ub)
> ucidef_set_led_usbdev "usb" "USB" "alfa:blue:usb" "1-1"
> ;;
>
> +mc-mac1200r)
> + ucidef_set_led_wlan "wlan2g" "WLAN2G" "mercury:green:wlan2g"
"phy1tpt"
I think the following line is incorrect:
> + ucidef_set_led_wlan "wlan5g" "WLAN5G" "mercury:green:wlan5g"
"phy0tpt"
There is no LED trigger called 'phy0tpt' so I think we should use netdev
trigger like this:
ucidef_set_led_netdev "wlan5g" "WLAN5G" "mercury:green:wlan5g" "wlan0"
> + ;;
> +
> mr600)
> ucidef_set_led_wlan "wlan58" "WLAN58" "mr600:green:wlan58"
"phy0tpt"
> ;;
> diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
> index b4b6cb3..8151470 100755
> --- a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
> +++ b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
> @@ -367,6 +367,7 @@ dir-615-e1 |\
> dir-615-e4 |\
> hiwifi-hc6361 |\
> ja76pf |\
> +mc-mac1200r|\
> mynet-n600 |\
> oolite |\
> qihoo-c301 |\
> diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh
b/target/linux/ar71xx/base-files/lib/ar71xx.sh
> index 9b056e9..3ce63aa 100755
> --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
> +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
> @@ -97,6 +97,9 @@ tplink_board_detect() {
> "015300"*)
> model="EasyLink EL-MINI"
> ;;
> + "120000"*)
> + model="MERCURY MAC1200R"
> + ;;
> "3C0001"*)
> model="OOLITE"
> ;;
> @@ -432,6 +435,9 @@ ar71xx_board_detect() {
> *LS-SR71)
> name="ls-sr71"
> ;;
> + *"MAC1200R")
> + name="mc-mac1200r"
> + ;;
> *MR600v2)
> name="mr600v2"
> ;;
> diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
> index 6dabf4e..7153614 100755
> --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
> +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
> @@ -297,6 +297,7 @@ platform_check_image() {
> el-m150 | \
> el-mini | \
> gl-inet | \
> + mc-mac1200r | \
> oolite | \
> smart-300 | \
> tl-mr10u | \
> diff --git a/target/linux/ar71xx/config-3.14
b/target/linux/ar71xx/config-3.14
> index b6fa4ab..a99c082 100644
> --- a/target/linux/ar71xx/config-3.14
> +++ b/target/linux/ar71xx/config-3.14
> @@ -64,6 +64,7 @@ CONFIG_ATH79_MACH_HIWIFI_HC6361=y
> CONFIG_ATH79_MACH_HORNET_UB=y
> CONFIG_ATH79_MACH_JA76PF=y
> CONFIG_ATH79_MACH_JWAP003=y
> +CONFIG_ATH79_MACH_MC_MAC1200R=y
> CONFIG_ATH79_MACH_MR600=y
> CONFIG_ATH79_MACH_MR900=y
> CONFIG_ATH79_MACH_MYNET_N600=y
> diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-mc-mac1200r.c
b/target/linux/ar71xx/files/arch/mips/ath79/mach-mc-mac1200r.c
> new file mode 100644
> index 0000000..6b92b9c
> --- /dev/null
> +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-mc-mac1200r.c
> @@ -0,0 +1,157 @@
> +/*
> + * MERCURY MAC1200R board support
> + *
> + * Copyright (C) 2012 Gabor Juhos <juhosg at openwrt.org>
> + * Copyright (C) 2013 Gui Iribarren <gui at altermundi.net>
> + *
> + * This program is free software; you can redistribute it and/or modify
it
> + * under the terms of the GNU General Public License version 2 as
published
> + * by the Free Software Foundation.
> + */
> +
> +#include <linux/pci.h>
> +#include <linux/phy.h>
> +#include <linux/gpio.h>
> +#include <linux/platform_device.h>
> +#include <linux/ath9k_platform.h>
> +#include <linux/ar8216_platform.h>
> +
> +#include <asm/mach-ath79/ar71xx_regs.h>
> +
> +#include "common.h"
> +#include "dev-ap9x-pci.h"
> +#include "dev-eth.h"
> +#include "dev-gpio-buttons.h"
> +#include "dev-leds-gpio.h"
> +#include "dev-m25p80.h"
> +#include "dev-spi.h"
> +#include "dev-wmac.h"
> +#include "machtypes.h"
> +
> +#define MAC1200R_GPIO_LED_WLAN2G 13
> +#define MAC1200R_GPIO_LED_WLAN5G 17
> +#define MAC1200R_GPIO_LED_SYSTEM 14
> +#define MAC1200R_GPIO_LED_WPS 11
> +#define MAC1200R_GPIO_LED_WAN 12
> +#define MAC1200R_GPIO_LED_LAN1 15
> +#define MAC1200R_GPIO_LED_LAN2 21
> +#define MAC1200R_GPIO_LED_LAN3 22
> +#define MAC1200R_GPIO_LED_LAN4 20
> +
> +#define MAC1200R_GPIO_BTN_WPS 16
> +
> +#define MAC1200R_KEYS_POLL_INTERVAL 20 /* msecs */
> +#define MAC1200R_KEYS_DEBOUNCE_INTERVAL (3 *
MAC1200R_KEYS_POLL_INTERVAL)
> +
> +#define MAC1200R_MAC0_OFFSET 0
> +#define MAC1200R_MAC1_OFFSET 6
> +#define MAC1200R_WMAC_CALDATA_OFFSET 0x1000
> +#define MAC1200R_PCIE_CALDATA_OFFSET 0x5000
> +
> +static const char *mac1200r_part_probes[] = {
> + "tp-link",
> + NULL,
> +};
> +
> +static struct flash_platform_data mac1200r_flash_data = {
> + .part_probes = mac1200r_part_probes,
> +};
> +
> +static struct gpio_led mac1200r_leds_gpio[] __initdata = {
> + {
> + .name = "mercury:green:wps",
> + .gpio = MAC1200R_GPIO_LED_WPS,
> + .active_low = 1,
> + },
> + {
> + .name = "mercury:green:system",
> + .gpio = MAC1200R_GPIO_LED_SYSTEM,
> + .active_low = 1,
> + },
> + {
> + .name = "mercury:green:wlan2g",
> + .gpio = MAC1200R_GPIO_LED_WLAN2G,
> + .active_low = 1,
> + },
> + {
> + .name = "mercury:green:wlan5g",
> + .gpio = MAC1200R_GPIO_LED_WLAN5G,
> + .active_low = 1,
> + },
> +};
> +
Although the key is called WPS/RESET , I think a reset button is more
important than a WPS button.That's just my personal opinion :)
> +static struct gpio_keys_button mac1200r_gpio_keys[] __initdata = {
> + {
> + .desc = "WPS button",
> + .type = EV_KEY,
> + .code = KEY_WPS_BUTTON,
> + .debounce_interval = MAC1200R_KEYS_DEBOUNCE_INTERVAL,
> + .gpio = MAC1200R_GPIO_BTN_WPS,
> + .active_low = 1,
> + },
> +};
> +
> +
> +static void __init mac1200r_setup(void)
> +{
> + u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
> + u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
> + u8 tmpmac[ETH_ALEN];
> +
> + ath79_register_m25p80(&mac1200r_flash_data);
> +
> + ath79_register_leds_gpio(-1, ARRAY_SIZE(mac1200r_leds_gpio),
> + mac1200r_leds_gpio);
> +
> + ath79_register_gpio_keys_polled(-1, MAC1200R_KEYS_POLL_INTERVAL,
> + ARRAY_SIZE(mac1200r_gpio_keys),
> + mac1200r_gpio_keys);
> +
> + ath79_init_mac(tmpmac, mac, 0);
> +
> + ath79_register_wmac(art + MAC1200R_WMAC_CALDATA_OFFSET, tmpmac);
> +
> + ath79_init_mac(tmpmac, mac, 1);
> + //ap9x_pci_setup_wmac_led_pin(0, 0);
> +
> + ap91_pci_init(art + MAC1200R_PCIE_CALDATA_OFFSET, tmpmac);
What? I think this function is only able to load CALDATA for ath9k
devices.Maybe I'm wrong:)
> +
> + ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE);
> +
> + ath79_register_mdio(1, 0x0);
> +
> + /* LAN */
> + ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1);
> +
> + /* GMAC1 is connected to the internal switch */
> + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
> +
> + ath79_register_eth(1);
> +
> + /* WAN */
> + ath79_init_mac(ath79_eth0_data.mac_addr, mac, 2);
> +
> + /* GMAC0 is connected to the PHY4 of the internal switch */
> + ath79_switch_data.phy4_mii_en = 1;
> + ath79_switch_data.phy_poll_mask = BIT(4);
> + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
> + ath79_eth0_data.phy_mask = BIT(4);
> + ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
> +
> + ath79_register_eth(0);
> +
> + ath79_gpio_output_select(MAC1200R_GPIO_LED_LAN1,
> + AR934X_GPIO_OUT_LED_LINK3);
> + ath79_gpio_output_select(MAC1200R_GPIO_LED_LAN2,
> + AR934X_GPIO_OUT_LED_LINK2);
> + ath79_gpio_output_select(MAC1200R_GPIO_LED_LAN3,
> + AR934X_GPIO_OUT_LED_LINK1);
> + ath79_gpio_output_select(MAC1200R_GPIO_LED_LAN4,
> + AR934X_GPIO_OUT_LED_LINK0);
> + ath79_gpio_output_select(MAC1200R_GPIO_LED_WAN,
> + AR934X_GPIO_OUT_LED_LINK4);
> +}
> +
> +MIPS_MACHINE(ATH79_MACH_MC_MAC1200R, "MC-MAC1200R",
> + "MERCURY MAC1200R",
> + mac1200r_setup);
> diff --git a/target/linux/ar71xx/generic/profiles/mercury.mk
b/target/linux/ar71xx/generic/profiles/mercury.mk
> new file mode 100644
> index 0000000..8ce864d
> --- /dev/null
> +++ b/target/linux/ar71xx/generic/profiles/mercury.mk
> @@ -0,0 +1,17 @@
> +#
> +# Copyright (C) 2015 OpenWrt.org
> +#
> +# This is free software, licensed under the GNU General Public License
v2.
> +# See /LICENSE for more information.
> +#
> +
> +
> +define Profile/MAC1200R
> + NAME:=MERCURY MAC1200R
> + PACKAGES:=kmod-ath10k
> +endef
> +
> +define Profile/MAC1200R/Description
> + Package set optimized for the MERCURY MAC1200R.
> +endef
> +$(eval $(call Profile,MAC1200R))
> diff --git a/target/linux/ar71xx/image/Makefile
b/target/linux/ar71xx/image/Makefile
> index ef52f46..9621e0b 100644
> --- a/target/linux/ar71xx/image/Makefile
> +++ b/target/linux/ar71xx/image/Makefile
> @@ -1380,6 +1380,7 @@ $(eval $(call
SingleProfile,TPLINK-LZMA,64kraw,ELM150,el-m150,EL-M150,ttyATH0,11
> $(eval $(call
SingleProfile,TPLINK-LZMA,64kraw,ELMINI,el-mini,EL-MINI,ttyATH0,115200,0x01530001,1,8Mlzma))
> $(eval $(call
SingleProfile,TPLINK-LZMA,64kraw,GLINET6408A,gl-inet-6408A-v1,GL-INET,ttyATH0,115200,0x08000001,1,8Mlzma))
> $(eval $(call
SingleProfile,TPLINK-LZMA,64kraw,GLINET6416A,gl-inet-6416A-v1,GL-INET,ttyATH0,115200,0x08000001,1,16Mlzma))
> +$(eval $(call
SingleProfile,TPLINK-LZMA,64kraw,MAC1200R,mc-mac1200r,MC-MAC1200R,ttyS0,115200,0x12000001,1,8Mlzma))
The factory image is broken since TP-LINK started to use a new firmware
format with RSA signature in China.This should be introduced in the TOH
wiki I think:)
> $(eval $(call
SingleProfile,TPLINK-LZMA,64kraw,TLMR10U,tl-mr10u-v1,TL-MR10U,ttyATH0,115200,0x00100101,1,4Mlzma))
> $(eval $(call
SingleProfile,TPLINK-LZMA,64kraw,TLMR11UV1,tl-mr11u-v1,TL-MR11U,ttyATH0,115200,0x00110101,1,4Mlzma))
> $(eval $(call
SingleProfile,TPLINK-LZMA,64kraw,TLMR11UV2,tl-mr11u-v2,TL-MR11U,ttyATH0,115200,0x00110102,1,4Mlzma))
> diff --git
a/target/linux/ar71xx/patches-3.14/736-MIPS-ath79-add-MC-MAC1200R-support.patch
b/target/linux/ar71xx/patches-3.14/736-MIPS-ath79-add-MC-MAC1200R-support.patch
> new file mode 100644
> index 0000000..bb4d584
> --- /dev/null
> +++
b/target/linux/ar71xx/patches-3.14/736-MIPS-ath79-add-MC-MAC1200R-support.patch
> @@ -0,0 +1,39 @@
> +--- a/arch/mips/ath79/Kconfig
> ++++ b/arch/mips/ath79/Kconfig
> +@@ -374,6 +374,16 @@
> + select ATH79_DEV_LEDS_GPIO
> + select ATH79_DEV_M25P80
> +
> ++config ATH79_MACH_MC_MAC1200R
> ++ bool "MERCURY MAC1200R board support"
> ++ select SOC_AR934X
> ++ select ATH79_DEV_AP9X_PCI if PCI
> ++ select ATH79_DEV_ETH
> ++ select ATH79_DEV_GPIO_BUTTONS
> ++ select ATH79_DEV_LEDS_GPIO
> ++ select ATH79_DEV_M25P80
> ++ select ATH79_DEV_WMAC
> ++
> + config ATH79_MACH_RB4XX
> + bool "MikroTik RouterBOARD 4xx series support"
> + select SOC_AR71XX
> +--- a/arch/mips/ath79/Makefile
> ++++ b/arch/mips/ath79/Makefile
> +@@ -66,6 +66,7 @@
> + obj-$(CONFIG_ATH79_MACH_JA76PF) += mach-ja76pf.o
> + obj-$(CONFIG_ATH79_MACH_JWAP003) += mach-jwap003.o
> + obj-$(CONFIG_ATH79_MACH_HORNET_UB) += mach-hornet-ub.o
> ++obj-$(CONFIG_ATH79_MACH_MC_MAC1200R) += mach-mc-mac1200r.o
> + obj-$(CONFIG_ATH79_MACH_MR600) += mach-mr600.o
> + obj-$(CONFIG_ATH79_MACH_MYNET_N600) += mach-mynet-n600.o
> + obj-$(CONFIG_ATH79_MACH_MYNET_REXT) += mach-mynet-rext.o
> +--- a/arch/mips/ath79/machtypes.h
> ++++ b/arch/mips/ath79/machtypes.h
> +@@ -89,6 +89,7 @@
> + ATH79_MACH_TEW_673GRU, /* TRENDnet TEW-673GRU */
> + ATH79_MACH_TEW_712BR, /* TRENDnet TEW-712BR */
> + ATH79_MACH_TEW_732BR, /* TRENDnet TEW-732BR */
> ++ ATH79_MACH_MC_MAC1200R, /* MERCURY MAC1200R*/
> + ATH79_MACH_TL_MR10U, /* TP-LINK TL-MR10U */
> + ATH79_MACH_TL_MR11U, /* TP-LINK TL-MR11U */
> + ATH79_MACH_TL_MR13U, /* TP-LINK TL-MR13U */
> --
> 2.1.4
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
Ah... I'm not sure I've describe what I think correctly because of my bad
english.Sorry:-)
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20150115/7864cbc8/attachment.htm>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list