[OpenWrt-Devel] [PATCH] [ar71xx] Add support for MERCURY MAC1200R

[Roger Pueyo Centelles]

No adhoc nor 802.11s with the current ath10k firmware. Actually, that's
what I want it for. It's a pity the driver is not fully open source.

I've tried with firmware 999.999.0.x (
http://wireless.kernel.org/en/users/Drivers/ath10k/firmware) but it the
wireless interface is not operational and I get a bunch of kernel errors.

I agree, it doesn't make much sense to put a 10/100 switch, but it must be
cheaper than a Gb one.

Cheers,

2015-01-11 22:25 GMT+01:00 Gioacchino Mazzurco <gio at eigenlab.org>:

> On Sunday, January 11, 2015 09:30:34 PM Roger Pueyo Centelles wrote:
> > Apparently it does :)
>
> Cool!
>
>
> > The device has two radios:
> >  - 802.11abgn AR9344 SoC, ath9k, working OK
> >  - 802.11ac QCA988x, ath10k, working in AP and STA modes
>
> Doesn't support adhoc nor 802.11s with the 802.11ac :( , does it?
>
>
> > Ethernet ports are 10/100 :(
>
> It make no sense :(
> Why did they do such a stupid design?
> Moreover they advertise it as 1200Mbis lan -_-
>
> Thanks!!
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20150111/aa9432d6/attachment.htm>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel