[OpenWrt-Devel] [PATCH] add support for WRTnode2P and WRTnode2R add led support for wrtnode platform
John Crispin
blogic at openwrt.org
Thu Dec 24 08:19:30 EST 2015
On 24/12/2015 10:16, Piotr Dymacz wrote:
> Hello,
>
> Small comment inline, below.
>
> Plus:
> 1. This patch is not for trunk, so you should add "CC" prefix in the subject.
small addition. for us to merge board support into CC it needs to first
be merged into trunk. i cannot accept a patch for CC without the
corresponding patch to trunk
> 2. Both models are very similar, my suggestion is to use common dtsi
> (ex. Lenovo Y1).
>
> Cheers,
> Piotr
>
> 2015-12-24 9:56 GMT+01:00 xzmu <xzmu at wrtnode.com>:
>> Signed-off-by: xzmu <xzmu at wrtnode.com>
>> ---
>> .../linux/ramips/base-files/etc/board.d/02_network | 2 +
>> target/linux/ramips/base-files/etc/diag.sh | 5 +
>> target/linux/ramips/base-files/lib/ramips.sh | 6 ++
>> .../ramips/base-files/lib/upgrade/platform.sh | 2 +
>> target/linux/ramips/dts/WRTNODE2P.dts | 99 ++++++++++++++++++
>> target/linux/ramips/dts/WRTNODE2R.dts | 114 +++++++++++++++++++++
>> 6 files changed, 228 insertions(+)
>> create mode 100644 target/linux/ramips/dts/WRTNODE2P.dts
>> create mode 100644 target/linux/ramips/dts/WRTNODE2R.dts
>>
>> diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
>> index d7d016b..816a1a7 100755
>> --- a/target/linux/ramips/base-files/etc/board.d/02_network
>> +++ b/target/linux/ramips/base-files/etc/board.d/02_network
>> @@ -175,6 +175,8 @@ ramips_setup_interfaces()
>> hg255d | \
>> rt-n14u | \
>> wrtnode | \
>> + wrtnode2p | \
>> + wrtnode2r | \
>> wt3020 | \
>> ur-326n4g | \
>> zbt-wa05)
>> diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
>> index a7e2501..d596b8a 100644
>> --- a/target/linux/ramips/base-files/etc/diag.sh
>> +++ b/target/linux/ramips/base-files/etc/diag.sh
>> @@ -253,6 +253,11 @@ get_status_led() {
>> zte-q7)
>> status_led="zte:red:status"
>> ;;
>> + wrtnode2r | \
>> + wrtnode2p | \
>> + wrtnode)
>> + status_led="wrtnode:blue:indicator"
>> + ;;
>> esac
>> }
>>
>> diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
>> index 4141ddd..6c74412 100755
>> --- a/target/linux/ramips/base-files/lib/ramips.sh
>> +++ b/target/linux/ramips/base-files/lib/ramips.sh
>> @@ -391,6 +391,12 @@ ramips_board_detect() {
>> *"WRTNODE")
>> name="wrtnode"
>> ;;
>> + *"WRTnode2R")
>> + name="wrtnode2r"
>> + ;;
>> + *"WRTnode2P")
>> + name="wrtnode2p"
>> + ;;
>
> Why you didn't follow previous model version naming convention (WRTNODE...)?
>
>> *"Wansview NCS601W")
>> name="ncs601w"
>> ;;
>> diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
>> index 2f64d8c..0fc5c26 100755
>> --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
>> +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
>> @@ -119,6 +119,8 @@ platform_check_image() {
>> wr6202 |\
>> wr8305rt |\
>> wrtnode |\
>> + wrtnode2r |\
>> + wrtnode2p |\
>> wt1520 |\
>> wt3020 |\
>> x5 |\
>> diff --git a/target/linux/ramips/dts/WRTNODE2P.dts b/target/linux/ramips/dts/WRTNODE2P.dts
>> new file mode 100644
>> index 0000000..59866dd
>> --- /dev/null
>> +++ b/target/linux/ramips/dts/WRTNODE2P.dts
>> @@ -0,0 +1,99 @@
>> +/dts-v1/;
>> +
>> +/include/ "mt7628an.dtsi"
>> +
>> +/ {
>> + compatible = "mediatek,wrtnode2p", "mediatek,mt7628an-soc";
>> + model = "WRTnode2P";
>> +
>> + chosen {
>> + bootargs = "console=ttyS0,115200";
>> + };
>> +
>> + pinctrl {
>> + state_default: pinctrl0 {
>> + gpio {
>> + ralink,group = "i2c", "gpio", "jtag";
>> + ralink,function = "gpio";
>> + };
>> + };
>> + };
>> +
>> + palmbus at 10000000 {
>> + spi at b00 {
>> + status = "okay";
>> +
>> + m25p80 at 0 {
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + compatible = "w25q256";
>> + reg = <0 0>;
>> + linux,modalias = "m25p80", "w25q256";
>> + spi-max-frequency = <10000000>;
>> + m25p,chunked-io = <32>;
>> +
>> + partition at 0 {
>> + label = "u-boot";
>> + reg = <0x0 0x30000>;
>> + read-only;
>> + };
>> +
>> + partition at 30000 {
>> + label = "u-boot-env";
>> + reg = <0x30000 0x10000>;
>> + read-only;
>> + };
>> +
>> + factory: partition at 40000 {
>> + label = "factory";
>> + reg = <0x40000 0x10000>;
>> + read-only;
>> + };
>> +
>> + partition at 50000 {
>> + label = "firmware";
>> + reg = <0x50000 0x1fb0000>;
>> + };
>> + };
>> + };
>> +
>> + uart1 at d00 {
>> + status = "okay";
>> + };
>> +
>> + };
>> +
>> + ethernet at 10100000 {
>> + mtd-mac-address = <&factory 0x4>;
>> + ralink,port-map = "llllw";
>> + };
>> +
>> + sdhci at 10130000 {
>> + status = "okay";
>> + };
>> +
>> + pcie at 10140000 {
>> + status = "okay";
>> + };
>> +
>> + gpio-leds {
>> + compatible = "gpio-leds";
>> + indicator {
>> + label = "wrtnode:blue:indicator";
>> + gpios = <&gpio1 9 1>;
>> + };
>> + };
>> +
>> + gpio-keys-polled {
>> + compatible = "gpio-keys-polled";
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + poll-interval = <20>;
>> + reset {
>> + label = "reset";
>> + gpios = <&gpio0 5 1>;
>> + linux,code = <0x198>;
>> + };
>> + };
>> +};
>> +
>> diff --git a/target/linux/ramips/dts/WRTNODE2R.dts b/target/linux/ramips/dts/WRTNODE2R.dts
>> new file mode 100644
>> index 0000000..7f383ad
>> --- /dev/null
>> +++ b/target/linux/ramips/dts/WRTNODE2R.dts
>> @@ -0,0 +1,114 @@
>> +/dts-v1/;
>> +
>> +/include/ "mt7628an.dtsi"
>> +
>> +/ {
>> + compatible = "mediatek,wrtnode2r", "mediatek,mt7628an-soc";
>> + model = "WRTnode2R";
>> +
>> + chosen {
>> + bootargs = "console=ttyS0,115200";
>> + };
>> +
>> + pinctrl {
>> + state_default: pinctrl0 {
>> + gpio {
>> + ralink,group = "i2c", "gpio", "wled_an";
>> + ralink,function = "gpio";
>> + };
>> + };
>> + };
>> +
>> + palmbus at 10000000 {
>> + spi at b00 {
>> + status = "okay";
>> +
>> + m25p80 at 0 {
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + compatible = "w25q256";
>> + reg = <0 0>;
>> + linux,modalias = "m25p80", "w25q256";
>> + spi-max-frequency = <10000000>;
>> + m25p,chunked-io = <32>;
>> +
>> + partition at 0 {
>> + label = "u-boot";
>> + reg = <0x0 0x30000>;
>> + read-only;
>> + };
>> +
>> + partition at 30000 {
>> + label = "u-boot-env";
>> + reg = <0x30000 0x10000>;
>> + read-only;
>> + };
>> +
>> + factory: partition at 40000 {
>> + label = "factory";
>> + reg = <0x40000 0x10000>;
>> + read-only;
>> + };
>> +
>> + partition at 50000 {
>> + label = "firmware";
>> + reg = <0x50000 0x1fb0000>;
>> + };
>> + };
>> +
>> +
>> + spidev at 1 {
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + compatible = "spidev";
>> + reg = <1 0>;
>> + linux,modalias = "spidev", "spidev";
>> + spi-max-frequency = <10000000>;
>> + };
>> + };
>> +
>> + uart1 at d00 {
>> + status = "okay";
>> + };
>> +
>> + i2c at 900 {
>> + status = "okay";
>> + };
>> +
>> + };
>> +
>> + ethernet at 10100000 {
>> + mtd-mac-address = <&factory 0x4>;
>> + ralink,port-map = "llllw";
>> + };
>> +
>> + sdhci at 10130000 {
>> + status = "okay";
>> + };
>> +
>> + pcie at 10140000 {
>> + status = "okay";
>> + };
>> +
>> + gpio-leds {
>> + compatible = "gpio-leds";
>> + indicator {
>> + label = "wrtnode:blue:indicator";
>> + gpios = <&gpio1 12 1>;
>> + };
>> + };
>> +
>> + gpio-keys-polled {
>> + compatible = "gpio-keys-polled";
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + poll-interval = <20>;
>> + reset {
>> + label = "reset";
>> + gpios = <&gpio0 5 1>;
>> + linux,code = <0x198>;
>> + };
>> + };
>> +
>> +};
>> +
>> --
>> 2.1.4
>> _______________________________________________
>> openwrt-devel mailing list
>> openwrt-devel at lists.openwrt.org
>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list