[OpenWrt-Devel] [PATCH v2 4/5] ltq-vdsl-app: enable G.993.5 XTSE bit by default

[Mathias Kresin]

According to ITU-T G.997.1 Amendment 2 (04/2013) section 2.1, bit 3 of
XTSE octet 8 either allow or denies the initialization of G.993.5.

Even if the current redistributable xDSL firmware doesn't include
G.993.5 vectoring support, enable this bit by default to allow people to
get their G.993.5 line working using a custom xDSL firmware.

Signed-off-by: Mathias Kresin <openwrt at kresin.me>
---
 package/network/config/ltq-vdsl-app/files/dsl_control | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/package/network/config/ltq-vdsl-app/files/dsl_control b/package/network/config/ltq-vdsl-app/files/dsl_control
index f6275a0..fe098d7 100644
--- a/package/network/config/ltq-vdsl-app/files/dsl_control
+++ b/package/network/config/ltq-vdsl-app/files/dsl_control
@@ -13,18 +13,21 @@ EXTRA_HELP="	status  Get DSL status information
 
 #
 # ITU-T G.997.1 (06/2012) - Section 7.3.1.1.1 (xTU transmission system enabling (XTSE))
+# ITU-T G.997.1 Amendment 2 (04/2013) - Section 2.1 - (Vectoring mode enable (VECTORMODE_ENABLE))
 #
 # G.992.1 Annex A
 # G.992.3 Annex A / L-US1 / L_US-2 / M
 # G.992.5 Annex A / M
 # G.993.2 Annex A/B/C
-xtse_xdsl_a="04_00_04_00_4C_01_04_07"
+# G.993.5 Annex A/B/C
+xtse_xdsl_a="04_00_04_00_4C_01_04_0F"
 
 # G.992.1 Annex B
 # G.992.3 Annex B
 # G.992.5 Annex B
 # G.993.2 Annex A/B/C
-xtse_adsl_b="10_00_10_00_00_04_00_07"
+# G.993.5 Annex A/B/C
+xtse_xdsl_b="10_00_10_00_00_04_00_0F"
 
 # G.992.1 Annex B
 # G.992.3 Annex B
@@ -32,7 +35,8 @@ xtse_adsl_b="10_00_10_00_00_04_00_07"
 # G.992.5 Annex B
 # G.992.5 Annex J
 # G.993.2 Annex A/B/C
-xtse_adsl_j="10_00_10_40_00_04_01_07"
+# G.993.5 Annex A/B/C
+xtse_xdsl_j="10_00_10_40_00_04_01_0F"
 
 service_triggers() {
 	procd_add_reload_trigger network
-- 
1.9.1
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel