[OpenWrt-Devel] [PATCH] ar71xx: ZyXEL NBG6716 leds improvement ( correction - second attempt )

[Marcin Mikołajczak]

This patch fixes LEDs in ZyXEL NBG6716
   - POWER LED was missing
   - USB LEDs incorrect order

Signed-off-by: Marcin Mikolajczak <gr4ffy at gmail.com>
---
Sorry, but this is my first patch for OpenWrt - previous one was 
splitted in two half.


Index: trunk/target/linux/ar71xx/base-files/etc/diag.sh
===================================================================
--- trunk/target/linux/ar71xx/base-files/etc/diag.sh    (wersja 44288)
+++ trunk/target/linux/ar71xx/base-files/etc/diag.sh    (kopia robocza)
@@ -130,7 +130,7 @@
                 status_led="nbg460n:green:power"
                 ;;
         nbg6716)
-               status_led="nbg6716:white:power"
+               status_led="zyxel:white:power"
                 ;;
         om2p | \
         om2pv2 | \
Index: trunk/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
===================================================================
--- trunk/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds       
(wersja 44288)
+++ trunk/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds       
(kopia robocza)
@@ -215,8 +215,8 @@
         ucidef_set_led_netdev "wan" "WAN" "zyxel:white:internet" "eth1"
         ucidef_set_led_wlan "wlan" "WLAN" "zyxel:white:wifi2g" "phy1tpt"
         ucidef_set_led_wlan "wlan5" "WLAN5" "zyxel:white:wifi5g" 
"phy0tpt"
-       ucidef_set_led_usbdev "usb1" "USB1" "zyxel:white:usb0" "1-1"
-       ucidef_set_led_usbdev "usb2" "USB2" "zyxel:white:usb1" "2-1"
+       ucidef_set_led_usbdev "usb1" "USB1" "zyxel:white:usb0" "2-1"
+       ucidef_set_led_usbdev "usb2" "USB2" "zyxel:white:usb1" "1-1"
         ;;

  om2p | \
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel