[OpenWrt-Devel] sunxi: BananaPi reboot problem

[Gerhard Bertelsmann]

Hi Zoltan,

Am 2015-12-19 20:47, schrieb Zoltan HERPAI:
> Hi Gerhard,
> 
> On Sat, 19 Dec 2015, Gerhard Bertelsmann wrote:
> 
>> Hi,
>> 
>> I have a problem with my BananaPi rebooting with actual trunk 
>> (r47935):
>> 
> [...]
>> scanning bus 0 for devices... 1 USB Device(s) found
>> scanning bus 2 for devices... 1 USB Device(s) found
>> Hit any key to stop autoboot:  0
>> switch to partitions #0, OK
>> mmc0 is current device
>> data abort
>> pc : [<7f67945c>]          lr : [<7f6b1040>]
>> reloc pc : [<4a01845c>]    lr : [<4a050040>]
>> sp : 7f238cd8  ip : 00000001     fp : 00000018
>> r10: 7f26f480  r9 : 7f240ee0     r8 : 00000000
>> r7 : 00000000  r6 : 7f26f538     r5 : 7f26f4d0  r4 : 00000018
>> r3 : 7f26f3d0  r2 : 7f6b1140     r1 : 00000021  r0 : 7f6b1143
>> Flags: Nzcv  IRQs off  FIQs off  Mode SVC_32
>> Resetting CPU ...
>> 
>> resetting ...
>> 
>> U-Boot SPL 2015.07 (Dec 19 2015 - 13:25:28)
>> 
>> ###################################################################
>> 
>> The BananaPi loops, throw the exception and can't boot the image -> 
>> boots again.
>> If I power cycle the BPi everything is fine and the BPi boots.
>> Until I reboot -> it loops again.
>> 
>> If I switch to GCC 4_8_LINARO everything is fine - strange.
>> 
>> Does anybody know why the BPi behaves so strange ?
> 
> Which BPi model is this, standard BananaPi or BananaPro?

it's a standard Banana Pi.

> 
> Thanks,
> Zoltan H

Regards

Gerd
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel