[OpenWrt-Devel] Ubiquiti UniFI AC Lite

[p.wassi at gmx.at]

Hi Andrew,

besides the real-life testing, which still has to be done,
the single issue is with the eth0/phy, which only works on GBit links.
To be honest, I have no idea what might be the cause for this.

I think, if there is no news within the next days on this issue,
I may open a seperate thread on this problem (AR8033 + SGMII), as
this will possibly affect all devices with this HW configuration.

-- P.Wassi



> Hi Wassi,
> 
> great work, let me see how can I help.
> 
> On 16/12/15 07:05, p.wassi at gmx.at wrote:
> > Hi there,
> >
> > This message should be a response to the thread in
> > https://lists.openwrt.org/pipermail/openwrt-devel/2015-December/037808.html
> >
> > You can see the status of the port for Ubiquiti UniFi AP AC LITE
> > on this page:
> > https://pwassi.privatedns.org/openwrt/unifiac/
> > Here, also additional information on the issues with eth0/phy is
> > given.
> >
> > -- P.Wassi
> > _______________________________________________
> > openwrt-devel mailing list
> > openwrt-devel at lists.openwrt.org
> > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
> 
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel