[OpenWrt-Devel] MT7628, IRQ GPIO

[Baptiste Clenet]

2015-12-30 11:52 GMT+01:00 Baptiste Clenet <bapclenet at gmail.com>:
> Hi,
>
> I'm working on the MT7628 board and I try to register GPIO's irq. (I
> haven't updated to kernel 4.3, I'm still on the previous version 3.18)
> I've got two interrupts on GPIO 15 and GPIO 46. I see that to register
> the interrupts it uses the internal GPIO interrupts (number 6). The
> fact is, it register one handler for internal GPIO so whenever any of
> the GPIO's irq (GPIO 15 or 46) are triggered, it always calls the same
> handler.
> Does it make sense? I may explain differently if it's not clear.
>
> How could I register both handlers? Is there a GPIO-IRQ driver which
> handle IRQ from GPIO?
>
> By the way, thank you for your work on porting mt7628 to kernel 4.3,
> I'm excited to try!
>
> Cheers,
>
> --
> Baptiste

As far as I can see in [1], it seems that it has been implemented with
the new patches. Is that right?

[1] https://dev.openwrt.org/browser/trunk/target/linux/ramips/patches-4.3/0028-GPIO-ralink-add-mt7621-gpio-controller.patch


-- 
Baptiste
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel