[OpenWrt-Devel] raspberry pi v3.19

[Álvaro Fernández Rojas]

I tried adding support for 3.18 and I have issues booting the raspberry. There must be something wrong with the new mmc driver, because it detects the SD card insertions/extractiones, but doesn't read the partitions:
http://pastebin.com/GWFYrXnT

My patches:
http://files.noltari.es/openwrt/bcm2708/brcm2708_3-18.tgz

Regards,
Álvaro.

El 09/02/2015 a las 18:12, Florian Fainelli escribió:
> On Feb 9, 2015 4:25 AM, "John Crispin" <blogic at openwrt.org <mailto:blogic at openwrt.org>> wrote:
>>
>> Hi,
>>
>> i synced our rpi port with the upstream tree on github. it boots and i
>> can see the coloured palette test pic on the hdmi, however ethernet
>> fails to come up. i attached a uart just to find out that my rpi is
>> either broken or i am connecting it wrong.
>>
>> has anyone managed to get uart working ? to my understanding i need to
>> connect pin6 to gnd and use 8 and 10 for the 2 data lines. should i see
>> output from the bootloader prior to board detecting/loading the sd card
> 
> You will not get any UART output prior to the kernel boot, the GPU boot code does not output anything (at least not in the builds we use).
> 
> Could you share the boot log to see if there is anything obvious?
> 
>>
>>         John
>> _______________________________________________
>> openwrt-devel mailing list
>> openwrt-devel at lists.openwrt.org <mailto:openwrt-devel at lists.openwrt.org>
>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
> 
> 
> 
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
> 
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel