[OpenWrt-Devel] lantiq v3.18

[John Crispin]

look at /proc/cpuinfo please and tell us how many bogomips are reported



On 13/02/2015 19:32, Daniel Gimpelevich wrote:
> On Fri, 13 Feb 2015 09:23:16 +0100, Sylwester Petela wrote:
>> PCI works, I have one more issue (present from 3.14 kernel) , unit will 
>> hang (without any errors in console output) when trying to reboot from 
>> cli/luci, but only when dsl_control is started at boot, without 
> attached 
>> line or with dsl_control  excluded from running on boot, everything 
>> works ok, even trying to stop dsl_control before reboot doesn't help. 
>> I'm thinking that dts for P-2812HNU has something to do with it, but I 
>> cannot trace it.
> 
> I'm not sure whether this is the same issue, but when I boot with the DSL 
> connected, it takes another five minutes after the console shows the line 
> "procd: - init complete -" before the DSL actually connects, and if I 
> type "time /etc/init.d/dsl_control status" after it connects and walk 
> away, it tells me it took twenty minutes to complete. This makes LuCI 
> unusable, because it tries to query the status every few seconds, 
> exhausting the RAM, which causes a reboot. This problem did not exist on 
> 3.14, so I suspect it may be related to the kernel config.
> 
> I might not be able to test anything new till the middle of next week.
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
> 
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel