[OpenWrt-Devel] What should I do if I want to use the RGMII interface on Ralink RT3052?

[Mikko Hissa]

> On 19 Feb 2015, at 09:45, 郭传鈜 <gch981213 at gmail.com> wrote:
> 
> Portmap?This value is only for the default VLAN config of the switch right? But the problem I'm facing is that the link status of port 5 is always "link down" even if I plugged in the network cable:-(

Actually no, the switch has like two logical switches and it doesn't forward packets between those two (LAN/WAN).
Does swconfig show the port as disabled?

> 
> 2015-02-19 15:24 GMT+08:00 Mikko Hissa <mikko.hissa at werzek.com <mailto:mikko.hissa at werzek.com>>:
> Hi!
> 
>> On 19 Feb 2015, at 04:14, 郭传鈜 <gch981213 at gmail.com <mailto:gch981213 at gmail.com>> wrote:
>> 
>> Hello,everyone!
>> There is a kind of Huawei HG255D which has an RTL8211CL Gigabit PHY and We are trying to add support for it.
>> But I can't find anything about the RGMII and mdio-bus in any dts file of rt305x-based devices:-(
>> The only device I found which used the interface is WL-351 with an RTL8366 switch  but it doesn't use the MDIO interface to control it. I tried to copy the fpa2 and fct2 value from WL-351.dts but ,of course, it doesn't work.
>> Then I tried to do the following:
>> https://github.com/981213/openwrt/commit/47fa84df4dcc9b8bfe49ed2211d463ed014e2df2 <https://github.com/981213/openwrt/commit/47fa84df4dcc9b8bfe49ed2211d463ed014e2df2>
> 
> Yes, there's that and then you need to configure registers for gdma2 in the ethernet driver... Register a second netdev and map packets, to the corresponding netdev/gdma (in/out) interface, by dma descriptors.
> 
> OR
> 
> In the dst file under the esw, change the value of portmap to 3f.
> XD
> 
> 
>> but it doesn't work too.
>> Could someone please tell me what should I do in the dts file and how can I reset the PHY?
>> 
>> 
>> Sorry for my bad English:-)
>> 
>> _______________________________________________
>> openwrt-devel mailing list
>> openwrt-devel at lists.openwrt.org <mailto:openwrt-devel at lists.openwrt.org>
>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel <https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel>
> 
> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20150219/8f0b11a8/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 842 bytes
Desc: Message signed with OpenPGP using GPGMail
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20150219/8f0b11a8/attachment.sig>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel