[OpenWrt-Devel] [PATCH 2/3] ar71xx: add support for QCA956x ethernet

[p.wassi at gmx.at]

Ok, I see.
At first I did not test 10MBit links, but then I thought for completeness' sake...

I just added 0x1313 to the board config, so it won't get overriden by the
default value.

I'm currently doing a last test run of my patch for UAPAC LITE support and
will then submit it to the mailinglist.

Regards,
P.Wassi


> > Hi Roman,
> >
> > are you sure about the value of QCA956X_PLL_VAL_10,
> > which is 0x1919 in your patch?
> >
> > At least for the UAPAC LITE I have the problem that packet transmission
> > on 10MBit/s links does not work with 0x1919.
> > Instead, with QCA956X_PLL_VAL_10 = 0x1313 everything is fine.
> >
> > Is this specific to the UAPAC LITE or the QCA9563?
> 
> Honestly I don't remember where it comes from, Possibly from codeaurora repo.
> So no, I'm not sure. But still it can be overriden from board file.
> Sorry didn't bother testing with 10Mbit links :)
> 
> Regards,
> Roman
> 
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel