[OpenWrt-Devel] latest trunk r48016 factory image fails to boot on wd mynet n750

[Chirag Chhatriwala]

Hello,

I had a working build r42397 which was stable enough so I didn't touch it
until today.
I built openwrt trunk r48016 (last night) and everything built without any
issues.

I like to load thing the factory image but this time loading the factory
image resulted in no internet. Router came on, I could see activity on the
indicator lights but no IP. I did notice that the front LED light do not
stay on after the factory install on this build. On a working build, the
front LED stays on (solid) when working (default config).

I have LUCI pre-baked as I use the same configs. I personally run a diff
between the configs and didn't see anything that would have broken booting
from factory flash install.

Then I reverted to a working openwrt (r46900) build that I factory-flashed
and then proceeded to do a sysupgrade of r48016 (and wipe existing
settings). This WORKED, the router boots.

Something seems to be not working with factory install, but is working with
the sysupgrade. I have no way to debug this. Just thought I should bring
this to the attention of the devs in the forum.

Thank you,
cchhat01
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20151230/f3ca7ead/attachment.htm>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel