[OpenWrt-Devel] Autonegotiation problem on RTL8168evl/8111evl

[Catherine]

 Hello,

There is a problem with RTL8168evl/8111evl and driver to it r8169 on OpenWrt build for x86_64 device. The card is visible but link is not established.  
I use Asus DSL-N10E as a gateway with dhcp server on it.

Log:

[   10.731939] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[   10.753192] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xffffc9000026e000, 00:30:18:af:3e:a2, XID 0c900800 IRQ 41
[   10.785080] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]

...

[   19.937265] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   20.819531] r8169 0000:02:00.0 eth0: link down
[   27.003365] r8169 0000:02:00.0 eth0: link up
[   27.866438] r8169 0000:02:00.0 eth0: link down
[   29.907983] r8169 0000:02:00.0 eth0: link up
[   30.802642] r8169 0000:02:00.0 eth0: link down

What is the way to fix this issue? Did somebody find a resolution to it? 

Best regards,

Kate


...
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20150204/93a1bd64/attachment.htm>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel