[OpenWrt-Devel] ar71xx update to v3.18

[John Crispin]

On 16/02/2015 21:47, Paul Blazejowski wrote:
> On Mon, 2015-02-16 at 08:10 +0100, John Crispin wrote:
>>
>> On 16/02/2015 00:15, Paul Blazejowski wrote:
>>> 00 KHz AUTO), (N/A, 2000 mBm), (0 s)
>>> [   21.730000] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz),
>>> (N/A, 2000 mBm), (0 s)
>>> [   21.740000] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz),
>>> (N/A, 2000 mBm), (N/A)
>>> [   21.750000] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz),
>>> (N/A, 0 mBm), (N/A)
>>> [   22.170000] ath9k ar934x_wmac: Direct firmware load for
>>> soc_wmac.eeprom failed with error -2
>>> [   22.180000] ath: phy0: Unable to load EEPROM file soc_wmac.eeprom
>>> [   22.190000] ath9k ar934x_wmac: failed to initialize device
>>> [   22.190000] ath9k: probe of ar934x_wmac failed with error -22
>>> [   22.200000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
>>> [   22.220000] ath9k 0000:00:00.0: Direct firmware load for
>>> pci_wmac0.eeprom failed with error -2
>>> [   22.230000] ath: phy1: Unable to load EEPROM file pci_wmac0.eeprom
>>> [   22.230000] ath9k 0000:00:00.0: Failed to initialize device
>>> [   22.240000] ath9k: probe of 0000:00:00.0 failed with error -22
>>> [   29.760000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>>
>> probably related to this -> https://dev.openwrt.org/ticket/18992
>>
>> do a "cat /tmp/sysinfo/*" please
> 
> nope sir, just replied to your other mail...but here it is again:
> 
> root at router:~# cat /tmp/sysinfo/*
> wndr3700v4
> NETGEAR WNDR3700v4
> 

the firmware loader was not enabled in 3.18 and 3.19. r44481 fixes this.
it is now working as expected on my wndr4300

i also decided to set 3.18 as the default as this was the only issue
that was reported.

thanks for testing,
	John
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel