[OpenWrt-Devel] [PATCH 2/6] ar8216: replace ar8xxx_rmw with ar8xxx_reg_set where appropriate
Heiner Kallweit
hkallweit1 at gmail.com
Mon Jan 12 14:16:48 EST 2015
Replace ar8xxx_rmw with ar8xxx_reg_set where appropriate.
Signed-off-by: Heiner Kallweit <hkallweit1 at gmail.com>
---
target/linux/generic/files/drivers/net/phy/ar8216.c | 13 +++++--------
target/linux/generic/files/drivers/net/phy/ar8327.c | 6 ++----
2 files changed, 7 insertions(+), 12 deletions(-)
diff --git a/target/linux/generic/files/drivers/net/phy/ar8216.c b/target/linux/generic/files/drivers/net/phy/ar8216.c
index 906dc7a..76dfcf4 100644
--- a/target/linux/generic/files/drivers/net/phy/ar8216.c
+++ b/target/linux/generic/files/drivers/net/phy/ar8216.c
@@ -742,12 +742,11 @@ ar8236_init_globals(struct ar8xxx_priv *priv)
AR8316_GCTRL_MTU, 9018 + 8 + 2);
/* enable cpu port to receive arp frames */
- ar8xxx_rmw(priv, AR8216_REG_ATU_CTRL,
- AR8236_ATU_CTRL_RES, AR8236_ATU_CTRL_RES);
+ ar8xxx_reg_set(priv, AR8216_REG_ATU_CTRL,
+ AR8236_ATU_CTRL_RES);
/* enable cpu port to receive multicast and broadcast frames */
- ar8xxx_rmw(priv, AR8216_REG_FLOOD_MASK,
- AR8236_FM_CPU_BROADCAST_EN | AR8236_FM_CPU_BCAST_FWD_EN,
+ ar8xxx_reg_set(priv, AR8216_REG_FLOOD_MASK,
AR8236_FM_CPU_BROADCAST_EN | AR8236_FM_CPU_BCAST_FWD_EN);
/* Enable MIB counters */
@@ -979,13 +978,11 @@ ar8216_set_mirror_regs(struct ar8xxx_priv *priv)
(priv->monitor_port << AR8216_GLOBAL_CPUPORT_MIRROR_PORT_S));
if (priv->mirror_rx)
- ar8xxx_rmw(priv, AR8216_REG_PORT_CTRL(priv->source_port),
- AR8216_PORT_CTRL_MIRROR_RX,
+ ar8xxx_reg_set(priv, AR8216_REG_PORT_CTRL(priv->source_port),
AR8216_PORT_CTRL_MIRROR_RX);
if (priv->mirror_tx)
- ar8xxx_rmw(priv, AR8216_REG_PORT_CTRL(priv->source_port),
- AR8216_PORT_CTRL_MIRROR_TX,
+ ar8xxx_reg_set(priv, AR8216_REG_PORT_CTRL(priv->source_port),
AR8216_PORT_CTRL_MIRROR_TX);
}
diff --git a/target/linux/generic/files/drivers/net/phy/ar8327.c b/target/linux/generic/files/drivers/net/phy/ar8327.c
index 38c11cb..b69c33b 100644
--- a/target/linux/generic/files/drivers/net/phy/ar8327.c
+++ b/target/linux/generic/files/drivers/net/phy/ar8327.c
@@ -886,13 +886,11 @@ ar8327_set_mirror_regs(struct ar8xxx_priv *priv)
(priv->monitor_port << AR8327_FWD_CTRL0_MIRROR_PORT_S));
if (priv->mirror_rx)
- ar8xxx_rmw(priv, AR8327_REG_PORT_LOOKUP(priv->source_port),
- AR8327_PORT_LOOKUP_ING_MIRROR_EN,
+ ar8xxx_reg_set(priv, AR8327_REG_PORT_LOOKUP(priv->source_port),
AR8327_PORT_LOOKUP_ING_MIRROR_EN);
if (priv->mirror_tx)
- ar8xxx_rmw(priv, AR8327_REG_PORT_HOL_CTRL1(priv->source_port),
- AR8327_PORT_HOL_CTRL1_EG_MIRROR_EN,
+ ar8xxx_reg_set(priv, AR8327_REG_PORT_HOL_CTRL1(priv->source_port),
AR8327_PORT_HOL_CTRL1_EG_MIRROR_EN);
}
--
2.2.1
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list